Transient response investigation of gimballed tiltrotors during engage and disengage operations

Ｕｎｉｑｕｅａｎｄｏｆｔｅｎｈａｚａｒｄｏｕｓｃｏｎｄｉｔｉｏｎｓａｒｅｅｎｃｏｕｎｔｅｒｅｄｗｈｅｎｒｏｔｏｒｃｒａｆｔａｒｅｏｐｅｒａｔｅｄｆｒｏｍｓｈｉｐｂａｓｅｄｐｌａｔｆｏｒｍｓ．Ｏｎｅｏｆｔｈｅｍｏｒｅｔｒｏｕｂｌｅｓｏｍｅｒｏｔｏｒｃｒ...     

铝锂合金的铸锭冶金（Ⅱ）

介绍了俄罗斯铝锂合金铸锭熔炼和铸造方法的发展和改进，评述了铝锂合金熔铸特点，熔体氧化，防护添加剂，熔剂和氩气防护，氧、碳、氮和氢等非金属夹杂，铸造裂纹（冷裂和热裂）敏感性，结晶状态，不均匀组织等方面的研究结果。     

Asymptotic Reproducibility in Nonlinear Systems and Attitude Control of Gyrostat

A control law is presented for asymptotic function reproducibility in a class of nonlinear-systems such that the output of the system asympotically tends to a given function. The controller consists of a prefilter and a servocompensator. Based on this result, a nonlinear feedback control law for the attitude control of a satellite containing symmetric rotors, in a circular orbit, is derived. In the closed-loop system, given trajectories of pitch, yaw, and roll angles are asymptotically followed, and set point control of attitude is accomplished. Digital simulation results are presented to show the capability of the nonlinear controller.     

Ambiguity Functions for Quadratic Phase-Coded Pulse Trains

The matched filter ambiguity function is presented for a burst waveform composed of repeated subbursts, each one of which consists of N pulses in which the phase is varied quadratically from pulse to pulse. The resulting ambiguity function exhibits small residual ambiguities along the delay axis separated by the reciprocal of the pulse repetition frequency (PRF). A cross-ambiguity function is derived which reduces these ambiguities to zero amplitude. A third cross-ambiguity function is presented for a receiver matched to a generalized Hamming weighted repeated quadratic burst. The location in the delay/Doppler plane of the waveform ambiguities for these waveforms is compared with that of an uncoded pulse burst.     

Design Rules for Adaptive Arrays

The concepts of "equivalent linear arrays" and "minimum effective spacing" can be used to simplify the analysis of planar adaptive arrays. The resulting design rules permit the rapid determination of array configurations without the need for computer modeling.     

Advanced Aircraft Electric System

The topics, advanced aircraft electric system and all-electric airplane, inspire a broad range of concepts from the evolutionary to the revolutionary. The revolutionary developments are exciting to the research and development community but find little encouragement or acceptance from airframe developers whose objective is to build an advanced technology airplane using only-off-the-shelf, proven equipment. Their anthem rings "We know how bad the ___________ is, but we have learned to live with it. We have only your vision of how good an advanced system will be and fear to chance it. "However, the cost of living with these known systems combined with the escalating cost of fuel and the military need to address advanced mission capability demands more than a patch called improved reliability and maintainability. The time is at hand to demonstrate an evolutionary approach to achieve a revolutionary improvement. This paper describes an advanced electric system, the life cycle cost improvement anticipated, and the evolutionary means to implementation.     

Electromechanical Actuation Technology for the All-Electric Aircraft

Electromechanical actuation is a critical element that must be developed and verified to make the all-electric aircraft a viable concept. For several years the Flight Control Division of the Air Force Wright Aeronautical Laboratories has sponsored activities to demonstrate the credibility of electromechanical actuation systems (EMAS) for primary flight control actuation functions. The foundation for these EMAS activities and several electromechanical actuation development programs are described here. One involves the design, fabrication, and laboratory test of a rotary, hingeline electromechanical actuator. Another involves the development and flight test demonstration of a linear electromechanical actuator for controlling an aileron of a C-141 aircraft. A third involves the design and development of a linear electromechanical actuator for missiles having severe performance, temperature, and volumetric requirements. In addition, a brief summary of the results from two aircraft actuation trade studies compare the baseline (conventional) hydraulic flight control system with an all-electric airplane concept including quantitative comparisons of weight, reliability and maintainability, and life cycle costs.     

Extensions of the Discrete-Average Models for Converter Power Stages

An improved power converter model is developed by combining the average and discrete modeling techniques. The parameter determination of the proposed discrete-average model is shown to be dependent on the type of duty cycle control law and the nature of the error processor used in the feedback loop. Furthermore, the paper pinpoints deficiencies of the conventional loop gain measurement technique which is widely used in industries.     

State Estimation and Divergence Analysis

A growing memory discrete dynamic model for performing temporal extrapolations along a predetermined path in a random field is presented. This dynamic model is used to drive a linear system that is itself driven by discrete white noise. The coupled system is used to derive a state estimation scheme that recursively processes noisy measurements of the system. In addition, using the aforementioned dynamic model as a reference (truth) model, the authors develop a covariance analysis to measure the estimation errors that occur when the dynamics along the path through the field are modeled as a Markov linear model and state estimation is performed using discrete Kalman filtering. The performance evaluation of an inertial navigation system influenced by the Earth's gravity field aboard a maneuvering ship is provided as a specific illustrative example.     

Detection Loss of the Sample Matrix Inversion Technique

The sample matrix inversion (SMI) technique is used for Doppler and/or array processing. Previous analysis of the technique has been in terms of signal-to-interference plus noise ratio (SINR). For Gaussian statistics, this performance measure gives the same loss values as does a probability of detection analysis for linear-time invariant systems. It is often somewhat less valid for nonlinear or time variant systems. As SMI is a nonlinear technique, a probability of detection analysis has been performed. It is shown that the detection loss is larger than that computed by the SINR measure. It is also shown that though the loss predicted by the SINR measure only depends upon the number of measurements used to estimate the covariance matrix, the detection loss depends upon the false alarm probability and the number of adaptable elements in addition to the number of measurements.