一种基于FPGA的超高速FFT处理器设计

通过采用合并字节的预整序单元、全并行的基4运算单元、首级存储单元外置的移位延时整序结构和逐级 扩充字长的定点算法,用FPGA实现了一个超高速的基4全并行流水线FFT处理器;在66MHz时钟频率下,处理速度可 达到256K点／ms。     

考虑应力-强度干涉的发动机管路设计方法

在静强度设计的基础上,根据应力-强度理论,对高压补燃液氧煤油发动机总装管路设计在考虑材料机械性能的不均匀和工作压力脉动的条件下,对动态可靠性进行了数学建模,提出了采用动态安全系数的校正方法。通过试验验证,这种方法能够保证发动机工作可靠性设计要求,为发动机管路设计提供了一种新的方法,也可以推广到其它结构件的设计当中。     

多飞行器测控技术的研究

提出了一种基于DBF和DMF-CDMA技术的多飞行器测控系统。首先描述了系统的工作原理，然后对DBF给出了全面和详细的计算机仿真，包括圆面阵DBF阵因子方向图仿真和DBF对多飞行器的搜索与跟踪仿真。最后对DMF-CDMA给出了实验结果。实验的硬软件巳达到实用水平。这些说明本文提出的多飞行器测控方案是可行的。     

航天器子结构模态综合法研究现状及进展

现代航天器结构十分复杂,无论采用计算方法还是试验方法进行分析都是十分艰难的。在这样的研制背景下,子结构模态综合法应运而生。系统地回顾和总结了三大类子结构模态综合法的发展历程和相应的改进,介绍了该方法在航天工程上的应用。采用该方法可极大地提高航天器型号的研制效率。提出了子结构模态综合法面临的问题。     

高速平板诱导轮的结构设计与分析

诱导轮是液体火箭发动机（LPRE）中重要的组成部分,它能有效地提高主泵的抽吸性能。首先介绍了LPRE诱导轮的几种典型结构型式,然后阐述了LPRE诱导轮的基本概念和设计原理,进一步推荐和分析了高速平板诱导轮几个重要结构参数的设计准则,最后按照设计方法设计了用于某液体火箭发动机的一台高速诱导轮,CFD计算表明它具有较好的扬程性能和抗汽蚀特性。     

基于DMA的USB设备驱动及其动态链接库开发

用D river Stud io开发工具进行USB设备的驱动程序开发,并在VC6.0环境下编写USB设备的动态链接库,从而实现DMA传输。介绍W indows2000下的WDM驱动程序的体系结构,着重介绍基于DMA传输的USB设备驱动程序及其动态链接库的开发。     

星载相控阵GNSS-R测高系统设计与实验

星载GNSS-R测高系统采用多波束相控阵天线和干涉互相关处理方式,接收北斗导航卫星和GPS导航卫星发射的L波段导航直射信号与海面反射信号,进行海面高度探测。详细介绍GNSS-R测高系统设计与实现、集成和外场试验等,外场试验不仅验证了相控阵GNSS-R测高系统功能,更重要的是验证了核心软件算法的正确性。GNSS-R测高系统适用于中尺度海洋现象的观测,可在时间和空间尺度上扩展雷达高度计的观测能力,并与之相互补充,有利于对复杂海面的中尺度结构进行较高时间分辨率的观测。GNSS-R测高仪为星载高精度海面高度探测提供了新型载荷。     

Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning

 There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is es-sential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and riveting. Therefore, this article presents a new multi-objective optimization method based on ant colony optimization (ACO). Multi-objective optimization model of automatic drilling and riveting sequence planning is built by expressing the efficiency and accuracy of riveting as functions of the points’ coordinates. In order to search the sequences efficiently and improve the quality of the sequences, a new local pheromone updating rule is applied when the ants search sequences. Pareto dominance is incorporated into the proposed ACO to find out the non-dominated sequences. This method is tested on a hyperbolicity panel model of ARJ21 and the result shows its feasibility and superiority compared with particle swarm optimization (PSO) and ge-netic algorithm (GA).     

ESA developments in life support technology: achievements and future priorities.

Following an enthusiastic start in 1985, ESA's life support technology development programme was re-assessed in the mid- to late-1990s to reflect the strong reduction in European manned space ambitions which occurred at that time. Further development was essentially restricted to activities that could constitute ISS upgrades or enhancements, or support ISS utilisation/operations, together with a single, limited, activity (MELISSA) aimed at bioregenerative life support, in the continuing hope that there might be "life after Station". The paper describes the current status of these activities and summarises the main priorities for future development that were identified at the April 1999 Workshop on Advanced Life Support.     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.