利用零运动避免SGCMG框架轴转速死区的方法

研究了应用SGCMG零运动避免框架轴转速死区的方法。利用奇异值分解的方法对SGCMG的零运动进行分析,提取正交的零空间基底与各个基底对应的坐标值。以SGCMG零运动尽量远离零为原则选取性能指标,令性能指标取极小,求解出零空间基底坐标方向的单位列阵。以每一个SGCMG的框架轴转速均大于死区转速为准则,给出了选取零空间基底坐标列阵模长的方法。设计SGCMG零空间基底坐标的调节策略,能使得SGCMG长时间运行在框架轴转速死区外。最后给出含有卫星姿态控制系统的仿真实例,校验了所设计零运动的有效性。     

强信号背景下弱信号角度时延的联合Capon估计方法

针对强信号背景下弱信号角度时延联合估计过程中的弱信号数目难以精确估计问题,在分析Capon谱估计法估计信号DOA原理的基础上,将Capon谱估计法进行扩展,提出了一种在强信号背景下弱信号角度时延联合估计方法。为弥补Capon法分辨力较差的劣势,将扩展的Capon法与有高分辨性能的m-Capon算法结合,提出了一种改进的m-Capon方法,能区分来波方向接近的不同目标信号。研究和仿真结果表明:该方法无需对弱信号的信源数进行估计,也无需分解特征值,且在快拍数较少时仍具适用性。     

Flapping Characteristics of 2D Submerged Turbulent Jets in Narrow Channels

Flapping characteristics of the self-excited flapping motion of submerged vertical turbulent jet in narrow channels are studied theoretically and experimentally. It is found that the water depth is a most important parameter to the critical jet exit velocity and the jet flapping frequency. The results indicate that the critical jet exit velocity increases with water depth and the jet flapping frequency is inversely proportional to the water depth. Mean-while, experimental result also shows that the surface disturbance wave changes the frequency of flapping motion, i.e. the flapping frequency locks-in the disturbing frequency when the disturbing frequency is near and less than the natural flapping frequency.     

加强机务班组建设

一线机务班组是机务系统中的最基层组织,为保证航空安全必须使一线机务班组的管理具有有效性,以使团队在职业道德、工作效率、效益成果等有较为突出的表现。并使班组成员通过有效地管理个人能力得到提升,在团队中找到归属感与成就感。     

The application of micro-CT in monitoring bone alterations in tail-suspended rats in vivo

Osteopenia is a pathological process that affects human skeletal health not only on earth but also in long-time spaceflight. Micro-computed tomography (micro-CT) is a nondestructive method for assessing both bone quantity and bone quality. To investigate the characteristics of micro-CT on evaluating the microgravity-induced osteopenia (e.g. early detection time and the sensitive parameters), the bone loss process of tail-suspended rats was monitored by micro-CT in this study. 8-Week-old female Sprague Dawley rats were divided into two groups: tail suspension (TS) and control (CON). Volumetric bone mineral density (vBMD) and microstructure of the femur and tibia were evaluated in vivo by micro-CT at 0, 7, 14, 22 days. Biomechanical properties of the femur and tibia were determined by three-point bending test. The ash weight of bone was also investigated. The results showed that (1) bone loss in the proximal tibia appeared earlier than in the distal femur. (2) On day 7, the percent bone volume (BV/TV) of the tibia 15.44% decreased significantly, and the trabecular separation (Tb.Sp) 30.29% increased significantly in TS group, both of which were detected earlier than other parameters. (3) Biomechanical properties (e.g. femur, −22.4% maximum load and −23.75% Young’s modulus vs. CON) and ash weight of the femur and tibia decreased significantly in the TS group in comparison to CON group. (4) vBMD of the femur and tibia were clearly related to bone ash and dry weight (r = 0.75–0.87, p < 0.05). (5) BV/TV of both femur and tibia were clearly related to maximum load and Young’s modulus (r = 0.66–0.87, p < 0.05). Similarly, trabecular vBMD and BV/TV of the femur and tibia were clearly related to Young’s modulus (r = 0.73–0.89, p < 0.05). These indicated that BV/TV and Tb.Sp were more sensitive than other parameters for evaluating bone loss induced by tail suspension, moreover, trabecular vBMD and other parameters might be used to evaluate bone strength. Therefore, micro-CT is a reliable and sensitive method for predicting unloading-induced bone loss in small animals.     

The influence of the spatial and temporal collocation windows on the comparisons of the ionospheric characteristic parameters derived from COSMIC radio occultation and digisondes

GPS radio occultation (RO) ionospheric products obtained by Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) mission during the year of 2014 and the observations from 3 digisonde stations which are located at different latitudes are used to study the influence of different time and space collocation windows on the comparisons of the ionospheric characteristic parameters (ICPs), including the peak density and peak height, derived from the two techniques. The results show that the correlation coefficients (CC) and the standard deviation of the absolute biases (SDAB) between the ICPs derived from the two techniques vary distinctly under different spatial and time collocation windows. Generally, the CC (SDAB) of the ICPs decrease (increase) as the size of the collocation window increases in time dimension or in space dimension. The rate of change of the statistic parameters with the increase in the size of the collocation window in time dimension and space dimension is analyzed for each digisonde station. It is found that within the collocation window of $\left(60\mathrm{m}\mathrm{i}\mathrm{n},{20}^{°},{20}^{°}\right)$, the influence of the increase of $1^{°}$ in the space window on the statistical comparison is much more significant than that of the increase of 1?min in the time window, and it is suggested that there can be appropriate relaxation on the time window within the threshold of 60?min to get a balance between the quality of the comparison results and the number of the matched pairs. In addition, it is found that the same variations in the longitude window and in the latitude window may have different influences on the comparison results when the horizontal gradients in electron density are distinctly different along different directions at the digisonde station, and strict space collocation window is preferred when comparing the observations from COSMIC RO with those from the digisonde station in such cases.     

基于噪声乘积的伪码调相引信灵巧噪声干扰

伪码调相引信具有良好的抗干扰能力,是引信电子对抗的重点研究对象。根据噪声乘积调制的灵巧噪声干扰的产生机理,推导出当其作用于引信时伪码调相引信的输出信号的形式。说明基于噪声乘积的灵巧噪声干扰对伪码调相引信能形成欺骗性和压制性干扰的效果,并通过仿真实验验证了这一分析的正确性。基于噪声乘积的灵巧噪声干扰具有欺骗性和压制性干扰的双重效果,能够形成幅值随机的多假目标干扰,同时降低干扰机侦察设备的要求,针对不同的干扰对象,通过调整干扰参数,可以得到不同的干扰效果。     

无人机制造外形气动偏差评估方法

气动外形对无人机起着至关重要的作用,有必要对其制造外形的气动偏差进行评估。利用数字摄影测量系统获得无人机制造外形的点云数据;以机头为参考点,将测量点云数据模型与理论模型的坐标系重合,对比重合度并统计无人机制造外形与理论外形的几何偏差分布;根据点云数据进行逆向建模,获得无人机制造外形的三维模型;对无人机理论外形进行CFD计算,与其风洞试验数据进行对比,通过调整网格及计算方法,得到与试验数据相吻合的CFD计算方法;以此方法计算得到无人机制造外形的气动数据,并与无人机的理论气动力进行对比。结果表明:此评估方法能够定量地评估外形制造偏差对无人机气动特性的影响。     

视觉无人机棚内煤场自主飞行与地图构建

针对目前室内大型煤场煤储量估计方法中,固定位置激光打点方式存在盲区、不灵活、精度差,以及基于多旋翼无人机的方法难以适应无GPS的室内环境等缺点,提出结合视觉定位的无人机室内自主飞行盘煤方法。该方法通过融合5个方向的视觉信息,并结合无人机路径规划及避障算法,对煤堆进行了全覆盖的视觉成像,然后,通过运动推断结构方法进行三维建模,用于估计煤储量。经实验验证,所提方法有较好的室内定位精度,基于三维建模的煤堆储量估计与实际储量较为接近,证明了其有效性和可行性。     

空间光学系统真空热试验污染控制经验综述

真空热试验过程中光学系统可能受到严重污染,因此需制定严格的污染控制措施。文章对NASA、ESA、JAXA 等航天机构的卫星光学系统真空热试验中典型、有代表性的污染控制经验进行了综述,并对我国光学系统真空热试验污染控制提出了若干建议。