Life cycle testing of a sealed 24-V, 42-Ah nickel-cadmium aircraftbattery

Extensive research has been conducted in the design and manufacture of very long life sealed maintenance free nickel-cadmium aircraft batteries. This study presents data on a 100% depth of discharge (DOD) life test performed on a nominal capacity 42-Ah battery. The purpose of this study is to validate design concepts, determine the life characteristics of the newly designed sealed Ni-Cd batteries, and develop baseline information on failure rates and mechanisms. The data from this experiment can be used to compare depth of discharge versus battery life with similar tests such as the lower DOD experiments performed on spacecraft batteries. This information is important in the ongoing development of long life batteries and in developing failure models for life prediction     

Monte Carlo track structure studies of energy deposition and calculation of initial DSB and RBE.

Estimation of exposure due to environmental and other sources of radiations of high-LET and low-LET is of interest in radiobiology and radiation protection for risk assessment. To account for the differences in effectiveness of different types of radiations various parameters have been used. However, the relative inadequacy of the commonly used parameters, including dose, fluence, linear energy transfer, lineal energy, specific energy and quality factor, has been made manifest by the biological importance of the microscopic track structure and primary modes of interaction. Monte Carlo track structure simulations have been used to calculate the frequency of energy deposition by radiations of high- and low-LET in target sizes similar to DNA and higher order genomic structure. Tracks of monoenergetic heavy ions and electrons were constructed by following the molecular interaction-by-interaction histories of the particles down to 10 eV. Subsequently, geometrical models of these assumed biological targets were randomly exposed to the radiation tracks and the frequency of energy depositions obtained were normalized to unit dose in unit density liquid water (l0(3) kg m-3). From these data and a more sophisticated model of the DNA, absolute yields of both single- and double-strand breaks expressed in number of breaks per dalton per Gray were obtained and compared with the measured yields. The relative biological effectiveness (RBE) for energy depositions in cylindrical targets has been calculated using 100 keV electrons as the reference radiation assuming the electron track-ends contribution is similar to that in 250 kV X-ray or Co60 gamma-ray irradiations.     

Calibration techniques for magnetometers implementing on-board de-spinning algorithms

The Fluxgate Magnetometer experiments on-board the European Space Agency’s four spacecraft Cluster Mission have the capability to store sampled magnetic field vectors in the instrument memory, either as a full resolution ‘event capture’ or as spin-resolution vectors transformed into a non-spinning co-ordinate system (de-spun). The latter capability has ensured a dataset is available which extends the partial orbital coverage achieved during nominal operations in the first years of operation. The on-board de-spin is achieved using a Walsh function with Haar coefficients and allows for up to 27 h additional data per non-coverage interval. A number of commissioning orbits were used to verify the accuracy of data collected by the de-spin mode, whereby individual spacecraft were operated separately in a number of standard normal sampling and de-spin mode combinations. Up to the present time, this data has not been available to the Cluster community. We present results here comparing the performance of the on-board de-spin algorithm versus the normal sampling modes over a number of boundary layer crossings, describe the techniques used for calibration and timeline recovery, and outline the context in which the data may be usable in future studies.     

Design for a bioreactor with sunlight supply and operations systems for use in the space environment.

An experiment was carried out to determine the characteristics of an operations system that can support fast cultivation of algae at high densities in the weightlessness of space. The experiment was conducted in glass bioreactor tanks, in which light was supplied by radiator rods connected to optical fiber cables. The illumination areas of the tanks were 2600 cm2, 6000 cm2, and 9200 cm2 per liter of solution. The characteristics of O2-CO2 gas exchange, concentration and separation of chlorella in the growth medium, dialysis of ionic salts in the growth medium, etc. were examined. Chloralla ellipsoidea was used in the experiment, yielding the following results: (1) By increasing the ratio of illumination area to volume, growth rates of up to approximately 0.6 g/L h could be obtained in a highly concentrated solution (one that contains 20 g/L or more of algae). (2) The most suitable proportions of carbon dioxide and oxygen gases for growing algae quickly at high concentrations were found to be 10% CO2 and 10% O2 (by volume). (3) There was a high optimum concentration for fast cultivation, and the data obtained resembled the theoretical curve postulated by P. Behrens et al. (4) It was possible to exchange carbon dioxide and oxygen using gas-permeable membrane modules. (5) It was possible to separate the chlorella from the growth medium and recycle the medium.     

Sunlight supply and gas exchange systems in the microalgal bioreactor.

The bioreactor with sunlight supply system and gas exchange systems presented here has proved feasible in ground tests and shows much promise for space use as a CELSS device. Our chief conclusions concerning the specification of total system needed for a life support system for a man in a space station are the following. (1) Sunlight supply system: compactness and low electrical consumption. (2) Bioreactor system: high density and growth rate of chlorella. (3) Gas exchange system: enough for O2 production and CO2 assimilation.     

Design and analysis of new p(n,k) polyphase pulse compression codes

P(n,k) codes as a new class of polyphase pulse compression codes are introduced and analyzed in detail. The P(n,k) codes are conceptually derived by step approximation of the phase function of a nonlinear-frequency modulated (NLFM) Chirp signal with a favorable energy density spectrum. The significant advantages of P(n,k) codes over conventional polyphase codes are lower autocorrelation sidelobes and an improved tolerance of low Doppler shifts and precompression bandwidth limitations. The primary disadvantage of the P(n,k) codes over conventional codes is a loss in range resolution. The uniform P(n,k) codes are especially attractive for radars employing digital signal professing because their favorable correlation properties also remain when quantization effects are taken into account     

Stimulated electromagnetic emissions by high-frequency electromagnetic pumping of the ionospheric plasma

A high frequency electromagnetic pump wave transmitted into the ionospheric plasma from the ground can stimulate electromagnetic radiation with frequencies around that of the ionospherically reflected pump wave. The numerous spectral features of these stimulated electromagnetic emissions (SEE) and their temporal evolution on a wide range of time scales are reviewed and related theoretical, numerical, and simulation results are discussed. On long (thermal) time scales the SEE constitutes a self-organization of the ionospheric plasma which depends on the interaction of nonlinear processes in a hierarchy of time scales in response to the electromagnetic pumping. Particularly, the appearance of the rich SEE spectrum is associated with the slow self-structuring of the plasma density into a spectrum of magnetic field-aligned density striations. The dependence of the SEE on electron gyroharmonic effects and the presence of density striations suggests that the existence of a magnetic field in the plasma is important for plasma turbulence to dissipate into non-thermal electromagnetic radiation during the long time quasi-stationary state of the turbulence evolution.     

A program to measure new energetic particle nuclear interaction cross sections.

The Transport Collaboration, consisting of researchers from institutions in France, Germany, Italy and the USA, has established a program to make new measurements of nuclear interaction cross sections for heavy projectiles (Z > or = 2) in targets of liquid H2, He and heavier materials. Such cross sections directly affect calculations of galactic and solar cosmic ray transport through matter and are needed for accurate radiation hazard assessment. To date, the collaboration has obtained data using the LBL Bevalac HISS facility with 20 projectiles from 4He to 58Ni in the energy range 393-910 MeV/nucleon. Preliminary results from the analysis of these data are presented here and compared to other measurements and to cross section prediction formulae.     

Security intrusion process: an empirical model

This paper describes a security model developed from empirical data collected from a realistic intrusion experiment in which a number of undergraduate students were invited to attack a distributed computer system. Relevant data, with respect to their intrusion activities, were recorded continuously. We have worked out a hypothesis on typical attacker behavior based on experiences from this and other similar experiments. The hypothesis suggests that the attacking process can be split into three phases: the learning phase, the standard attack phase and the innovative attack phase. The probability for successful attacks during the learning phase is expected to be small and, if a breach occurs, it is rather a result of pure luck than deliberate action. During the standard attack phase, this probability is considerably higher, whereas it decreases again in the innovative attack phase. The collected data indicates that the breaches during the standard attack phase are statistically equivalent. Furthermore, the times between breaches seem to be exponentially distributed, which means that traditional methods for reliability modelling of component failures may be applicable