目标电磁散射特性的混合法研究

从Ｓｔｒａｔｔｏｎ－Ｃｈｕ公式出发，利用阻抗边界条件，得出阻抗边界条件积分方程，将目标表面分成不同的区域，有些区域用高频解析方法求出其表面电流，有些区域利用矩量法解阻抗边界条件积分方程得表面电流。本文以橄榄体（包括介质涂敷情形）为例，计算其电磁散射特性，混合法计算结果与实测结果或其他方法的计算结果比较吻合。     

连续自由流电泳微重力下分离模式蛋白质的研究

以连续自由流电泳的区带电泳模式分离血红蛋白和细胞色素C，比较了不同缓冲液甘油浓度下的分离效果，确定了最终装载在神舟4号飞船上A3—2型电泳仪的电泳分离条件，通过地面和空间实验，初步探讨了微重力对连续自由流电泳分离的影响，并对电泳的分离产物做了多种检测．     

FPGA设计中的亚稳态问题及其预防方法研究

由于在复杂FPGA（Field Programmable Gate Array,现场可编程门阵列）设计中存在跨时钟域,通常会产生亚稳态现象.为有效地预防和解决该问题,分析FPGA设计中亚稳态的产生机理及其对数字信号处理系统的影响.根据不同的信号同步类型,针对单比特电平信号、脉冲信号和边沿信号,分别给出基于触发器级联的跨时钟域信号同步方法;针对并行信号,提出基于异步FIFO （First In First Out,先进先出队列）和握手协议的跨时钟域同步方法;并通过仿真手段分析信号同步方法的有效性及其适用范围.结果表明：这些方法能够正确有效地完成跨时钟域信号同步,预防可能出现的亚稳态问题,从而提高复杂FPGA设计的可靠性和稳定性.     

引入虚拟仪器HS801,推进模拟电子技术实验教学改革

本文介绍了虚拟仪器HS801的基本功能及二次开发技术,给出了该虚拟仪器在模拟电子技术实验教学中的应用方案,并介绍了经验和体会。     

Cardiovascular effects of simulated zero-gravity in humans

Head-down and head-up [correction of heat-up] tilted bedrest (5 degrees) and head out water immersion (HOWI) for 6 hr were compared. Parameters: Cardiac output (rebreathing method), blood pressure (arm cuff), forearm blood flow (venous occlusion plethysmography), total peripheral (TPR), and forearm vascular (FVR) resistances, Hct, Hb, relative plasma volume (PV) changes, and plasma catecholamines (single-isotope assay). During HOWI there was as expected a decrement in TPR, FVR, Mean arterial pressure (MAP, from 100 to 80 mmHg), Hct, and PV, and--as a new finding--catecholamines, which were 30-50% lower compared with both +5 and -5 degrees bedrest. During head down tilt, MAP was elevated (to 100-110 mmHg) and catecholamines did not fall, while TPR and EVR slowly decreased over 6 hr. HOWI is a stronger stimulus than -5 degrees bedrest, probably because HOWI elevates central venous pressure more markedly emptying the peripheral veins, while bedrest permits a distension of veins, which induces an increase in sympathetic nervous activity.     

Does the centre of mass remain stable during complex human postural equilibrium tasks in weightlessness?

In normal gravity conditions the execution of voluntary movement involves the displacement of body segments as well as the maintenance of a stable reference value for equilibrium control. It has been suggested that centre of mass (CM) projection within the supporting base (BS) is the stabilised reference for voluntary action, and is conserved in weightlessness. The purpose of this study was to determine if the CM is stabilised during whole body reaching movements executed in weightlessness. The reaching task was conducted by two cosmonauts aboard the Russian orbital station MIR, during the Franco-Russian mission ALTAIR, 1993. Movements of reflective markers were recorded using a videocamera, successive images being reconstructed by computer every 40ms. The position of the CM, ankle joint torques and shank and thigh angles were computed for each subject pre- in- and post-flight using a 7-link mathematical model. Results showed that both cosmonauts adopted a backward leaning posture prior to reaching movements. Inflight, the CM was displaced throughout values in the horizontal axis three times those of pre-flight measures. In addition, ankle dorsi flexor torques inflight increased to values double those of pre- and post-flight tests. This study concluded that CM displacements do not remain stable during complex postural equilibrium tasks executed in weightlessness. Furthermore, in the absence of gravity, subjects changed their strategy for producing ankle torque during spaceflight from a forward to a backward leaning posture.     

暴时极光区热层大气焦耳加热与F区电离耗空的EISCAT雷达观测

利用ＥＩＳＣＡＴ雷达探测数据，分析计算了太阳活动高年夏季发生的一次强磁暴期间，极光区电离层对流电场、电导率以及焦耳加热速率等着重考察了Ｅ区热怪大气焦耳加热和Ｆ区离子摩擦增温与Ｆ区电子密度耗空的关系发现在下午东向极光电集流期间，电子密度最大耗空出现在Ｆ区３００－３２５ｋｍ高度，时间恰在积分的Ｅ区大气焦耳加热量大值和Ｆ区最大离子增温之后５－１０ｍｉｎ，耗空率达７０％。     

叶片精铸模CAD／CAM研究

介绍了精铸模ＣＡＤ系统的设计思路，针对人工设计中的难点，采用曲面造型、实体造型和特征造型相结合的方法辅助模具设计；重点介绍了分模面的设计原则及其分模面的计算与生成方法，对形状无大的差异而尺寸有所变化的零件进行参数化设计。     

现代战斗机飞行试验的组织管理

本文综述当今世界各国在第三代和第四代现代战斗机研制过程中进行了飞行试验的基本情况。