Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

Ground Compatibility Tests for Gravity Measurement of SELENE: Accuracies of Two- and Four-Way Doppler and Range Measurements

The Japanese lunar mission Selenological and Engineering Explorer (SELENE) was launched in September 2007 and continued its mission until June 2009, when the main orbiter impacted with the surface of the Moon. SELENE consisted of three satellites: Main, Rstar, and Vstar. Rstar’s tasks were to forward up-link signals from the Usuada Deep Space Center (UDSC) to Main, and to down-link returning signals from Main to UDSC. We refer to this tracking sub-system as a four-way Doppler measurement. In contrast, conventional tracking systems between Rstar and UDSC as well as between Main and ground stations are referred to as two-way Doppler and range measurements. Using Main and Rstar, we successfully observed the gravity field over the farside of the Moon. Because four-way Doppler measurements via a relay sub-satellite were a fundamental experiment in space for Japanese space agencies, compatibility of radiometric instruments onboard Main and Rstar to UDSC were carefully examined at the UDSC using components manufactured for flight models. These tests not only proved the feasibility of the four-way Doppler measurements but also provided biases and variations of the four-way Doppler and two-way Doppler and range measurements that were later taken into account during the processing of tracking data and the analysis of the lunar global gravity field.     

Overwintering in the Antarctica as an analog for long term manned spaceflight.

As a part of Polar Psychological Project planned by SCAR group on Antarctic-Space-Related-Human-Factors-Research, a series of psychological tests were conducted on the Japanese wintering-over personnel. The main purpose of the research was to study the behavioral characteristics, such as depression, insomnia, anxiety, and hostility, which might develop during the course of wintering-over period, and it involves a detailed study of the individuals and interpersonal relationship.     

Radio-scintillation observations of interplanetary disturbances

Recent developments in the studies of interplanetary disturbances by scintillation (IPS) techniques are briefly reviewed. The turbulent post-shock region of an interplanetary disturbance produces transient enhancements in the scintillation level and the flow speed in many cases. An empirical method to determine three-dimensional angular distribution of propagation speed of the disturbance on the basis of IPS measurements of post-shock flow speeds is applied to 17 events which took place in 1978–1981. Among them, four representative examples including two events which were associated with disappearing solar filaments are described in detail. Several disturbances had oblate configurations; the latitudinal extent is smaller than the longitudinal extent. On an average, the angular distribution of propagation speed at 1 AU heliocentric distance is quasi-isotropic over a longitudinal range of 100° centered at the normal of relevant solar phenomenon. The net excess mass and energy in an interplanetary disturbance associated with a disappearing solar filament can be comparable to those of an interplanetary disturbance associated with a large solar flare.     

A space station experiment on large antenna assembly and measurement

The large assembly antenna in space can meet future requirements of both high frequency and large aperture. This paper proposes an experiment on assembling a large antenna at the Space Station, and discusses a realizable procedure of the experiment. The objective of this experiment is that a large antenna of a 10-m diameter is assembled in space and at the same time problems occurring in the assembling process are clarified by conducting the following experiments: assembly of test articles by manipulators, measurement of both mechanical and electrical performance of the assembled antenna, test of the pointing control system, and operational test. In the operational test, the weather radar development test and the large aperture microwave radiometer development test are conducted. Furthermore, the problem areas and items of further study are discussed in this paper.     

Time variations of cosmic-ray helium isotopes with BESS-Polar I

The Balloon-borne Experiment with a Superconducting Spectrometer (BESS) is configured with a solenoidal superconducting magnet and a suite of precision particle detectors, including time-of-flight hodoscopes based on plastic scintillators, a silica-aerogel Cherenkov detector, and a high resolution tracking system with a central jet-type drift chamber. The charges of incident particles are determined from energy losses in the scintillators. Their magnetic rigidities (momentum/charge) are measured by reconstructing each particle trajectory in the magnetic field, and their velocities are obtained by using the time-of-flight system. Together, these measurements can accurately identify helium isotopes among the incoming cosmic-ray helium nuclei up to energies in the GeV per nucleon region. The BESS-Polar I instrument flew for 8.5 days over Antarctica from December 13th to December 21st, 2004. Its long-duration flight and large geometric acceptance allow the time variations of isotopic fluxes to be studied for the first time. The time variations of helium isotope fluxes are presented here for rigidities from 1.2 to 2.5 GV and results are compared to previously reported proton data and neutron monitor data.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

ETS-II Experiments Part III: Weather Radar System

The weather radar system used in conjunction with Earth-satellite propagation experiments for quantifying rainfall rate in a unit volume, determined by the beamwidth and the pulselength, is described. Firstly, methods for deriving rainfall rate per unit volume are stated in detail with special emphasis on calibration to determine unknown parameters associated with propagation losses in waveguides and the atmosphere. The calibration method is somewhat different from a conventional one but is useful for routine observation. Secondly, in addition to a simple explanation of the hardware of this radar system, the data modes, developed for measuring rainfall rate along the propagation path and radar reflectivity factor in the horizontal and vertical cross sections around the station are described. These data modes are effectively combined by the operational scanning modes for routine observation of propagation experiments, while each data mode can also be operated independently. Examples obtained by each data mode are also given.