开口薄壁截面梁的弯心坐标的简便计算

针对开口薄壁截面梁的剪流和弯心坐标的复杂计算问题,导出了简便计算公式。对于由n个小矩形组成的开口薄壁截面,可以用图乘法计算弯心坐标,避免了复杂的积分运算。     

无头铆钉成型过程的有限元仿真与试验分析

采用ABAQUS建立有限元分析模型,分析了66°锥形铆模压铆无头铆钉的成型过程。对成型后的试片进行了力学及金相分析,并将结果与普通半圆头铆钉进行对比。研究结果表明,无头铆钉的压铆变形过程为钉杆中间最早涨粗,墩头部分成型,随后钉杆部分逐步与孔壁均匀挤压的过程;随着压铆位移的增加,无头铆钉拉脱强度及剪切强度均呈上升趋势;与传统平铆模成型的半圆头铆钉相比,在锥形铆模的作用下,金属材料向钉杆流动更加均匀,墩头两侧的绝热剪切效应明显弱化。     

Experimental Study on Emission Performance of an LPP/TVC

A key issue in the commercial aircraft engine design is environmental acceptability, and designers are continually challenged to reduce emissions. In this paper, an experimental investigation is performed to evaluate the emission performance of a liquid-fueled trapped vortex combustor (TVC) under lean premixed prevaporized (LPP) mode. When operating as an LPP system, a TVC is fueled both in the cavities and in the main stream. The correlations between the emission performance and the total excess air ratio, the positions (4 positions) of the fuel injectors in the main stream, and the inlet temperature are obtained. Experi- mental results show that both the volume concentrations of unburnt hydrocarbon (UHC) and NOx (NO, NO2 usually grouped together as NOx) increase with the increase of total excess air ratio from 1.5 to 3.0; the emission performance relies heavily on the position of the main stream injector, and the best performance is achieved at Position 4 in the experiments; the increase of the inlet temperature impacts on the emission performance positively; the smallest volume concentrations of UHC and NOx obtained in the experiment are 94×10 6 and 2.3×10 6 respectively. This paper validates the feasibility of low emissions for an LPP/TVC and provides a reference for further optimization of TVCs.     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.     

Jets Downstream of Collisionless Shocks

Space Science Reviews - Particles are accelerated to very high, non-thermal energies in solar and space plasma environments. While energy spectra of accelerated electrons often exhibit a power law,...     

空间站常用元器件的霉菌敏感性研究

为研究空间站常用元器件的霉菌敏感性,选取空间站常用11大类元器件,针对霉菌对元器件的可能影响进行深入分析。基于空间站特定霉菌环境设计了加速试验方案,研究建立了基于元器件损伤程度的敏感等级分类方法,获取了不同元器件对霉菌的敏感性结果以及对应的敏感部位,为后续空间站用元器件质保工作的完善奠定基础。     

View-dependent progressive transmission and rendering for lunar model based on bicubic subdivision-surface wavelet

Given the fact that the back of the digital lunar model is invisible from any viewpoint, a view-dependent progressive transmission and rendering method for lunar model is proposed and a client-server browsing system is implemented. On the server side, the semi-regular lunar surface is partitioned into dozens of segments, and each segment is compressed independently using bicubic subdivision-surface wavelet and SPIHT. For any viewpoint, only the data of the visible segments are transmitted to the client side progressively, then decoded and locally reconstructed there. This approach not only improves the efficiency of transmission, but also reduces the reconstruction time greatly. We can browse the lunar model on the client almost in realtime.     

真空出气对星用聚酰亚胺材料电导率的影响

卫星介质材料在真空环境下的出气有可能对材料本身的介电性能产生显著影响,增加长期服役卫星寿命末期的充放电风险。文章以卫星上常用的聚酰亚胺材料为对象,通过地面90Sr-90Y辐照源加速辐照试验研究了在材料真空出气后其表面充电平衡负电位的变化,并据此计算出材料电导率的变化规律。结果显示,在5 pA/cm2电子辐照强度下,聚酰亚胺样品的电导率随着出气量的增加而明显下降,在总质量损失达到0.5%时,电导率减小一半左右。初步分析了出气导致电导率下降的物理机制。研究结果对卫星寿命末期充放电防护设计有指导意义。     

Fractional order tension control for stable and fast tethered satellite retrieval

The retrieval of a tethered satellite system is intrinsically unstable. This paper develops a new control strategy to retrieve the tethered satellite system stably and quickly using the fractional order control theory. The governing equation of the tethered satellite system and classic linear feedback tension control law were first reviewed and examined as a benchmark. Then, a new fractional order tension control law has been to avoid the tethered satellite winds around the main satellite near the end of retrieval by existing integer order tension control laws. The newly proposed control law has been discretized and implemented by the Laplace transform and Tustin operator. Unlike the existing integer order control laws, which are based on the feedback of current state and memoryless, the fractional order control law has the memory of previous states and thus controls the tether retrieval more smoothly while maintaining the retrieving speed. The effectiveness and advantage of the new fractional order tension control law is demonstrated numerically by comparing with its integer order counterpart. The results show that the new control law not only retrieves the subsatellite without winding around the main satellite, but also provides a better control performance with smaller in-plane libration angles.     

基于球几何特征的摄像机内参分步标定方法

在摄像机标定过程中,球形靶标对图像数量、拍摄角度要求小,能够适应遮挡环境,在使用中具有明显优势.在分析球投影模型几何性质的基础上,提出一种利用球靶标分步标定摄像机内部参数的方法.该方法通过拍摄一幅包含空间中2个不同位置球体的图像,得到图像中的2条投影二次曲线;利用2条投影二次曲线的对称轴和公切线计算球心投影点,通过投影二次曲线的对称轴确定图像主点坐标,根据球心投影点和图像主点的位置关系求解归一化焦距;利用整体优化算法得到内参标定结果.仿真数据实验分析了引入测量误差的主要因素,实物标定结果与平面方格靶标方法相比误差在5%之内,重复测量结果稳定.