Analysis of stress-strained state in blanks at multi-pass rotary drawing of cylindrical parts

Some characteristic zones of parts shaped by the multi-pass rotary drawing are presented. Also given are the analytical relations determining deformations in two directions within these zones and recommendations useful to calculate the values of stresses.     

Analysis of conventional and asymmetric aircraft configurations using CEASIOM

One of the main drivers behind the SimSAC project and the CEASIOM software is to bring stability analysis and control system design earlier into the aircraft conceptual design process. Within this paper two very different aircraft are considered, a conventional T-tail based on the existing EA500 Very Light Jet and the second, a novel Z-wing configuration known as the GAV or general aviation vehicle. The first aircraft serves as a baseline comparison for the second, and the cruise case is considered as a benchmark for identifying potential drag reductions and aircraft stability characteristics. CEASIOM, the Computerised Environment for Aircraft Synthesis and Integrated Optimisation Methods, is used to generate aerodynamic data sets for both aircraft, create trim conditions and the associated linear models for classical stability analysis. The open-loop Z-wing configuration is shown to display both highly unstable and coupled modes before a multivariable Stability Augmentation System (SAS) is applied both to decouple and stabilise the aircraft. Within this paper, these two aircraft provide a test case with which to demonstrate the capabilities of the CEASIOM environment and the tools which have been developed during the SimSAC project. This new software suite is shown to allow conceptual development of unconventional novel configurations from mass properties through adaptive-fidelity aerodynamics to linear analysis and control system design.     

Black Hole Studies: Overview and Outlook

In this article, I will attempt to give an overview of the motivations for studying black holes and of the current major problems in the field. I will also give some perspectives on what can be done in the future, focusing on instrumentation which has already been approved. This chapter will necessarily be more speculative than the other chapters in this volume.     

Signatures of the Sudden Stratospheric Warming events of January–February 2008 in Seoul,S. Korea

The period January–February 2008 was characterized by four Sudden Stratospheric Warmings (SSWs) in the Northern Hemisphere, of which the last warming, at the end of February 2008, was a major warming. A significant decrease in mesospheric water vapour (H₂O) of more than 2 ppmv (∼40%) was observed by the ground-based microwave (GBMW) radiometer in Seoul, S. Korea [37.3°N, 126.3°E] during the major SSW. A comparison with ground-based mesospheric H₂O observations from the mid-latitude station in Bern [46.9°N, 7°E] revealed an anticorrelation in the mesospheric H₂O data during the major SSW. In addition, prior to the major warming, strong periodic fluctuations were recorded in the Aura MLS vertical temperature distribution between 15 and 0.05 hPa at Seoul. The mesospheric temperature oscillation was found to have a period of ∼10–14 days with a persistency of 3–4 cycles.     

Modeling of Ground Deformation and Shallow Surface Waves Generated by Martian Dust Devils and Perspectives for Near-Surface Structure Inversion

We investigated the possible seismic signatures of dust devils on Mars, both at long and short period, based on the analysis of Earth data and on forward modeling for Mars. Seismic and meteorological data collected in the Mojave Desert, California, recorded the signals generated by dust devils. In the 10–100 s band, the quasi-static surface deformation triggered by pressure fluctuations resulted in detectable ground-tilt effects: these are in good agreement with our modeling based on Sorrells’ theory. In addition, high-frequency records also exhibit a significant excitation in correspondence to dust devil episodes. Besides wind noise, this signal includes shallow surface waves due to the atmosphere-surface coupling and is used for a preliminary inversion of the near-surface S-wave profile down to 50 m depth. In the case of Mars, we modeled the long-period signals generated by the pressure field resulting from turbulence-resolving Large-Eddy Simulations. For typical dust-devil-like vortices with pressure drops of a couple Pascals, the corresponding horizontal acceleration is of a few nm/s² for rocky subsurface models and reaches 10–20 nm/s² for weak regolith models. In both cases, this signal can be detected by the Very-Broad Band seismometers of the InSight/SEIS experiment up to a distance of a few hundred meters from the vortex, the amplitude of the signal decreasing as the inverse of the distance. Atmospheric vortices are thus expected to be detected at the InSight landing site; the analysis of their seismic and atmospheric signals could lead to additional constraints on the near-surface structure, more precisely on the ground compliance and possibly on the seismic velocities.     

Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI): Monolithic Interferometer Design and Test

The design and laboratory tests of the interferometers for the Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument which measures thermospheric wind and temperature for the NASA-sponsored Ionospheric Connection (ICON) Explorer mission are described. The monolithic interferometers use the Doppler Asymmetric Spatial Heterodyne (DASH) Spectroscopy technique for wind measurements and a multi-element photometer approach to measure thermospheric temperatures. The DASH technique and overall optical design of the MIGHTI instrument are described in an overview followed by details on the design, element fabrication, assembly, laboratory tests and thermal control of the interferometers that are the heart of MIGHTI.     

Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI): Instrument Design and Calibration

The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument was built for launch and operation on the NASA Ionospheric Connection Explorer (ICON) mission. The instrument was designed to measure thermospheric horizontal wind velocity profiles and thermospheric temperature in altitude regions between 90 km and 300 km, during day and night. For the wind measurements it uses two perpendicular fields of view pointed at the Earth’s limb, observing the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere. The MIGHTI requirements, the resulting instrument design and the calibration are described.     

Comparison of the transport codes HZETRN,HETC and FLUKA for galactic cosmic rays

The HZETRN deterministic radiation code is one of several tools developed to analyze the effects of harmful galactic cosmic rays (GCR) and solar particle events on mission planning and shielding for astronauts and instrumentation. This paper is a comparison study involving the two Monte Carlo transport codes, HETC–HEDS and FLUKA and the deterministic transport code, HZETRN. Each code is used to transport an ion from the 1977 solar minimum GCR spectrum impinging upon a 20 g/cm² aluminum slab followed by a 30 g/cm² water slab. This research is part of a systematic effort of verification and validation to quantify the accuracy of HZETRN and determine areas where it can be improved. Comparisons of dose and dose equivalent values at various depths in the water slab are presented in this report. This is followed by a comparison of the proton and forward, backward and total neutron flux at various depths in the water slab. Comparisons of the secondary light ion ²H, ³H, ³He and ⁴He fluxes are also examined.