星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

三维非结构网格DSMC并行算法及应用研究

基于PC-CLUSTER机群并行体系结构与消息传递库MPI并行环境,研究了三维非结构网格DSMC并行算法。提出一类基于结构背景网格上的非结构网格动态分区策略,保证各子区域的分子数量大致相等,实现计算进程间的动态负载平衡。利用MPI库函数构造了两类符合DSMC并行原理的通讯法:单步通讯法与多步通讯法。采用单控制多数据流(SPMD)以及Master/Slave并行模式,设计了三维非结构网格DSMC整体并行算法。给出了跟踪模拟分子在四面体网格间迁移运动的详细计算过程。最后对全尺寸航天飞机高超声速绕流进行了并行模拟,验证并行算法的有效性。     

深度节流补燃循环发动机系统稳定性研究

补燃循环发动机深度节流过程中,系统参数大范围变化,低工况时喷注器压降和供应系统节流元件压降较低,容易出现推进剂供应系统与热力组件耦合的不稳定问题。针对10∶1深度节流富氧补燃循环发动机,通过Nyquist稳定性分析方法,对发动机全工况范围内泵后供应系统和燃气系统耦合稳定性进行仿真研究。结果表明:富氧补燃循环发动机燃料供应路与燃气路形成的闭环系统在低工况时,稳定裕度较低,改善燃气发生器喷雾燃烧效果以缩短时滞、增加燃气停留时间、在靠近燃气发生器位置增加供应系统压降能提高系统稳定裕度。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

CBERS-1卫星CCD相机零级图像处理研究

CCD相机是CBERS - 1卫星上的主要有效载荷之一。利用其接收的可见光和近红外谱段的图像 ,可以在国民经济的各个生产部门 ,诸如国土资源调查、农业、林业、地矿、水利、环境、生态等方面得到广泛应用。但是由于探元和光学系统成像的物理机制和各种干扰等因素影响 ,地面接收到的数据必须经过处理才能应用。文章介绍的内容就是将这种图像数据经图像预处理 ,得到零级图像 ;经过相应的辐射校正 ,得到一级图像 ;经过几何校正 ,得到二级图像产品 ,提供给其它部门加以应用     

国外几种新型微化学推力器

介绍了国外几种以微机电系统 (MEMS)技术为基础的液体和固体微化学推力器。这些新型微化学推力器具有MEMS技术微型化、低成本和批量生产的优点 ,并考虑了体积限制和高度集成等空间限制 ,能产生 10 -6～ 10N·s的推力脉冲 ,可用于微型卫星和纳米卫星的姿态调整、变轨和定向的精确控制。同时阐述了这几种微推力器结构特点和制造工艺 ,并与其他类型的推进器进行了比较     

基于3D Zernike矩的三维地形匹配算法及性能分析

提出了一种基于面特征的三维地形匹配算法。在算法中,与三维地形具有一一对应关系的3D Zernike矩用来描述参考高程图(DEM)和恢复地形高程图(REM),三维地形匹配转化为基于3D Zernike矩的特征向量匹配。匹配按先粗后精两步进行,在粗匹配中,匹配窗口滑动步长设定为5个象素,采用较低阶数的3D Zernike矩。在精匹配中,只对3个最优粗匹配位置的邻近区域进行精匹配,匹配窗口滑动步长为1个象素,采用较高阶数的3DZernike矩。两块地形的相似度以它们的3D Zernike矩间Camberra距离来度量,距离越小越相似,反之亦然。本算法属于特征面匹配,相对于基于特征点和特征线的地形匹配,理论和实验证明该算法具有更高的匹配概率、匹配精度和更强的抗噪声能力。