Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

Avoid online radiation risk: Theoretical simulation of chromosome breaks in cells exposed to heavy ions

In this study, we report an easy and quick method on simulating chromosome breaks in cells exposed to heavy charged particles. The theoretical value of chromosome break was calculated, and validated comparison with experimental value by using premature chromosome condensation technique. A good consistency was found between theoretical and experimental value. This suggested that higher relative biological effectiveness of heavy ions was closely correlated with its physical characteristics. Also, a safe approach on predicting chromosome breaks in cells exposed to heavy ions at off-line environment can be considered. Furthermore, three key factors influencing the theoretical simulation was investigated and discussed.     

消费者创新性对手机银行使用意愿的影响研究

探索消费者创新性对手机银行使用意愿的影响,基于技术接受模型,构建了消费者创新性影响手机银行使用意愿的假设模型,依据假设模型开展了问卷调查。通过AMOS17.0软件对调查数据和假设模型进行了结构方程模型检验。研究结果表明,消费者创新性对手机银行使用意向具有显著影响,其影响机制是通过消费者对手机银行易用性和有用性的感知影响消费者对手机银行的使用态度,进而影响手机银行使用意向。在此基础上对商业银行发展手机银行提出了实践建议。     

基于磁共振线宽的Xe核自旋横向弛豫时间测量方法

随着核磁共振陀螺技术的发展,高精度核磁共振陀螺对原子气室性能提出了更高要求.原子气室内Xe核自旋的横向弛豫时间(T2)是衡量原子气室性能的重要参数之一,T2的常用测量方法为自由感应衰减法(Free Induction Decay,FID).当T2较短时,由于自旋进动信号易受外界干扰,FID方法难以对T2进行精确测量.根据磁共振线宽理论以及自旋进动信号检测技术,针对T2较短的原子气室,提出了基于磁共振线宽的Xe核自旋横向弛豫时间测量方法,构建了测试装置,对Xe核自旋进行了测试.测试结果表明,该测量方法能够有效获得Xe核自旋的横向弛豫时间,克服了FID方法对T2较短的原子气室难以测量的局限性,为检验核磁共振陀螺中原子气室的性能提供了有效测试手段.     

离心叶轮全三维反问题方法设计误差稳定性研究

用流线曲率全三维反问题方法和引入滑移因子模型的准三维流线曲率反问题方法设计了叶片数不同的和增压比不同的小型高速离心叶轮.用商用计算流体力学(CFD)求解器估算了这些叶轮的性能.对比了这两种反问题方法的设计误差稳定性,考察了分流叶片对设计误差的影响.结果表明,流线曲率全三维反问题方法能够根据叶片负荷对叶片设计做出恰当调整.较准三维反问题方法,流线曲率全三维反问题方法所设计叶轮的增压比普遍偏高.随叶片负荷增加,较准三维反问题方法,流线曲率全三维反问题方法的设计误差变化较小,即其设计误差稳定性明显较好.分流叶片对准三维反问题方法设计结果的影响明显较小.      

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

正反顺序加载下安装边螺栓预紧力分散度的数值模拟与试验验证

在航空发动机机匣安装边装配过程中,不同位置螺栓之间会产生弹性交互作用,不同加载方案会使装配后的螺栓预紧力存在一定的分散度。针对这一问题,建立了3层带止口机匣安装边3维接触有限元模型,研究不同加载方案下螺栓预紧力的施加方法。基于有限元模型数值模拟了3层机匣安装边分别在顺序加载方案、交叉加载方案和正反顺序2轮加载方案下螺栓预紧力的分散度。搭建了相应的试验装置,分别对3种加载方案的预紧力分散度进行试验验证。结果表明：采用正反顺序2轮加载后的螺栓预紧力分散度最小,在3层止口机匣安装边上采用正反顺序2轮加载方案后的螺栓预紧力分散度较小,在有限元仿真中螺栓预紧力分散度为2.43%,在试验中螺栓预紧力分散度为4.98%。采用此方案加载后,止口机匣安装边能达到更好的密封效果和较好的刚度对称性。