航天器公用空间搭载试验平台设计

我国航天器搭载试验包括空间材料实验、航天医学实验和航天新技术验证试验,具有数据量大、需要实时传输、工作模式多样等特点。文章根据试验项目的需求,设计了应用于低轨道航天器的支持各类空间搭载试验项目的公用试验平台。地面测试验证和在轨运行情况表明,该平台在不影响飞行器平台安全的同时,满足了对试验项目的工作控制、遥测监视及试验数据传输管理的任务要求。     

Accuracy assessment of single and double difference models for the single epoch GPS compass

The single epoch GPS compass is an important field of study, since it is a valuable technique for the orientation estimation of vehicles and it can guarantee a total independence from carrier phase slips in practical applications. To achieve highly accurate angular estimates, the unknown integer ambiguities of the carrier phase observables need to be resolved. Past researches focus on the ambiguity resolution for single epoch; however, accuracy is another significant problem for many challenging applications. In this contribution, the accuracy is evaluated for the non-common clock scheme of the receivers and the common clock scheme of the receivers, respectively. We focus on three scenarios for either scheme: single difference model vs. double difference model, single frequency model vs. multiple frequency model and optimal linear combinations vs. traditional triple-frequency least squares. We deduce the short baseline precision for a number of different available models and analyze the difference in accuracy for those models. Compared with the single or double difference model of the non-common clock scheme, the single difference model of the common clock scheme can greatly reduce the vertical component error of baseline vector, which results in higher elevation accuracy. The least squares estimator can also reduce the error of fixed baseline vector with the aid of the multi-frequency observation, thereby improving the attitude accuracy. In essence, the “accuracy improvement” is attributed to the difference in accuracy for different models, not a real improvement for any specific model. If all noise levels of GPS triple frequency carrier phase are assumed the same in unit of cycles, it can be proved that the optimal linear combination approach is equivalent to the traditional triple-frequency least squares, no matter which scheme is utilized. Both simulations and actual experiments have been performed to verify the correctness of theoretical analysis.     

带变速控制力矩陀螺的航天器自适应姿态控制

航天器高精度姿态控制容易受到参数误差的影响,自适应控制能够合理地估计参数,使基于模型的控制器设计易于实现。自适应参数分为主星体惯量、变速控制力矩陀螺框架转子惯量及动摩擦系数3组,按参数分组对带变速控制力矩陀螺的航天器详细动力学模型进行变换,采用Lyapunov方法设计出姿态控制器、变速控制力矩陀螺群操纵律及参数自适应更新律,操纵律中引入加权矩阵以缓解陀螺奇异问题。理论分析和数值仿真表明闭环姿态控制系统全局一致最终有界稳定,参数自适应更新能有效减小角速度跟踪误差,使姿态四元数误差收敛更快。参数估计虽然不能准确收敛到其真值上,但均在可接受的范围内。     

基于Kalman滤波的GPS跟踪环路晶振闪烁噪声建模方法

由于晶振频率漂移对GPS接收机的载波相位和频率跟踪带来了误差,在载波跟踪系统中需要对晶振误差进行建模。传统基于Kalman滤波的跟踪方法无法对非白的闪烁晶振误差进行准确建模,导致跟踪环路建模产生一定的误差。针对上述问题,文章重点分析了晶振的频域模型建模过程和噪声协方差求解问题,提出了Kalman滤波中晶振闪烁噪声的近似建模方法,并用实际卫星数据验证了建模的正确性。     

Magnetometer Compensation Scheme and Experimental Results on ZDPS-1A Pico-satellite

In a pico-satellite with small volume, measurements from on-board three-axis magnetometer (TAM) are not accurate, as it can be easily disturbed by other electronic systems. To improve its accuracy, a scheme of compensation methods is introduced in this article. The scheme is based on an improved measurement model of pico-satellite TAM, and it mainly consists of three steps. First, in satellite design stage, several techniques are recommended to simplify the afterwards compensations. Then after satellite assembly, TAM ground tests and pre-launch calibration with least-square batch filter are introduced to improve magnetometer performance. At the end, a post-launch calibration with unscented Kalman filter (UKF) is implemented with in-orbit data. The compensation scheme is used in the development of Chinese pico-satellite ZDPS-1A made by Zhejiang University. Results show that with the introduced compensation scheme, the maximum error of ZDPS-1A TAM can be reduced from 80 mG to 6 mG (1 G=10-4 T).     

使用地磁脉动参数定量预报地球同步轨道相对论电子通量的建模研究

磁层超低频波(ULF波)对种子电子的加速机制是磁层相对论电子产生的一个重要机制, 而地磁脉动参数可以作为此机制的有效指标. 本文采用地磁脉动参数作为输入参数, 借鉴线性预测滤波器技术, 构建一个多参量非线性函数, 进而利用此函数以及卡尔曼滤波技术, 建立一个地球同步轨道相对论电子通量日积分值预报模式, 提供提前一天的预报值. 使用2004年数据对该模式进行训练, 预报结果的预报效率为0.73, 线性相关系数为0.85. 使用2005-2006年的数据对该模式进行测试, 预报值与实测值之间的线性相关系数为0.83, 预报效率为0.69, 相比Persistence模式具有较大提升, 与仿REFM模式的预报效率相当      

一种低干扰力矩的三自由度球面磁轴承

提出一种低干扰力矩的三自由度球面磁轴承结构,球面磁轴承定、转子均采用球面结构。当磁通作用在转子的球形包络面时,产生的电磁力会指向转子球心,不会对转子产生干扰力矩,但少量的漏磁磁通会作用在转子的非球形平面上,导致低干扰力矩的出现。利用等效磁路法对球形转子偏转时轴向部分漏磁导致的干扰力矩进行分析,得出干扰力矩的数学表达式。运用有限元法分析球面磁轴承和柱面磁轴承产生偏转时的干扰力矩,结果表明干扰力矩随着转子偏转角度的增加而增大,当转子偏转角达到最大允许值0.3°时,球面磁轴承与柱面磁轴承相比干扰力矩减小两个数量级。球面磁轴承的低干扰力矩特性决定其特别适用于磁悬浮控制力矩陀螺,可提高陀螺的控制精度,在磁悬浮高能密度电机、其他飞轮系统等场合具有广阔的应用前景。     

A new approach based on crater detection and matching for visual navigation in planetary landing

This paper provides an approach of crater detection and matching to visual navigation in planetary landing missions. The approach aims to detect craters on the planetary surface and match them to a landmark database during the descent phase of a planetary landing mission. Firstly an image region pairing method is proposed to detect the crater by using an image region feature detector. Then a WTA-rule is adopted to match the detected crater to the crater in database. To further reduce the false matching rate, an efficient method for reducing false matches using parameters of crater in 3-D database is proposed. Real images of planetary terrain and a semi-physical planetary landing simulation platform are utilized to test the performance of the approach, simulation results show the proposed approach is able to match the required number of craters to the database for pin-point planetary landing with a low rate of false detection and false matching, which will lead to an improved planetary landing precision.     

表面粗糙或带凸起转盘风阻扭矩实验

为研究壁面不同粗糙程度以及带有螺栓等表面凸起的转盘风阻扭矩特性,建立了一个转盘扭矩测量实验台.自由盘测量结果与经典经验关系式较好的符合度验证了测量方法的准确性.分析研究了在不同粗糙度以及附有6种凸起结构的转盘风阻扭矩规律.结果表明,壁面的粗糙会增大转盘受到的扭矩,在所测量旋转雷诺数范围内,从气动光滑一直到粗糙高度0.2 mm,扭矩系数增大1倍.基于气动光滑自由盘经验关系式进一步总结出相对粗糙度对于风阻扭矩的影响系数.对比6种凸起引起的风阻扭矩特性发现,叶型凸起会大幅降低风阻扭矩.凸起安装迎风角度的改变会带来10%的风阻扭矩差别.结合自由光滑盘扭矩系数经验关系式,总结出不同凸起形状对于扭矩系数的影响因数.     

多站时差定位关键技术研究

提出一种基于机动平台的电子侦察目标精确定位方法,利用多站观测获得雷达辐射源时差信息,通过定位跟踪算法实现目标位置精确估计。该方法具有较大的灵活性,适用于任意机动观测平台,且可方便地推广应用于更多机动平台组网观测,以提高侦察定位精度和稳健性。分析了精确时差测量、辐射源定位跟踪等关键技术,并进行了性能分析仿真。