在中面载荷作用下正交各向异性矩形板后屈曲行为分析

本文利用摄动法和广义傅氏级数法分析了在中面载荷作用下正交各向异性矩形板后屈曲行为,对几种典型的纤维增强环氧复合材料矩形板后屈曲行为给出了结果,可供工程设计应用参考。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

异步电动机的最小能量运行点

在异步电动机的一般数学模型基础之上，提出了本文使用的数学模型。和一般数学模型相比，此模型对异步电动机转子电阻的变化较不敏感。借助异步电动机的期望电磁转矩，推导出了参数化的状态运行点(定子电流和磁链在稳定状态下的值)一最小能量运行点，得到异步电动机的最小能量运行条件。     

计算机辅助机械设计的实践与研究

本文结合作者编制计算机辅助机械设计课程设计应用软件的经验，介绍了机械设计中计算机应用程序的构造、流程和数据处理方法，这些方法适用于计算量大、数据量多的设计过程。     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

开放式飞行任务规划方法

本文给出了一种基于分布式黑板结构的开放式飞行任务规划方法，简要叙述了飞行器飞行任务规划的概念和其独特要求，并对飞行任务规划的数据预处理、知识表达、规划方法作了深入的探讨。最后介绍了分布式黑板的结构和运行方式。     

舰载导弹的动基座对准

本文将状态与偏差解耦卡尔曼滤波器应用于动基座对准中，根据舰载导弹动基座对准的特点，引入闭环，即在滤波过程中周期性地将滤波值补偿姿态失调角、速度误差和惯性元件误差。仿真结果表明，该方法能使收敛速度加快，估计精度提高，滤波值的振荡幅度减小。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.