基于量子化、芯片化的先进计量测试技术发展动态

计量是国家质量基础的重要组成部分,产品质量的提升离不开科学、精准的计量。工业发达国家极为重视计量测试技术的发展。通过搜集、整理量子效应计量、芯片级计量等国内外大量文献资料,归纳分析了近年来国外先进计量测试技术发展动态与趋势。以量子技术和基本物理常数为基础建立量子计量基标准,将大幅提高测量准确度和稳定性,结合量子效应的微加工技术实现芯片尺度的测量等,微纳尺度计量技术也在科学研究、精密测量、智能制造等领域得到广泛应用。本文可为我国计量技术发展提供借鉴。     

飞机舱门失效乘客减载计算方法的探讨

从适航当局、航空器制造商要求出发,从适航角度探寻了飞机舱门失效时需要进行旅客人数减载的原因。根据FAA、EASA、CAAC对各种机型舱门失效的要求,对比分析了各民航体系的要求差异,总结了舱门失效时计算旅客人数减载量的方法。在舱门失效对旅客人数进行减载时,航空公司需要综合考虑航班是否为跨水航班、舱门性能、救生筏性能。根据实际飞机客舱布局,结合航班的销售情况,在满足适航要求的同时,将因客舱门失效带来的经济损失降到最低。通过公式和表格,可以比较迅速地完成旅客人数减载量计算和减载区域指定。最后根据分析和实例计算,发现FAA体系下计算方法简单,但是对减载区域的限制比较严格;EASA计算方法比较繁琐,但在指定减载区域时比较灵活。     

超临界CO2技术对空心/实心石英混编纤维表面改性

采用热处理+溶剂浸洗+超临界CO2技术对空心/实心石英混编纤维表面进行预处理,同时利用超临界流体的携带与渗透作用,将KH-560偶联剂引入纤维表面进行改性。采用接触角测试、表/界面张力测试、树脂吸附量测试、力学性能测试、扫描电镜等分别测试纤维表面能、胶液表面张力与接触角、胶液与纤维浸润性,观察纤维表面形貌结构,分析复合材料的力学与介电性能。结果表明:采用热处理+溶剂浸洗+超临界CO2技术可有效去除空心/实心石英混编纤维表面浸润剂,提高纤维表面能,促进胶液与纤维的完全浸润,最终改善复合材料力学与介电性能。     

民用飞机燃油箱系统闪电防护分析方法研究

民机燃油箱系统的闪电防护是燃油箱安全的重要研究范畴,本文依据FAA的25-146号修正案和咨询通告AC25.954-1,介绍了民用飞机燃油箱系统闪电防护分析方法。在点火源防护分析思路的基础上,针对闪电引起的点火源,在明确飞机闪电分区后,可通过容错类设计或非容错类设计分别开展分析。针对容错类设计,可仅通过证明防护设计特征有效且可靠来表明符合性,无需进一步分析失效概率。针对非容错类设计,通过定性和定量分析法进行评估。在定性分析时,需评估非容错特征失效且引起点火源的概率小于1E-5。在定量分析中,可结合燃油箱可燃性、关键闪电和防护特征失效概率确保闪电引起燃油蒸气点燃的概率为极不可能。同时,根据闪电环境定义的电流振幅和波形对防护设计特征进行有效性验证。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

RNSS/INS深耦合高动态导航接收机测试方法研究CSCD

卫星导航和惯性导航采用深耦合方式实现导航作为世界上最先进的导航形式,在国防中的应用越来越广泛,但其在高动态下的性能需要验证。当前针对深耦合高动态下导航接收机的测试研究较少,本文介绍了基于卫星信号模拟器的测试系统组成及测试用高动态场景,运用模拟测试原理,通过对导航接收机在高动态下定位速度和跟踪灵敏度的测试及其结果分析,验证了导航接收机的深耦合功能,对此类接收机的测试方法进行了初步探究。     

卫星控制系统测试数据自动判读系统设计

针对卫星控制系统测试数据类型多和数据量大的特点,人工判读方式存在判读时间长和判读精度不够高等不足,分析了卫星控制系统测试数据的变化规律,建立了测试数据的判读规则,在此基础上完成自动判读方法设计和自动判读系统设计,该系统能够按照设置的判读规则进行自动判读,对判读结果进行实时显示和存储,提高了测试效率和判读的准确性.