FL—23风洞洞壁对跨声速颤振的干扰影响

本文提供了在FL-23风洞中进行的试验研究结果。试验采用动力相似的四种不同尺寸的60°三角机翼平板半模型。结果表明:洞壁干扰提高了跨声速颤振临界速压,当模型展长对试验段宽度的比值Lm/B为0.687、0.600和0.512时,使颤振临界速度的压缩性修正系数分别减小3.8％、2.5％和1.4％。改变开孔率的试验定性验证了上述结果的合理性。     

进气温度畸变对某发动机稳定性影响的研究

本文采用有效的畸变传递模型，就进气温度畸变对某发动机稳定性和性能的影响进行了较深入的数值研究．详细地分析了温度畸变对发动机稳定性和性能的影响，探讨了温度畸变在发动机系统中的传递和分布情况。结果表明：对于发动机进口空间温度畸变，发动机稳定裕度损失更多地取决于畸变强度而非周向范围：向对于与时间相关的温度畸变，发动机进口温升率比周向范围的影响更为显著。     

飞机平尾偏角引动量的自动检测

根据飞机纵向操纵系统工作原理和纵向平飞操纵原理，推导了平衡速度与平尾偏角的关系式，分析了操纵杆力、平衡速度、平尾偏角的相互关系及平衡速度的调整原理。结合平尾偏角检测现状，提出了一种利用机械臂自动检测飞机平尾偏角的方法，成功研制了平尾偏角自动检测仪，并用于平衡速度的调整。反复检测表明：该检测仪可取代目前广泛使用的人工检测方法，提高了飞机维修保障能力，具有较大的推广前景。     

壳聚糖钯催化剂催化合成对硝基苯甲醚的研究

以壳聚糖为载体,负载金属钯作为催化剂,研究了其对合成对硝基苯甲醚反应的催化活性。研究表明,该催化剂具有较高的催化活性,可高转化率、高产率地合成对硝基苯甲醚;通过简单的过滤、溶剂洗涤回收催化剂,并能多次重复使用。     

旋流器内流场的研究

叙述了分别采用五孔探针、热线和激光三种流场测量方法测量旋流器模型内的流场分布情况,并得出基本一致的实验结果,从而为旋流发生器的设计提供理论依据。     

基于连续覆盖特性分析的星座设计

研究了需要对地面目标进行连续覆盖的星座的设计问题．首先推导了对覆盖性能有重要影响的星间覆盖间隔时间和轨道面覆盖间隔时间的计算公式，通过算例针对不同配置的星座进行了计算，使用工程仿真软件STK验证了分析结果．通过理论分析、算例计算以及工程仿真为该类型星座设计提供了理论指导。     

电子束表面造型对液冷冷板散热性能影响研究

为了获得电子束表面造型对液冷冷板散热性能的影响规律,对带有柱状表面造型的液冷冷板进行数值模拟。结果表明,当冷却液通道中存在柱状表面造型时,可有效提高冷板的散热性能,其中造型高度对冷板的散热性能影响最大,造型流向间距的影响其次,造型直径的影响最小;当柱状造型直径1mm、高度6mm且相邻造型的流向间距为4mm时,冷却液与模拟发热芯片的温差为46.08℃,该冷板的散热性能与空白试样对比可提升23.23%。之后根据模拟结果,制备了具有不同表面造型特征的液冷冷板试样,散热性能测试结果表明,通道内制备柱状造型可提高冷板散热性能达13%以上;但当柱状造型高度4mm,且造型数量较少时,改变柱状造型特征对提升冷板散热性能的影响较小。     

一种整体式天然气压缩机气阀故障诊断技术研究CSCD

整体式天然气压缩机在石油化工领域广泛应用,压缩机的正常工作对安全生产具有重要意义。为了有效诊断整体式压缩机气阀部件的故障,采用了Daubechies小波基函数对ZTY470型整体式天然气压缩机气阀振动信号的分解重构原理,详细介绍了以振动信号的能量为故障特征的故障诊断过程。对气阀阀片断裂和弹簧断裂的故障振动信号进行了小波包分析,并与正常工作时的信号进行了对比。实验表明该方法能准确的进行故障诊断和故障定位,证明了对整体式天然气压缩机气阀故障诊断的有效性。     

Mo M-PO/SBR Algorithm Based on Collaborative Platform and Mixed Model

For electromagnetic scattering of 3-D complex electrically large conducting targets,a new hybrid algorithm,Mo M-PO/SBR algorithm,is presented to realize the interaction of information between method of moment(Mo M)and physical optics(PO)/shooting and bouncing ray(SBR). In the algorithm,the COC file that based on the Huygens equivalent principle is introduced,and the conversion interface between the equivalent surface and the target is established. And then,the multi-task flow model presented in this paper is adopted to conduct CPU/graphics processing unit(GPU)tests of the algorithm under three modes,i.e.,MPI/Open MP,MPI/compute unified device architecture(CUDA) and multi-task programming model(MTPM). Numerical results are presented and compared with reference solutions in order to illustrate the accuracy and the efficiency of the proposed algorithm.     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.