Curiosity’s Mars Hand Lens Imager (MAHLI) Investigation

The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ～5?km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a?camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ～2.1?cm to infinity. At the minimum working distance, image pixel scale is ～14?μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI’s resolution is comparable at ～30?μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.     

跨声轴流压气机转子尾迹的总压平均方法

对一台跨声轴流压气机转子的尾迹流场进行了数值模拟研究和总压实验测量,结合理论分析方法,研究了面积平均和质量平均这两种常用的总压平均方法在跨声轴流压气机转子尾迹测量中的联系与差异.结果表明:在靠近转子尾缘的测量截面,由于转子尾迹流场中存在总压高而轴向速度低的区域,导致面积平均总压大于质量平均总压;而随着尾迹与主流在下游逐渐掺混均匀,面积平均总压又小于质量平均总压.两种总压平均方法的这一规律性关联可以在研究压气机转子尾迹特征尤其是进行数值计算和实验测量结果对比分析时提供一些有价值的参考.      

Influence of residual stresses on failure pressure of cylindrical pressure vessels

The utilization of pressure vessels in aerospace applications is manifold.In this work,fnite element analysis（FEA）has been carried out using ANSYS software package with 2D axisymmetric model to access the failure pressure of cylindrical pressure vessel made of ASTM A36 carbon steel having weld-induced residual stresses.To fnd out the effect of residual stresses on failure pressure,frst an elasto-plastic analysis is performed to fnd out the failure pressure of pressure vessel not having residual stresses.Then a thermo-mechanical fnite element analysis is performed to assess the residual stresses developed in the pressure vessel during welding.Finally one more elasto-plastic analysis is performed to assess the effect of residual stresses on failure pressure of the pressure vessel having residual stresses.This analysis indicates reduction in the failure pressure due to unfavorable residual stresses.     

Dust in and Around the Heliosphere and Astrospheres

Space Science Reviews - The ESA Swarm mission, launched on 22 November 2013, consists of three spacecraft each equipped with a Micro Advanced Stellar Compass ( $\mu $ ASC) from the Technical...     

Mass balances for a biological life support system simulation model.

Design decisions to aid the development of future space-based biological life support systems (BLSS) can be made with simulation models. Here we develop the biochemical stoichiometry for 1) protein, carbohydrate, fat, fiber, and lignin production in the edible and inedible parts of plants; 2) food consumption and production of organic solids in urine, feces, and wash water by the humans; and 3) operation of the waste processor. Flux values for all components are derived for a steady-state system with wheat as the sole food source. The large-scale dynamics of a materially-closed (BLSS) computer model is described in a companion paper. An extension of this methodology can explore multi-food systems and more complex biochemical dynamics while maintaining whole-system closure as a focus.     

The STEREO/IMPACT Magnetic Field Experiment

The magnetometer on the STEREO mission is one of the sensors in the IMPACT instrument suite. A single, triaxial, wide-range, low-power and noise fluxgate magnetometer of traditional design—and reduced volume configuration—has been implemented in each spacecraft. The sensors are mounted on the IMPACT telescoping booms at a distance of ～3 m from the spacecraft body to reduce magnetic contamination. The electronics have been designed as an integral part of the IMPACT Data Processing Unit, sharing a common power converter and data/command interfaces. The instruments cover the range ±65,536 nT in two intervals controlled by the IDPU (±512 nT; ±65,536 nT). This very wide range allows operation of the instruments during all phases of the mission, including Earth flybys as well as during spacecraft test and integration in the geomagnetic field. The primary STEREO/IMPACT science objectives addressed by the magnetometer are the study of the interplanetary magnetic field (IMF), its response to solar activity, and its relationship to solar wind structure. The instruments were powered on and the booms deployed on November 1, 2006, seven days after the spacecraft were launched, and are operating nominally. A magnetic cleanliness program was implemented to minimize variable spacecraft fields and to ensure that the static spacecraft-generated magnetic field does not interfere with the measurements.     

Substorm-associated injections of energetic ions observed by GEOS-1 and ATS-6 in and near synchronous altitude

Energetic ion measurements of GEOS-1 and ATS-6 are analysed for the period of geomagnetic activity following the arrival of a solar wind shock at 0027 UT on July 29, 1977. GEOS crossed the magnetopause at 6.9 R _E and 0027 UT (1312 LT). Although the difference in local time to ATS at 6.6 R _E is only 2 h ATS seems to remain well inside the magnetopause. During the second orbital pass on this day GEOS crossed the geostationary orbit at the onset time of a major substorm developing at 1120 UT. At this time the local time difference of GEOS and ATS was 12 h. The considerably different energy dispersions are discussed. An azimuthal anisotropy of approximately 20% observed in the GEOS data is interpreted to be the result of a particle density gradient.NOAA-SEL, Boulder, Colo., U.S.A.     

Optimum Design of RC Snubbers for Switching Regulators

The optimum design of an RC snubber to suppress the surge voltage across the transistor in a switching regulator with a two-winding reactor is presented. Analyzing the surge voltage by means of high-frequency equivalent circuits, we obtain the third-order characteristic equation. This third-order equation is first analyzed by the aid of the root locus method. As a result, the region where the surge voltage can be suppressed is described in the R-C plane. Then considering the snubber loss, the optimum resistance and capacitance can be obtained. Second, the precise design procedure of RC snubbers is discussed by normalization and numerical calculations. This procedure is summarized in easy-to-use nomographs.     

A Normalized Model for the Half-Bridge Series Resonant Converter

Closed-form steady-state equations are derived for the halfbridge series resonant converter with a rectified (dc) load. Normalized curves for various currents and voltages are then plotted as a function of the circuit parameters. Experimental results based on a 10-kHz converter are presented for comparison with the calculations.     

Understanding Interplanetary Coronal Mass Ejection Signatures

While interplanetary coronal mass ejections (ICMEs) are understood to be the heliospheric counterparts of CMEs, with signatures undeniably linked to the CME process, the variability of these signatures and questions about mapping to observed CME features raise issues that remain on the cutting edge of ICME research. These issues are discussed in the context of traditional understanding, and recent results using innovative analysis techniques are reviewed.