飞机外形件三角网格模型光滑B样条曲面重建

综合考虑曲面重建时的拟合精度、曲面片拼接处的连续性和曲面的光顺性等因素,以三角网格模型的双三次B样条曲面重建为例,研究了飞机外形件三角网格模型的分片光滑B样条曲面重建方法。该方法首先采用最小二乘法逼近散乱数据,初步获得分片B样条曲面;然后将光顺准则加权到最小二乘函数中调节曲面光顺程度;最后运用罚函数法保证曲面片边界近似G1连续。将该方法应用于飞机外形件实测数据的曲面重建,误差分析结果验证了方法的有效性。     

高强高模聚乙烯纤维对大掺量矿物掺合料高强混凝土抗冻性的影响

用快冻法研究高性能的高强高模聚乙烯(High elasticity module polyethylene,HEMP)纤维对大掺量矿物掺合料高强混凝土(High strength concrete,HSC)抗冻性的影响.结果表明,大掺量矿物掺合料HSC具有较好的抗冻性,但是其抗冻性对养护环境RH非常敏感,干燥养护条件下的冻融寿命仅有标准养护的38%～40%.掺加0.1%HEMP纤维虽然降低了大掺量矿物掺合料HSC的抗冻性,但能够显著改善其抗冻性对养护环境RH的敏感性,在30%RH～50%RH养护条件下的冻融寿命高达标准养护时的81%～90%.     

低压断路器灭弧室温度检测

设计了基于光纤光栅传感系统的低压断路器灭弧室温度检测装置,实验测量出灭弧室温度数据,进行了数据的有限元分析,绘制出灭弧室内温度场分布图.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

集团化实验室信息管理系统中台建设实践

中台通过重新构建企业级的服务能力,消除企业内部各业务部门、各分子公司间的壁垒,可更好的适应企业发展。描述了当前中台发展现状,结合集团化计量检测机构特点,提出了实验室信息管理系统中台的一种划分方法,为集团化实验室信息管理系统建设提供一种解决方案。实现企业业务、资源、财务的综合管理,提升企业管理能力。     

飞机装配型架骨架CAD技术研究与实现

对型架骨架CAD技术进行了研究.以CATIA为平台运用CAA工具开发了包括设计线框库和型材库、型材扫掠和相交处理工具等功能的飞机装配型架骨架CAD系统.使型架骨架设计规范性、经验知识及其设计重用性方面得到改善.     

四大创新技术彰显不同Sun让X86服务器更强大

2009年5月7日,面向中国市场,Sun公司全面推出了基于英特尔至强5500处理器的"开放式网络"服务器产品线,它以强大的性能优势和冷却功能,帮助客户提高了服务器的性能和可扩展性,并全面降低了成本.     

无虚拟节点罚函数位移协调法

基于罚函数提出了一种界面协调技术——无虚拟节点罚函数位移协调法,推导了该界面协调技术的耦合公式,证明了当惩罚参数y趋于无穷大时该方法的解趋于理论解.该方法的刚度矩阵具有对称性、带状性,同时该法还有精度高、计算效率高等优点.最后,通过算例分析,验证了其合理性.     

Focus Reflective Shock Wave Interaction with Flame

An experiment on deformation of flame under the effect of focusing shock wave reflection is performed with the help of multiple-spark camera to understand the flame instability of the deformation process. Methane and oxygen are mixed stoichiometrically to be used in the experiment. Based on Navier-Strokes equations, two-dimen- sional axisymmetric elementary reactions are numerically simulated. And the simulation results are solved by opti- cal calculation. Shaded pictures by simulation fit well with experimental photos. Focusing reflecton shock waves can affect the flame, which accelerates the deformation of flame and renders violent burning in high-energy flam- mable gases behind waves. Therefore anticlockwise whirlpool appears. It clusters around the external surface of flame and has a tendency to develop toward the right. Finally, the whirlpool focuses on the right side of the flame, which involves the fresh unfired gases into the whirlpool circle, and consequently the head of mushroom cloud is formed. Meanwhile, when shock wave passes through the flame, the intensity of the shock waves on the axis is strengthened.