航天器子结构模态综合法研究现状及进展

现代航天器结构十分复杂,无论采用计算方法还是试验方法进行分析都是十分艰难的。在这样的研制背景下,子结构模态综合法应运而生。系统地回顾和总结了三大类子结构模态综合法的发展历程和相应的改进,介绍了该方法在航天工程上的应用。采用该方法可极大地提高航天器型号的研制效率。提出了子结构模态综合法面临的问题。     

高速平板诱导轮的结构设计与分析

诱导轮是液体火箭发动机（LPRE）中重要的组成部分,它能有效地提高主泵的抽吸性能。首先介绍了LPRE诱导轮的几种典型结构型式,然后阐述了LPRE诱导轮的基本概念和设计原理,进一步推荐和分析了高速平板诱导轮几个重要结构参数的设计准则,最后按照设计方法设计了用于某液体火箭发动机的一台高速诱导轮,CFD计算表明它具有较好的扬程性能和抗汽蚀特性。     

基于DMA的USB设备驱动及其动态链接库开发

用D river Stud io开发工具进行USB设备的驱动程序开发,并在VC6.0环境下编写USB设备的动态链接库,从而实现DMA传输。介绍W indows2000下的WDM驱动程序的体系结构,着重介绍基于DMA传输的USB设备驱动程序及其动态链接库的开发。     

ESA developments in life support technology: achievements and future priorities.

Following an enthusiastic start in 1985, ESA's life support technology development programme was re-assessed in the mid- to late-1990s to reflect the strong reduction in European manned space ambitions which occurred at that time. Further development was essentially restricted to activities that could constitute ISS upgrades or enhancements, or support ISS utilisation/operations, together with a single, limited, activity (MELISSA) aimed at bioregenerative life support, in the continuing hope that there might be "life after Station". The paper describes the current status of these activities and summarises the main priorities for future development that were identified at the April 1999 Workshop on Advanced Life Support.     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.     

民用飞机复合材料结构制造工艺变化的等效性验证

高性能复合材料已经大量应用于民用运输飞机结构,并以飞机主制造商协同供应商的方式进行复合材料飞机结构的制造。介绍了航空器适航审定对复合材料结构制造的适航要求,引出了复合材料结构制造工艺变化的等效性验证方法。目前,复合材料结构制造工艺变化的等效性验证是通过所制造复合材料物理的、化学和基本力学的性能试验,并对试验结果进行统计分析来实现的。最后提供了等效性验证的接受准则。所述内容,对国内民用飞机复合材料结构在不同供应商处制造以及制造过程中工艺变化如何满足航空器适航审定要求提供借鉴;对其它行业复合材料结构制造的质量控制也有借鉴意义。     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

航天飞行器中舷窗温度场及换热的研究：外部界面处于第三类非线性边界条件

本文采用控制容积法,光线踪迹法结合谱带模型,研究航天飞机返回大气层时舷窗硅玻璃的非稳态复合换热。文章给出了界面S_2处于第三类非线性边界条件下,舷窗硅玻璃内部的温度场和进入机舱内部的热流密度。计算结果表明,如不考虑硅玻璃内部的辐射作用,对温度场影响不太大,但对进入机舱内的热流密度将会产生很大的误差。     

用高速纹影摄影技术观测自由面微物质的喷射

本文介绍了适于爆轰实验研究的透射式高速纹影仪。该设备具有较高的测试灵敏度。应用它观测了铅和钢样品自由面的微物质喷射现象,取得了好的结果。