A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

MTS协调加载系统建立试验载荷谱软件的设计和应用

针对MTS协调加载系统在建立试验载荷谱中存在的功能缺陷，采用多线程和动态建立索引的方法，开发了MTS协调加载系统快速、准确地建立试验载荷谱软件。介绍了软件的设计思路以及建立载荷数据模块及配置载荷情况模块及加载顺序模块等功能模块和接口的设计。解决了该系统在实际应用中存在的局限性问题，完善了MTS系统功能。最后通过试验验证了软件的实用性。     

无人机自由编队飞行的补偿模糊神经网络控制

为了克服当前提出的无人机编队飞行的不足，提出一种新的无人机编队飞行概念——自由编队飞行，制定了相关的避让规则，用补偿模糊神经网络进行训练，实现自由编队飞行的补偿模糊神经网络控制。仿真显示，编队飞行的飞机能按照规则自主改变航路进行避让，表明了该方法的有效性。     

航天火工装置推力测量的干扰分析

航天火工装置种类很多,性能各异。文章仅对广泛使用的弹射器和解锁器类火工装置的推力测量系统进行论述,分析测量过程中的干扰环节,说明不同干扰类型对测量结果的影响。并提出测试改进建议。     

CA6145i型车床噪声检测与降噪处理

通过对新机型CA6145i卧式车床进行噪声攻关试验,得出此型号机床噪声声压级超标,且主轴箱中伴有不规则的杂声。应用频谱分析法找到噪声源,采取相应措施降低或消除噪声,为车床的批量投产奠定基础。     

锌渣的固化处理及浸出毒性试验研究

采用药剂稳定化、水泥固化以及二者结合等方法对锌渣进行了处理研究。结果表明重金属螯合剂的药剂稳定化和水泥固化相结合的方法处理锌渣,其重金属含量可以低于固体废物毒性浸出标准的限值,能有效控制对周围环境的污染。所以,采用药剂稳定化和水泥固化结合的方法处理锌渣是完全可行的。     

转动旋翼模型动柔度的试验研究

介绍测定转动旋翼模型动柔度的试验方案、试验程序，综述以作者自行设计的旋翼模型进行试验所得到的结果及其与理论计算结果的比较。结果表明，试验方案与方法是可行的，理论计算公式是正确的。