复合材料翼面结构的自振和颤振分析及优化设计

 建立复合材料翼面结构的有限元静力分析模型。采用柔度方法作静力模型到动力模型的转变,进行结构固有特性分析,并研究了频率约束下的优化设计。运用亚音速马蹄涡——振荡偶极子格网法计算了谐振翼面的三维非定常气动力,并对两种真实翼面进行了颤振分析,结果令人满意。推导了非定常气动力和颤振响应参数对设计变量的导数,研究了颤振约束下的优化设计。     

Improved Switching Converter Model Using Discrete and Averaging Techniques

The nonlinear modeling and analysis of dc-dc converters has been done by averaging and discrete-sampling techniques. The averaging technique is simple, but inaccurate, as the modulation frequencies approach the theoretical limit of one-half the switching frequency. The discrete technique is accurate even at high frequencies, but is very complex and cumbersome. An improved model is developed by combining the aforementioned techniques. This new model is easy to implement in circuit and state variable forms and is accurate to the theoretical limit.     

Nondestructive Characterization of RBSOA of High-Power Bipolar Transistors

Reverse-bias safe operating area (RBSOA) of high-power Darlington transistors is characterized using a 120 A/1000 V nondestructive reverse-bias second breakdown tester designed and fabricated at Virginia Polytechnic Institute and State University. Elaborate RBSOA characteristics are generated with different forward/reverse base drives and collector current levels. The effects of elevated case temperature and second-base drive on RBSOA of four-terminal Darlington devices are also discussed.     

喷雾运动初始条件问题的研究

根据所完成的流动环境中颗粒在初始区域内速度分布的测量结果，对颗粒运动初始条件的问题进行了全面的研究，提出了统计性，随机性和确定性的三种初始条件及其数学处理方法，在此基础上，应用喷雾两相流的数值方法，计算了喷雾的运动，比较了不同初始条件对计算结果的影响，并将所得计算结果与实验结果做了比较，两者符合较好。     

动力伞结构强度计算

本文分析动力伞结构的受力状态，并对主要承力构件进行了强度及稳定性计算，结果表明结构是安全可靠的。     

压电纤维复合材料的研究

以提高交叉指形电极压电纤维复合材料诱导应变和挟持应力为目的,采用有限元软件ANSYS分析了电极区聚合物参数、交叉指型电极结构和压电相体积分数对压电纤维复合材料诱导应变和挟持应力的影响。结果表明：增加电极区聚合物的介电常数或减小电极区聚合物的厚度,能够提高元件的诱导应变和挟持应力,元件诱导应变最大可达173με;减小分支电极的周期或者适当增大分支电极的宽度,可以有效地提高元件的作动性能;提高压电纤维体积分数,有利于提高元件的作动性能。     

Comparison of half-bridge off-line, ZCS-QRC and ZVS-MRC

The performance of the half-bridge (HB) zero-current-switched (ZCS) quasi-resonant converter (QRC) and zero-voltage-switched (ZVS) multiresonant converter (MRC) is compared with respect to their efficiency, input voltage range, semiconductor stresses, power density, and reliability. The efficiency of the HB ZVS-MRC at a given nominal input is shown to be highly dependent on the range of the input voltage, and it suffers when the converter has to be designed to cover a wide range. However, this is not the case for the HB ZCS-QRC. Experimental versions of the HB ZCS-QRC and HB ZVS-MRC were designed for the input voltage range from 150 to 350 V and a maximum output power of 100 W, under the same constraints, to facilitate their comparison     

三维侧面突扩燃烧室冷态气流场的数值模拟

本文对四侧30°进气并带有进气管道和尾喷口的突扩燃烧室冷态气流场进行了数值模拟.对这种复杂非规则边界的计算区域,首次采用分段算法进行计算.结果表明:分段算法可以提高网络利用率,缩短机时,消除虚假扩散,提高计算准确度,计算结果与试验结果基本符合.     

Analysis and Design of Series Resonant Converter by State-Plane Diagram

Analysis based on the state-plane diagram is given for series resonant converters operating in the frequency range 0.5 ? fs/fo ? 1.0. When the voltages and currents in the converter are normalized, design parameters take on special geometric meanings in the normalized state diagram. Examples of converter design using graphical methods are given for the cases of ? and ? control. Control characteristics of the converter operating in the continuous conduction mode are derived. The concept of the energy reflection coefficient is introduced as a measure of power transfer efficiency in the converter design.     

Extensions of the Discrete-Average Models for Converter Power Stages

An improved power converter model is developed by combining the average and discrete modeling techniques. The parameter determination of the proposed discrete-average model is shown to be dependent on the type of duty cycle control law and the nature of the error processor used in the feedback loop. Furthermore, the paper pinpoints deficiencies of the conventional loop gain measurement technique which is widely used in industries.