大型复合材料结构优化设计方法研究

建立了适合于大型复合材料结构的优化设计方法，该方法在复合材料结构有限元分析的基础上对复合材料结构进行优化设计。在建立有限元模型时应用了区域划分技术，然后对结构分两级进行优化：第一级是对结构的铺层角度进行优化。第二级对结构的铺层厚度进行优化。最后，以工字梁结构为例，进行了算法验证。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。     

传感器故障诊断方法研究

对近年来传感器故障诊断和信号恢复的方法，包括硬件冗余、分析冗余和人工神经网络方法作了总结，并指出了它们的优缺点便为进一步研究传感器故障诊断和信号恢复方法提供启示。     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

International cooperation in space — new opportunities, new approaches : An assessment

Now that the Cold War is over, the authors of this Viewpoint believe that in the interests of the USA as well as the rest of the world international cooperation should become a more fundamental element of US space policy. Cooperative agreements will not always be easy to reach and will require creative statecraft. To that end the USA should take the initiative in establishing a high-level international policy forum to facilitate discussions on the main goals and objectives to be served by international cooperation in space.     

微型FM/FM副载波解调器的设计与实现

介绍一种应用于FM/FM遥测系统的微型副载波解调器,相时于传统副载波解调器单独使用硬件进行解调处理的模式,系统在硬件上直接对多路副载波信号进行高速采样,然后将数据通过USB2．0总线实时上传到计算机,利用计算机强大的数字运算能力对副载波信号进行解调。这种方式极大地减小了硬件系统的尺寸和成本,并且便于实现对FM/FM遥测信号的存储和进一步分析处理。     

JY21航管一次监视雷达信号处理设计

一、系统概述JY21航管一次机场监视雷达是中国电子科技集团公司第三十八所按中国民航空中交通管制需求研制的新一代机场监视雷达,该雷达集飞机监视和气象探测于一体,具有独立的目标通道和气象通道,可以自动提取飞机点迹数据和6个等级气象反射率数据,信号处理作为航管雷达的关键