练内功求实效薄虚名树形象——七一○三厂求真务实抓6S管理

7103厂是从2004年4月5日开始试点推行6S管理工作的，取得经验后在工厂全面推行。如今，各项工作均取得明显成效，从生产一线到机关处室，现场管理得到明显改善，整理、整顿、清洁、规范、素养、安全六要素得到了充分的体现。3A公司的顾问师认为该厂推行6S工作之后，不仅生产环境得到了明显的改善，职工的素养得到了极大的提升，而且形成了职工积极参与6S管理的浓厚氛围，到处洋溢着变革创新的气氛，推行的总体状况达到了国内机加行业一流水平。     

AMSAA模型对一次性使用产品的应用

本文介绍了ＡＭＳＡＡ模型用于一次性使用产品可靠性增长分析的原理及统计分析方法，给出了必要的数表，并以阿里安娜火箭的发射数据为实例，详细地叙述了这种方法的运用过程。     

MX导弹喷管用先进材料评论

目前正在进行研制石墨材料,准备用于MX 第一级和第二级固体火箭喷管的入口部,喉部,后喉部,出口锥和可延伸出口锥。这些材料必须经受住新型洲际弹道导弹(ICBM)喷管系统的苛刻的结构、化学侵蚀,粒子冲刷和高温环境。该系统的燃烧室压力可达127公斤/厘米~2,火焰温度为3700°K 至3922°K。叙述了第一级和第二级全尺寸试验喷管的现状。还提出了在喷管设计、石墨材料研制以及预期性能改进方面进一步工作的方向。     

基于GSM网络的干式变压器温控数据传输系统

本文介绍了基于GSM远程无线干式变压器温度数据传输系统的结构、原理与软硬件设计。     

威布尔分布可靠性下限的F—近似的更正

本文指出,Mann在将她推导的正确的威布尔分布可靠寿命下限的F-近似公式转换成可靠性下限公式时,不慎失误。这个失误的公式已被广泛引用。本文给出了威布尔分布可靠性下限F-近似的正确求法,并用数值例说明这些结果.     

镀膜光纤声光相位调制器频率响应特性的研究

本文对光纤声光相位调制器（OF—AOPM）的频率特性进行研究。分析了OF—AOPM的调相原理，研究结果表明：在调制频率远离氧化锌压电薄膜的半波谐振频率的时候，光相位的调制不仅依靠径向应力。同时还依靠轴向应力。通过同时考虑径向和轴向应力的变化，得出了OF—AOPM在整个频率域范围内的响应特性。     

大客车局部优化造型对其使用性能的影响

随着车速的提高,汽车在行驶中受到的空气阻力便成为不可忽视的问题,因此与减阻节能相关的汽车优化造型也就显得越来越重要了。由于运动物体所受到的空气阻力系数的大小主要取决于它的头部的形状,因而我们对厢式大客车驾驶室前风窗区的几种不同造型在低速风洞中进行了测力的实验研究。实验结果表明,驾驶室前围不同形式的过渡是影响厢式客车空气阻力的重要因素。其中在适当的风窗倾角下,经过良好的圆化处理后,可使厢式大客车的空气阻力减小27%左右。这不仅节省了燃料的消耗,还可以提高汽车的最大行驶速度,改善其加速和爬坡能力。     

Ground and on-orbit command and data handling architectures for the Active Rack Isolation System microgravity flight experiment

The Active Rack Isolation System [ARIS] International Space Station [ISS] Characterization Experiment, or ARIS-ICE for short, is a long duration microgravity characterization experiment aboard the ISS. The objective of the experiment is to fully characterize active microgravity performance of the first ARIS rack deployed on the ISS. Efficient ground and on-orbit command and data handling [C&DH] segments are the crux in achieving the challenging objectives of the mission. The objective of the paper is to provide an overview of the C&DH architectures developed for ARIS-ICE, with the view that these architectures may serve as a model for future ISS microgravity payloads. Both ground and on-orbit segments, and their interaction with corresponding ISS C&DH systems are presented. The heart of the on-orbit segment is the ARIS-ICE Payload On-orbit Processor, ARIS-ICE POP for short. The POP manages communication with the ISS C&DH system and other ISS subsystems and payloads, enables automation of test/data collection sequences, and provides a wide range of utilities such as efficient file downlinks/uplinks, data post-processing, data compression and data storage. The hardware and software architecture of the POP is presented and it is shown that the built-in functionality helps to dramatically streamline the efficiency of on-orbit operations. The ground segment has at its heart special ARIS-ICE Ground Support Equipment [GSE] software developed for the experiment. The software enables efficient command and file uplinks, and reconstruction and display of science telemetry packets. The GSE software architecture is discussed along with its interactions with ISS ground C&DH elements. A test sequence example is used to demonstrate the interplay between the ground and on-orbit segments.     

MX导弹喷管用先进材料评论 Ⅱ 第一级喷管的先进材料

本文是评论MX导弹喷管先进材料的三篇文章中的第二篇。第一篇文章于1977年4月在SAMPE季刊中发表(译文见“固体火箭技术”1978年第二期第99—105页),综述了MX导弹喷管对材料的要求,叙述了石墨材料的结构、性质和性能之间的关系。本文继续对MX的第一级和第二级发动机喷管所用先进材料进一步进行评价。     

Effect of weightlessness on posture and movement control during a whole body reaching task

Here are reported preliminary results of the “Synergy” experiment performed aboard the Russian orbital station “MIR” in July 1993 (Altaïr Mission). The experiment was carried out before, during, and after the space flight of two astronauts (S1 and S2). The duration of the flight was 21 days for S1 and 6 month for S2. The subjects were tested during preflight, inflight and postflight. The astronaut subjects were fixed on the ground by the feet. They were asked to pick up a box in front of them on the ground. Two velocities of movement and two distances of the target to be reached were tested. The movement of several small markers placed on the body was recorded on video tape.

Results show that the shape of head and hand trajectories in the sagittal plane remains roughly the same during the flight in spite of the modification of mechanical constraints. Trajectory invariance does not result in joint angular displacement invariance. These data indicate that the planning of the movement takes place in terms of head and hand trajectories rather than joint rotations as it was previously suggested for simple arm reaching movement.