低Re对某小型涡扇发动机性能影响

低雷诺数问题是影响高空长航时无人驾驶飞机的动力装置性能的关键因素之一.定量分析了低雷诺数效应对某小型大涵道比涡扇发动机性能的影响.当雷诺数减小到一定程度后,各部件的性能将发生改变.在发动机整机环境下,增压级和低压涡轮的进口叶弦雷诺数相对更低,受飞行高度和速度的影响也更大.在发动机共同工作条件的作用下,各部件的匹配关系将发生变化,除部件效率的降低以外,部件流通能力的衰减也引起发动机性能的降低.涡轮前温度的限制将使发动机转子转速下降,低雷诺数效应加剧,从而导致发动机性能的进一步降低,推力迅速减小,但发动机涵道比的增加可以减小因部件性能衰退引起的耗油率上升的趋势.     

Application of hybrid regularization method for tomographic reconstruction of midlatitude ionospheric electron density

Reconstructing ionospheric electron density (IED) is an ill-posed inverse problem, with classical Tikhonov regularization tending to smooth IED structures. By contrast, total variation (TV) regularization effectively resists noise and preserves discontinuities of the IED. In this paper, we regularize the inverse problem by incorporating both Tikhonov and TV regularization. A specific formulation of the proposed method, called hybrid regularization, is introduced and investigated. The method is then tested using simulated data for the actual positions of the GPS satellites and ground receivers, and also applied to the analysis of real observation data under quiescent and disturbed ionospheric conditions. Experiments demonstrate the effectiveness, and illustrate the validity and reliability of the proposed method.     

飞机机翼故障的动态飞行包线估算方法

进行机翼故障情况下的飞行包线估算可为驾驶员正确操纵和包线保护控制提供必要的信息.考虑到飞机机翼故障的动力学特点,提出一种动态飞行包线估算方法.建立故障参数模型,应用最小二乘辨识算法进行气动参数辨识与故障诊断;基于参数辨识结果估算飞行包线;根据故障特点,分别对系统进行配平计算,在每个配平点建立飞行包线数据库,根据故障诊断结果实时调用包线库中的数据,形成当前时刻的飞行包线.     

基于智能化制造思想的测控-加工一体化技术的发展应用

智能化制造是集成了信息获取、处理、反馈和相应多项技术的系统工程.智能化制造通过对制造流程中的信息进行自动感应和自主反应,形成了制造过程中的神经网络.     

Drilling load modeling and validation based on the filling rate of auger flute in planetary sampling

Some type of penetration into a subsurface is required in planetary sampling. Drilling and coring, due to its efficient penetrating and cuttings removal characteristics, has been widely applied in previous sampling missions. Given the complicated mechanical properties of a planetary regolith, suitable drilling parameters should be matched with different drilling formations properly. Otherwise, drilling faults caused by overloads could easily happen. Hence, it is necessary to estab-lish a drilling load model, which is able to reveal the relationships among drilling loads, an auger's structural parameters, soil's mechanical properties, and relevant drilling parameters. A concept for the filling rate of auger flute (FRAF) is proposed to describe drilling conditions. If the FRAF index under one group of drilling parameters is less than 1, this means that the auger flute currently removes cuttings smoothly. Otherwise, the auger will be choked with compressed cuttings. In dril-ling operations, the drilling loads on the auger mainly come from the conveyance action, while the drilling loads on the drill bit primarily come from the cutting action. Experiments in one typical lunar regolith simulant indicate that the estimated drilling loads based on the FRAF coincide with the test results quite well. Based on this drilling load model, drilling parameters have been opti-mized.     

Glacier mapping based on rough set theory in the Manas River watershed

Precise glacier information is important for assessing climate change in remote mountain areas. To obtain more accurate glacier mapping, rough set theory, which can deal with vague and uncertainty information, was introduced to obtain optimal knowledge rules for glacier mapping. Optical images, thermal infrared band data, texture information and morphometric parameters were combined to build a decision table used in our proposed rough set theory method. After discretizing the real value attributes, decision rules were calculated through the decision rule generation algorithm for glacier mapping. A decision classifier based on the generated rules classified the multispectral image into glacier and non-glacier areas. The result of maximum likelihood classification (MLC) was used to compare with the result of the classification based on the rough set theory. Confusion matrix and visual interpretation were used to evaluate the overall accuracy of the results of the two methods. The accuracies of the rough set method and maximum likelihood classification were compared, yielding overall accuracies of 94.15% and 93.88%, respectively. It showed the area difference based on rough set was smaller by comparing the glacier areas of the rough set method and MLC with visual interpreter, respectively. The high accuracy for glacier mapping and the small area difference for glacier based on rough set theory demonstrated that this method was effective and promising for glacier mapping.     

唐长红飞机设计专家

():您两次被任命为总设计师,是否感受到了压力?您是如何面对这些压力的?唐长红:当年接新"飞豹"的时候,有种"初生牛犊"的感觉,而且,当时做过"飞豹"飞机的老同志还有很大一批在岗,所以感觉能减轻一些压力;接国家重点项目的时候,我感觉压力很大.毕竟,这个项目台阶更高、国人寄托的期望更大,而且是亟需的装备.特别是我们的工业基础还有待提高,所以压力还是很大的.     

紧固件柔度系数研究

在飞行器结构中普遍采用紧固件进行结构连接,紧固件的柔度系数是分析紧固件连接细节部位疲劳强度的重要参数.通常,确定紧固件柔度系数的方法多基于试验,但是这需要做大量的试验,耗费巨大.因此希望通过理论方法对紧固件柔度系数进行研究,获得新的计算紧固件柔度系数的方法,以达到减少试验和节省时间的目的.运用材料力学和弹性理论知识,推...     

焊接方法对5A06铝合金厚板焊缝接头性能的影响

分别采用搅拌摩擦焊(FSW)和熔化极氩弧焊(MIG)对20mm厚的5A06铝合金进行了焊接试验,对两种焊接方式的焊缝接头进行了机械性能测试、显微组织的观察以及表面残余应力的检测。结果表明,搅拌摩擦焊缝接头的抗拉强度比熔化极氩弧焊缝接头的高,搅拌摩擦焊缝接头往往断裂于前进侧的熔合过渡区,熔化极氩弧焊缝接头断裂于热影响区;相比熔化极氩弧焊,搅拌摩擦焊接头晶粒明显细化,焊缝中Mg、Mn等合金元素烧损明显减少,焊缝表面的残余应力水平也较低。