光纤消偏器及其应用

介绍了用于光纤陀螺的Lyot型消偏器的基本原理，并给出相应的计算公式。分析结果表明Lyot消偏器的最佳方案为两段光纤长度之比等于1：2。据此设计的退偏光纤陀螺性能具有较好的一致性。     

面向对象开发方法的单元测试研究

简要介绍了面向对象开发方法的单元测试面临的特殊性问题并进行分析，探讨了面向对象单元测试采取的策略和测试用例的设计方法，最后对面向对象单元测试的充分性问题进行了讨论。     

大力神—4改进型固体助推器爆炸原因分析及启示

介绍了大力神-4改进型固体助推器的研制情况、结构特点及主要性能,阐述了地面试验失败的原因及改进措施,并联系卡斯托Ⅱ研制中出现的类似失败情况,就发动机内流场气流的相互作用及药柱变形对发动机工作的影响进行了扼要分析,并提出了值得重视的几点启示。     

某型火箭弹射座椅座高无法调节的故障浅析

本文从弹射座椅无法升降和直流发动机消耗电流过大的现象入手,结合座椅升降系统的工作原理对故障进行分析,最终准确定位故障.对从事飞机座椅调试人员有一定的指导意义.     

靶弹突防中的有源干扰信号监测系统实现与使用研究

靶场反导试验中,反导武器系统面临弹道靶弹突防过程中施放的各种有源干扰,为了给反导武器系统抗干扰性能评估提供数据支撑,需要对伴随有源干扰信号进行监测.通过研究弹道靶弹突防中伴随有源干扰机的工作过程与特点,提出伴随有源干扰信号监测系统应具备的特点与使用要求,分析伴随有源干扰信号监测系统与常规监测系统的差异,设计了伴随有源干...     

固体发动机喷管延伸锥展开前级间分离的热环境分析

通过FLUENT流场计算软件,采用RNGK k-ε湍流模型,针对带有延伸喷管的多级固体发动机级间热分离的热环境进行了数值分析。研究表明,延伸喷管尾流受到连接筒、前封头、延伸段的阻碍后,其流动特征变化显著,尤其在一级前封头的影响下形成回流,并在喷管内形成激波。计算得到的热环境参数,对发动机的热防护设计具有一定的参考价值。     

自主火星探测高集成离子与中性粒子分析仪

小型化、高集成化是深空探测载荷发展的主要趋势。在我国自主火星探测计划中,设计了一种高集成化的火星离子与中性粒子分析仪。采用从传感器到电子学进行最大限度共用的设计思路,在一台仪器中实现对离子和能量中性原子进行能量、方向和成分的探测,大大降低了仪器对卫星平台的资源需求。仪器采取静电分析进行离子的方向和能量测量、采取飞行时间方法进行离子成分的测量。中性原子采用电离板电离成带电离子,后端的能量测量和成分测量与离子相同。鉴定件样机已经完成了初步的测试定标,结果表明其满足设计要求。     

Heading control strategy assessment for coaxial compound helicopters

The coaxial compound helicopter has two possible strategies for heading control: collective differential and rudder deflection. A flight dynamics model is developed to assess the effect of different heading control strategies. This includes the trim characteristics, steady flight performance,controllability, and manoeuvrability. The trim study demonstrates that heading control strategies are less influential on trim results, and the steady flight performance is also not significantly affected by the heading control strategy adopted. The controllability analysis shows although heading bandwidth and phase delay results at various speeds with different heading control strategies are all satisfied, the control derivative of the collective differential decreases as speed increases, and its heading aggressive agility is degraded into Level 3 in high-speed flight. In addition, using collective differential would lead to severe heading-rolling coupling as forward speed increases. On the contrary, the control derivative and aggressive agility of the rudder deflection is improved with forward speed, and there is no evidence of heading-rolling coupling. Finally, the transient turn MissionTask-Element(MTE) is utilized to investigate the heading manoeuvre characteristics in different heading control strategies, which indicates that the collective differential would add the amplitude of control input and the power consumption during this MTE.     

超宽带变频系统中的本振产生技术研究

本振源是超宽带变频系统中的核心部件，本文以超宽带上变频系统为例，介绍变频系统中本振信号的产生技术。本文所设计的超宽带变频系统，经过三次上变频，可将(0.8~2.8)GHz 的低频信号变换至（0.5~40）GHz。变频过程中需要一系列点频本振和一组宽带本振，基于PLL+DFS 的方法产生点频本振，基于DDS+DFS 的方式产生宽带本振。     

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built. Based on these models, the quantitative expressions of the road feel, sensitivity, and operation stability of the steering are derived. Then, according to the features of multi-constrained optimization of multi-objective function, a multi-island genetic algorithm （MIGA） is designed. Taking the road feel and the sensi- tivity of the steering as optimization objectives and the operation stability of the steering as a constraint, the system parameters are optimized. The simulation results show that the system optimized with MIGA can improve the steering road feel, and guarantee the operation stability and steering sensibility.