Formation of amino acid precursors in cometary ice environments by cosmic radiation.

Cometary ices are believed to contain water, carbon monoxide, methane and ammonia, and are possible sites for the formation and preservation of organic compounds relating to the origin of life. Cosmic rays, together with ultraviolet light, are among the most effective energy sources for the formation of organic compounds in space. In order to study the possibility of the formation of amino acids in comets or their precursory bodies (interstellar dust grains), several types of ice mixtures made in a cryostat at 10 K ("simulated cometary ices") were irradiated with high energy protons. After irradiation, the volatile products were analyzed with a quadrupole mass spectrometer, while temperature of the cryostat was raised to room temperature. The non-volatile products remaining in the cryostat at room temperature were collected with water. They were acid-hydrolyzed, and analyzed by ion-exchange chromatography. When an ice mixture of carbon monoxide (or methane), ammonia and water was irradiated, some hydrocarbons were formed, and amino acids such as glycine and alanine were detected in the hydrolyzate. These results suggest the possible formation of "amino acid precursors" (compounds yielding amino acids after hydrolysis) in interstellar dust grains by cosmic radiation. We previously reported that amino acid precursors were formed when simulated primitive planetary atmospheres were irradiated with cosmic ray particles. It will be of great interest to compare the amount of bioorganic compounds that were formed in the primitive earth and that brought by comets to the earth.     

Coronal Observations of CMEs

CMEs have been observed for over 30 years with a wide variety of instruments. It is now possible to derive detailed and quantitative information on CME morphology, velocity, acceleration and mass. Flares associated with CMEs are observed in X-rays, and several different radio signatures are also seen. Optical and UV spectra of CMEs both on the disk and at the limb provide velocities along the line of sight and diagnostics for temperature, density and composition. From the vast quantity of data we attempt to synthesize the current state of knowledge of the properties of CMEs, along with some specific observed characteristics that illuminate the physical processes occurring during CME eruption. These include the common three-part structures of CMEs, which is generally attributed to compressed material at the leading edge, a low-density magnetic bubble and dense prominence gas. Signatures of shock waves are seen, but the location of these shocks relative to the other structures and the occurrence rate at the heights where Solar Energetic Particles are produced remains controversial. The relationships among CMEs, Moreton waves, EIT waves, and EUV dimming are also cloudy. The close connection between CMEs and flares suggests that magnetic reconnection plays an important role in CME eruption and evolution. We discuss the evidence for reconnection in current sheets from white-light, X-ray, radio and UV observations. Finally, we summarize the requirements for future instrumentation that might answer the outstanding questions and the opportunities that new space-based and ground-based observatories will provide in the future.     

Ulysses observations of a coronal origin particle event at 32° south heliographic latitutde

A remarkable streaming beam-like particle event of 60 keV-5 MeV ions and of 38–315 keV electrons has been reported previously. This event has been associated with the passage of a Coronal Mass Ejection (CME) over the Ulysses spacecraft on June 9–13, 1993. At this time, the spacecraft was located at 4.6 AU from the sun and at an heliolatitude of 32° south. It was proposed (Armstrong et al., 1994) that the particle injection source could have been of coronal origin. In this study, we analyse the solar activity during this period. We identify a region of solar radio noise storms in the corona and in particular, a flare on June 7 that presents all the required characteristics to produce the hot plasma beam observed in the interplanetary medium.     

Rocket Exhaust Scattering Effects on Incident Microwave Propagation Characteristics

This paper considers the effect of the rocket exhaust turbulence and scattering within the surrounding medium upon the propagation characteristics of incident electromagnetic waves. The exhaust is represented by a cylindrical plasma beam, diffusing through the surrounding medium. The equations of propagation of EM waves are derived for both TE and TM modes. By using a quasi-linear perturbation technique the exhaust is further separated into an inner homogeneous cylindrical plasma beam, and an outer conical inhomogeneous turbulent region. The isotropic change in the temperature of the outer region and its effects on the fluctuations in the density of electrons, collision frequency, and plasma index of refraction are analyzed in detail. It is found that the exhaust turbulence and scattering effects produce linear fluctuations in the E and H fields computed from the exhaust inner region effect. The equations of this paper can be used in the prediction of the radar cross sections and the attenuation of microwaves by rocket exhaust plumes.     

Comments on `Detector relative efficiencies in the presence ofLaplace noise' by M.I. Dadi and J.R. Marks II

In the above-titled paper (see ibid., vol.AES-23, p.568-82, July 1987) M.I. Dadi and J.R. Marks II studied the relative efficiencies of the Neyman-Pearson optimal detector with respect to the linear and sign detectors, for the detection of a constant signal in additive Laplace noise. By applying the central limit theorem, they derived expressions for three types of asymptotic relative efficiencies (AREs). However, as noted in the above paper, the Gaussian approximation to the sign detector fails to yield the correct asymptotic efficiency. The commenter derives the correct ARE of the optimal detector with respect to the sign detector for the Laplace noise     

Adaptive control and stabilization of elastic spacecraft

This work treats the question of large angle rotational maneuver and stabilization of an elastic spacecraft (spacecraft-beam-tip body configuration). It is assumed that the parameters of the system are completely unknown. An adaptive control law is derived for the rotational maneuver of the spacecraft. Using the adaptive controller, asymptotically decoupled control of the pitch angle of the space vehicle is accomplished, however this maneuver causes elastic deformation of the beam connecting the orbiter and tip body. For the stabilization of the zero dynamics (flexible dynamics), a stabilizer is designed using elastic mode velocity feedback. In the closed-loop system including the adaptive controller and the stabilizer, reference pitch angle trajectory tracking and vibration suppression are accomplished. Simulation results are presented to show the maneuver capability of the control system     

Homologous flare–CME events and their metric type II radio burst association

Active region NOAA 11158 produced many flares during its disk passage. At least two of these flares can be considered as homologous: the C6.6 flare at 06:51 UT and C9.4 flare at 12:41 UT on February 14, 2011. Both flares occurred at the same location (eastern edge of the active region) and have a similar decay of the GOES soft X-ray light curve. The associated coronal mass ejections (CMEs) were slow (334 and 337 km/s) and of similar apparent widths (43° and 44°), but they had different radio signatures. The second event was associated with a metric type II burst while the first one was not. The COR1 coronagraphs on board the STEREO spacecraft clearly show that the second CME propagated into the preceding CME that occurred 50 min before. These observations suggest that CME–CME interaction might be a key process in exciting the type II radio emission by slow CMEs.     

Influence of climatic operational conditions of a helicopter on physico-mechanical properties of composite materials

The results of numerical and experimental study of physico-mechanical properties of composite materials are proposed and variations in rigidity characteristics of the hub working part of the hingeless type within the entire range of helicopter operational temperatures are evaluated.     

The asymmetrical growth of otoliths in fish is affected by hypergravity.

Size and asymmetry (size difference between the left and the right side) of inner ear otoliths of larval cichlid fish were determined after a long-term stay at moderate hypergravity conditions (3g; centrifuge), in the course of which the animals completed their ontogenetic development from hatch to freely swimming. Both the normal morphogenetic development as well as the timely onset and gain of performance of the swimming behaviour was not impaired by the experimental conditions. However, both utricular and saccular otoliths (lapilli and sagittae, respectively) were significantly smaller after hyper-g exposure as compared to parallely raised 1g control specimens. The asymmetry of sagittae was significantly increased in the experimental animals, whereas the respective asymmetry con-cerning lapilli was pronouncedly decreased in comparison to the 1g controls. These findings suggest, that the growth and the development of bilateral asymmetry of otoliths is guided by the environmental gravity vector.