V-BLAST BASED LDPC-CODED RELAY COOPERATION

An efficient LDPC-coded multi-relay cooperation architecture is proposed based on virtual vertical Bell Labs layered space-time （V-BLAST） processing for uplink communication, where minimum-mean-square-error （MMSE） and BP-based joint iterative decoding based on the introduced muhi-layer Tanner graph are effectively de- signed to detect and decode the corrupted received sequence at the destination. By introducing V-BLAST transmis- sion to the coded multi-relay cooperation, relays send their streams of symbols simultaneously, which increases the data rate and significantly reduces the transmission delay. The theoretical analysis and numerical results show that the new LDPC coded cooperation scheme outperforms the coded non-cooperation under the same code rate, and it also achieves a good trade-off among the performance, signal delay, and the encoding complexity associated with the number of relays. The performance gain can be credited to the proposed V-BLAST processing architecture and BP-based joint iterative decoding by the introduced multi-layer Tanner graph at a receiver-side.     

Libration point orbit rendezvous using PWPF modulated terminal sliding mode control

The near-range rendezvous problem of two libration point orbit spacecraft in the Earth–Moon system is studied using the terminal sliding mode control which enables a time-fixed process with the flight time prescribed a priori. The underlying dynamics are the full nonlinear equations of motion for a complete Solar System model. For practical purposes, two means of pulse-width pulse-frequency (PWPF) modulation are employed to realize the theoretical continuous control with a series of thrust pulses. Extensive simulations with major errors taken into account show that the sliding mode controller can successfully guide the chaser to a given staging node with the final position and velocity errors, on average, lower than 20 m and 1 mm/s, respectively. Compared with the glideslope guidance previously studied, the proposed approach outperforms the former by saving approximately 50–60% of total delta-v.     

星载电子设备元器件随机振动疲劳分析

星载电子设备通常要经历各种振动环境,在恶劣的随机振动环境中,设备中的元器件管脚及焊点容易出现疲劳问题。文章应用Miner疲劳损伤累积理论及三带宽技术,提出了一种实用有效的分析元器件管脚及焊点进行随机振动疲劳寿命的方法。     

Prediction of Group Delay Distribution Around Receiving Point Using Modified IRI Model and IGRF Model

The international reference ionosphere (IRI) model is generally accepted standard ionosphere model. It describes the ionosphere environment in quiet state and predicts the ionosphere parameters within a certain precision. In this paper, we have made a breakthrough in the application of the IRI model by modifying the model for regions of China. The main objectives of this modification are to construct the ionosphere parameters foF2 and M (3000) F2 by using the Chinese reference ionosphere (CRI) coefficients, appropriately increase hmE and hmF2 height, reduce the thickness of F layer, validate the parameter by the measured values, and solve the electron concentration distribution with quasi-parabolic segment (QPS). In this paper, 3D ray tracing algorithm is constructed based on the modified IRI model and international geomagnetic reference field (IGRF) model. In short-wave propagation, it can be used to predict the electromagnetic parameters of the receiving point, such as the receiving area, maximum useable frequency (MUF) and the distribution of the group delay etc., which can help to determine the suitability of the communication. As an example, we estimate the group delay distributions around Changchun in the detection from Qingdao to Changchun using the modified IRI model and IGRF model, and provide technical support for the short-wave communication between the two cities.     

APU飞机级控制系统设计研究

为充分发挥APU（辅助动力装置）在民用飞机上的作用,设计一个好的APU控制系统显得尤为重要。对APU飞机级控制系统的设计进行了相关研究,论述了APU控制板、APU控制器供电、燃油控制、应急停车、APU引气、起动／发电、风门控制和指示告警等控制子系统在设计时所要考虑的因素,并给出了相应的设计样例,然后从功能实现和电气原理的角度进行了详细地分析,可为APU飞机级控制系统的方案设计提供参考。     

贝叶斯网络在飞控系统可靠性评估中的应用

把一种基于贝叶斯网络的故障树分析法应用于飞控系统俯仰控制功能的可靠性评估中,突破传统故障树分析法的局限性——各部件独立、状态为二值,不但可以计算系统的可靠性指标,而且可以定量给出某个事件或某几个事件在系统可靠性中所占的地位,找出系统的薄弱环节。     

试飞数据处理方法——升力曲线和极曲线

介绍了一种试飞数据处理的方法,详细介绍了数据处理步骤。并以具体的试飞数据为例,根据提供的方法得出升力系数和阻力系数,进而可得到升力曲线和极曲线。对比了试飞数据和风洞试验的结果,两者基本相一致。在处理大量试飞数据的过程中,编写了相应的程序,提高了工作效率。     

Orbital rendezvous mission planning using mixed integer nonlinear programming

The rendezvous and docking mission is usually divided into several phases, and the mission planning is performed phase by phase. A new planning method using mixed integer nonlinear programming, which investigates single phase parameters and phase connecting parameters simultaneously, is proposed to improve the rendezvous mission’s overall performance. The design variables are composed of integers and continuous-valued numbers. The integer part consists of the parameters for station-keeping and sensor-switching, the number of maneuvers in each rendezvous phase and the number of repeating periods to start the rendezvous mission. The continuous part consists of the orbital transfer time and the station-keeping duration. The objective function is a combination of the propellant consumed, the sun angle which represents the power available, and the terminal precision of each rendezvous phase. The operational requirements for the spacecraft–ground communication, sun illumination and the sensor transition are considered. The simple genetic algorithm, which is a combination of the integer-coded and real-coded genetic algorithm, is chosen to obtain the optimal solution. A practical rendezvous mission planning problem is solved by the proposed method. The results show that the method proposed can solve the integral rendezvous mission planning problem effectively, and the solution obtained can satisfy the operational constraints and has a good overall performance.     

低电离层反射结构的日变化模型

本文提出了日出日落过渡期低电离层的运动斜曲面反射模型。结合白天和晚上的球面反射结构，形成了一个完整的低电离层反射结构日变化模型，提出了反射区的概念，从而使已有珠球面电离层反射的的天波场强计算公式改进为积分形式，更适于一般情况。文中计算了Ｍ台－青岛路径和Ｍ台－新乡路径－跳低频波场强幅度和相位的日变化值，并与实验结果进行了比较分析。