基于加权全变差最小化的中子外部CT重建算法

针对中子外部CT检测需求，提出了基于加权方向全变差（WDTV）最小化的中子外部CT重建算法。首先，利用平行束数据对称性原理将正弦图中旋转中心另一侧缺失的投影数据进行补充；其次，采用传统FBP算法进行了外部CT扫描模式下的CT重建。为了抑制传统FBP、SART算法重建图像中径向边缘伪影，采用WDTV算法计算沿径向和周向方向的局部方向差分并作加权和。另外，在重建模型的WDTV项中引入2个权重参数以控制径向边缘和切向边缘的不同响应强度。最后，采用所提算法研究了重建图像质量与投影数据量的关系。计算机仿真和真实冷中子实验表明:基于WDTV最小化的中子外部CT重建算法能够有效抑制径向边缘伪影，获得高质量重建图像。      

Fringe fitting and group delay determination for geodetic VLBI observations of DOR tones

Extracting the group and phase delays of interferometric observations produced in the Very Long Baseline Interferometry (VLBI) measurement concept requires a special fringe fitting and delay search algorithm for the recorded bandwidth. While fringe fitting is in use routinely for several megahertz wide channels in geodetic and astrometric VLBI with quasar observations, fringe fitting for artificial tones of very small bandwidth of artificial signals for Differential One-way Ranging (DOR) requires a different way of handling. In a project called Observing the Chang’E-3 Lander with VLBI (OCEL), the DOR tones emitted by the Chang’E-3 lander were observed in a standard geodetic VLBI mode with 8 or 4?MHz wide channels to maintain compatibility with the corresponding quasar observations. For these observations, we modified the existing fringe fitting program of the Haystack Observatory Processing Software (HOPS), fourfit, to properly handle narrow band DOR tones. The main motivations are that through this modification, the data of quasars and artificial radio sources can be processed in the existing geodetic analysis pipeline, and that the algorithm can be used for similar projects as well. In this paper, we describe the algorithm and show that the new algorithm produces much more reliable group delay results than using the standard fourfit algorithm. This is done by a simulation test and in particular by processing of real observations. It is shown that in many cases, systematic deviations of several nanoseconds, which are seen with the standard fourfit algorithm, can be avoided. The ultimate benefit of the new procedure is demonstrated by reducing the errors in delay triangle closures by at least a factor of 3, which, in the OCEL case, is from ～300 to ～100?ps.     

放宽静稳定度飞机时间延迟稳定边界

针对飞机初步设计阶段其放宽静稳定度（RSS）与电传飞控系统时间延迟边界之间的定量关系求解问题，以战斗机纵向短周期方程为基础，分析了飞控系统中的时间延迟因素，描述了放宽静稳定度与方程参数间的关系。并以等效输入延迟的形式构建了含飞控系统时间延迟的闭环系统特征方程，通过根轨迹趋势理论和数值计算方法确定了放宽静稳定度与飞控系统时间延迟边界的定量数值关系，同时探讨了舵效与动导的参数不确定性对所求时间延迟边界的影响。本文方法对飞机初步设计阶段飞控系统时间延迟指标和可放宽静稳定度边界的确定具有一定的工程实践意义。     

网络流行新构式"AB人"的路径化分析

语言是人类赖以生存的交流工具,语词的可生成性以及开放性特征是日常话语能产性的根本.在最近的网络流行语中,"打工人"类词语的流行推动了日常话语中一系列"AB人"词语的出现,"AB人"类词语大多并非新造词语,但是其意义已经发生改变.通过对该类词语语音特征、语法特征和语义特征的探究,可以理清"AB人"构式生成的机制,探究该构式内部发生的词汇压制和构式压制现象,以及明确该构式生成的合理性.同时,通过对"AB人"生成原因的探讨,可以较好把握社会性网络语言生成的总方向,明晰网络流行词语的一般生成机制.     

广义轨道根数空间的轨道机动可达性

在由动量矩矢量和偏心率矢量定义的广义轨道根数度量空间内,研究了在初始轨道的任意点施加幅值固定的单脉冲后卫星的可达区域,包括脉冲施加的位置任意、方向固定和位置固定、方向任意2种情况,给出了广义轨道根数空间中轨道机动的可达性判据.通过比较脉冲作用前后的广义轨道根数,评估了单脉冲对广义轨道根数的影响,并且利用数值仿真分析了脉冲作用位置、方向与广义轨道根数空间中度量的关系.最后,在广义轨道根数空间中给出了轨道到轨道的机动策略,验证了广义轨道根数的可行性.     

Application of novel force control strategies to enhance robotic abrasive belt grinding quality of aero-engine blades

Robotic belt grinding has emerged as a finishing process in recent years for machining components with high surface finish and flexibility.The surface machining consistency, however,is difficult to be guaranteed in such a process.To overcome this problem, a method of hybrid force-position control combined with PI/PD control is proposed to be applied in robotic abrasive belt grinding of complex geometries.Voltage signals are firstly obtained and transformed to force information with signal conditioning methods.Secondly, zero drift and gravity compensation algorithms are presented to calibrate the F/T transducer which is installed on the robot end-effector.Next, a force control strategy combining hybrid force-position control with PI/PD control is introduced to be employed in robotic abrasive belt grinding operations where the force control law is applied to the Z direction of the tool frame and the positon control law is used in the X direction of the tool frame.Then, the accuracy of the F/T transducer and the robotic force control system is analyzed to ensure the stability and reliability of force control in the robotic grinding process.Finally, two typical cases on robotic belt grinding of a test workpiece and an aero-engine blade are conducted to validate the practicality and effectiveness of the force control technology proposed.     

评估法兰结构螺栓松动的改进损伤指标研究

基于压电阻抗法的采用统计学参数作为损伤指标评估螺栓松动的方法有着广泛的应用，然而采用该方法的试验对象多数为实验室条件下的板等结构，并非真实结构。因此，针对真实的法兰结构，这些损伤指标是否适用、是否需要改进仍需进一步研究。通过实验，得出不同损伤指标与法兰结构螺栓松动之间的规律:螺栓松动的程度越大位置越近，均方根偏差（RMSD）、平均绝对百分比偏差（MAPD）、相关系数差（CCD）的值越大，而指标R_y/R_x因无显著规律不适合作为评估法兰结构螺栓松动的损伤指标。通过对比结果发现:结构差异对前3个损伤指标均有不同程度的影响，改进后的损伤指标均方根变化率（RMSCR）只与法兰结构螺栓松动的位置和程度有关，受结构差异影响小。因此，RMSCR具有重要实践意义:当任一压电片损坏时只需更换为同型号的压电片即可，无需更新损伤指标库。通过实验验证了上述结果的正确性与基于RMSCR的法兰结构螺栓松动检测方法的适用性。      

试论企业变化管理体系的要素与构建

探讨了变化与企业变化管理的内涵,论述了企业变化管理体系的构成要素与构建原则,提出了企业变化管理体系的模型——＂C＂模型,阐述了企业变化管理体系构建的步骤及方法。     

基于熵权法开展读者满意度测评的实证研究——长沙商贸旅游职业技术学院数字图书馆为例

基于熵权法测评高职院校数字图书馆的服务水平,用数字来量化图书馆读者满意度,找出高职院校数字图书馆服务的薄弱环节,明确服务改善的具体内容。通过构建高职院校数字图书馆读者满意度评价指标体系和基于熵值法权重确定的模糊综合测评模型,对长沙商贸旅游职业技术学院数字图书馆读者满意度进行测评,并提出相应的对策。     

类X-38升力体运载器气动布局概念设计

开展升力体运载器的气动布局概念设计研究,利用二次曲线横截面及模线设计方法,提出一种类X-38升力体运载器气动外形,进行机体的优化和控制舵的匹配设计,研究飞行器的气动特性和操纵效率问题。研究表明,该方案可以获得较高的配平升阻比及配平攻角,有较高的容积效率和机动控制效率,可以作为未来航天运载器的潜在可行方案。