航电系统并行检测过程与检测设备解耦方法

航电系统在使用或升级改造过程中进行可靠性检测是必不可少的。特别是在当前批量航电系统大量投入使用的背景下，迫切需要能高效、快速、准确地对系统进行可靠性检测。由于航电系统安全性要求高，内置检测软件受限，需要外置检测设备通过航电系统指定接口进行检测，检测过程也不允许出现任何泄露等行为。检测设备与具体航电系统耦合，检测过程与具体检测设备耦合，难以实现批量航电系统并行检测。为此，通过引入逻辑检测设备，给出了一种航电系统并行检测分层框架，解决检测设备与被测系统耦合的问题，同时也保证了检测的安全性。通过逻辑检测设备、检测跳转机和被测主机上检测行为的描述，给出了一种面向通用航电系统并行检测的检测设备协同机制，解决检测过程与检测设备耦合的问题，从而支持多个航电系统并行检测。最后，实现了一个通用航电系统并行检测系统，并通过实际应用和实验对比验证所提方法的有效性。     

DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

高校“思想道德修养与法律基础”课立体实践教学模式探究

高校"思想道德修养与法律基础"课以提高大学生思想境界、道德水平和法律常识为教学目标,但日常教学中重视理论讲授,实践教学不足。通过课堂、校园、社会、网络等途径,试图建立"思想道德修养与法律基础"课的立体实践教学模式,以期对改变实践教学薄弱的现状有所参考和借鉴。     

TS-InSAR analysis for monitoring ground deformation in Lanzhou New District,the loess Plateau of China,from 2017 to 2019

Large-scale land creation projects involving the cutting of mountains to infill gullies for construction have been carried out in Lanzhou New District (LZND). However, there is an urgent need for comprehensive and detailed research on the spatiotemporal evolution of ground deformation in LZND. Based on Sentinel-1A SAR data, combined with the urban geological background, the ground deformation in LZND from 2017 to 2019 was analysed. Two independent, multi-temporal techniques, persistent scatterers interferometry (PS-InSAR) and the small baseline subset (SBAS-InSAR), were used to calculate the deformation time series, and the results were cross-verified. The time series-monitoring results of the SBAS and PS calculations exhibited strong consistency in LZND and verified the high reliability of the experimental results. The results showed the whole surface of the LZND from March 2017 to October 2019 maintained stability, and the deformation rate was primarily in the range of ?10 to 10 mm/year. However, ground deformation in the Xicha area was evident. The maximum annual deformation rates monitored by SBAS-InSAR and PS-InSAR were ?52.48 mm/year and ?56.35 mm/year, respectively. The most typical deformation areas include the built-up area and the land creation area. The surface subsidence area was concentrated in the filling area. The ground deformation range of LZND kept expanding and accelerating from 2017 to 2019. Land creation, urban construction, geology and precipitation were the primary factors contributing to local severe ground deformation. The results of this study provide reference for the regional urban planning in LZND.     

Comparison of global morphologies of vertical ion convergence and sporadic E occurrence rate

This study employs the Horizontal Wind model 2014 to calculate the intensity of the Vertical ion convergence (VIC) to examine the role of neutral wind shear in the global distribution of the Es occurrence rate. The global S4 observations from the FORMOSAT-3/COSMIC GPS Occultation Experiment (GOX) are used to derive global information on the Es occurrence. Both the simulation and observation suggest that the Es highly occurs in the mid-latitude regions of the summer hemisphere.     

评估法兰结构螺栓松动的改进损伤指标研究

基于压电阻抗法的采用统计学参数作为损伤指标评估螺栓松动的方法有着广泛的应用，然而采用该方法的试验对象多数为实验室条件下的板等结构，并非真实结构。因此，针对真实的法兰结构，这些损伤指标是否适用、是否需要改进仍需进一步研究。通过实验，得出不同损伤指标与法兰结构螺栓松动之间的规律:螺栓松动的程度越大位置越近，均方根偏差（RMSD）、平均绝对百分比偏差（MAPD）、相关系数差（CCD）的值越大，而指标R_y/R_x因无显著规律不适合作为评估法兰结构螺栓松动的损伤指标。通过对比结果发现:结构差异对前3个损伤指标均有不同程度的影响，改进后的损伤指标均方根变化率（RMSCR）只与法兰结构螺栓松动的位置和程度有关，受结构差异影响小。因此，RMSCR具有重要实践意义:当任一压电片损坏时只需更换为同型号的压电片即可，无需更新损伤指标库。通过实验验证了上述结果的正确性与基于RMSCR的法兰结构螺栓松动检测方法的适用性。      

AHP中判断矩阵元素最优估计值的误差分析

在AHP模型中，请一组专家对某一属性进行评价，通过适当的数学处理方法，可得判断矩阵元素的最优估计值，并根据残差来确定所求估计值是否达到精度要求，若不符合精度要求则需返还给专家进行重新评估。这是AHP中构造判断矩阵的一种新方法。