Stochastic Dynamic System Suboptimal Control with Uncertain Parameters

The control of a linear system with random coefficients is studied here. The cost function is of a quadratic form and the random coefficients are assumed to be partially observable by the controller. By means of the stochastic Bellman equation, the optimal control of stochastic dynamic models with partially observable coefficients is derived. The optimal control is shown to be a linear function of the observable states and a nonlinear function of random parameters. The theory is applied to an optimal control design of an aircraft landing in wind gust.     

高负荷跨音速复合气冷涡轮叶片的试验研究

在燃气涡轮研究所 ( GTE)的涡轮叶片综合冷却效果试验器上对四套大载荷跨音速复合式气冷涡轮叶片 (多种气膜孔方案 ) ,成功地进行了 2 90小时试验。试验结果表明 ,导叶在 2 - 8% ,动叶在 1- 6%宽广的冷气流量比范围内 ,具有良好的冷却特性。此外还分析了叶片参数对冷却效果的影响     

Parallel resonant converter with LLC-type commutation

It is shown that by using a proper transformation of state variables, the third-order system of the parallel resonant converter (PRC) with LLC-type commutation can be analyzed by means of a two-dimensional state-plane diagram. A set of characteristic curves which can be used for the converter design is derived from the analysis. It is shown from these curves that the converter possesses more desirable features than the conventional PRC     

Investigations of Stability & Dynamic Performances of a Current-Injected Regulator

The stability and dynamic performances of a buck/boost regulator employing a current-injected control are examined. Small-signal models for the power state, the multiloop error processor, and the duty-cycle pulse modulator are developed. The error-processor model which incorporates the current-injected loop, the dc loop, and the compensation network permits evaluation of the effects of each individual control loop and their combined efforts toward shaping the performance characteristics of the closed-loop system. Comparisons are made between this modeling approach and earlier approaches. Some important yet subtle dissimilarities are discussed. This model predicts the constant-frequency 50-percent duty-cycle instability which is inherent to the current-injected control.     

速率陀螺仪扭杆扭转刚度及迟滞角测试装置的研究

通过对现有速率陀螺仪中微小弹性元件扭杆扭转刚度及迟滞角测试方法的研究，运用了新的测试方法，重新对测试装置进行了设计并引入了单片机控制系统，提高了测试方法的自动化程度。     

大曲率弯道和叶栅内的湍流数值模拟

本文在贴体曲线坐标系下应用非交错网格技术，发展了适于求解复杂流动的压力修正算法，采用速度的协变物理分量为动量方程的求解变量，推导得出一个适于任何曲线坐标系下控制单元体界面流通量的插值模式，可以有效地抑制不合理的波动压力场，计算表明，算法稳定收敛，计算值与试验值吻合良好，同时能预示通道内复杂的流动现象。     

转轴位置对俯仰动态特性的影响

研究了转轴位置对机翼、机身和三个组合体上翼面的动态特性的影响，对于机翼和机身，当转轴位置后移时其动态迟滞效应更为强烈。当翼面处于转轴之前，上仰时会出现更为的动态迟滞效应。因此鸭翼达到失速状态较晚。而当翼面处于转轴之后时，如尾翼，将会更早地出现动失速，转轴位置对动态迟滞特性的影响可以认为主要是由于俯仰运动时的动态洗流影响所导致的实际有效迎角的变化。由此影响了动态分离涡及其发展。     

Multiposition alignment of strapdown inertial navigation system

The authors demonstrate that the stationary alignment of strapdown inertial navigation system (SDINS) can be improved by employing the multiposition/technique. Using an observability analysis, it is shown that an optimal two-position alignment not only satisfies complete observability conditions but also minimizes alignment errors. This is done by analytic rank testing of the stripped observability matrix and numerical calculation of the error covariance. It is also shown that an optimal three-position alignment accelerates the convergence of the alignment error compared with two-position alignment     

投资项目经济评价的意义,方法及程序

经济评价是项目投资风险分析的重要工作。本文阐述了投资项目经济评价的目的，意义，内容及特点，介绍了经济评价的方法及程序；提出了经济评价工作中应注意的事项。     

超音速燃烧室燃烧效率数学模型及气流状态参数的计算

本文分析及提出了超音速燃烧冲压发动机燃烧室燃烧效率的数学模型.该模型综合了氢气喷射方式、燃烧室进口气流参数以及燃烧室结构的影响因素.用这一数学模型求解一组一元流方程.计算出通过燃烧室的气流状态参数,计算结果与试验数据对比,证明这个模型是适用的.