一种求解核函数方程的新方法—辅助核法

本文提出了求解核函数方程的辅助核法。此法克服了偶极子栅格法对网格分布的限制,具有更大的适用范围。数值计算表明,此法对求解绕翼型的跨声速激波流动是很有利的。     

飞机带外挂对称结构振型局部化的参数影响

本文在文〔１〕研究的基础上，详细分析了飞机左右对称子结构间的耦合度以及外挂联接刚度失调量的大小等因素对振型局部化程度的影响。通过具体的数据揭示了各参数对局部化程序的影响规律。     

数值求解二维定常跨音速流场多重解现象探讨

本文用时间推进法求解欧拉方程组计算二维平面叶栅绕流问题数值实验是否有多重解现象。计算结果表明,求解欧拉方程组进行流场数值模拟最终收敛与初场无关,不存在解不唯一问题,进而计算初场熵值大小,也发现初场熵值大小不影响终场结果。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

扰流柱排内换热的实验研究

在来流雷诺数为2000～100000的范围内,对装有扰流柱排的矩形通道内的局部换热系数进行了详细的测量,得到了扰流柱排强化换热的规律,对强化换热的机理进行了探讨。      

三维扩压叶栅通道涡数值模拟

本文介绍了三维扩压叶栅通道涡的一种简单数值模拟方法,对椭圆方程采用抛物化处理后进行计算,简单、省机时省存贮。文中采用这种方法对一种近似扩压叶栅的特殊扩压管道进行了计算,旨在定性分析扩压叶栅的通道涡。叶栅通道涡由四部分组成,在直列静叶栅中吸力面根、顶部工作情况恶劣,对环形静叶栅通道吸力面根部情况最不好,因此改善静叶栅通道流动状况应主要解决吸力面根部的流动,而采用弯叶片是解决这一问题的重要手段之一。      

B／Al单向铺层复合板的力学性能及断裂行为的研究

研究了热压扩散结合工艺对Ｂ／Ａｌ复合材料的强度的影响,并对试样拉伸断口及断裂径进行了研究,分析表明,试样断口有三种断裂模型,断裂路径同热压工艺有密切的关系。     

波瓣数对波瓣S型混合二元喷管气动热力性能影响

依据某型涡扇发动机波瓣S型混合二元喷管,保持波瓣混合器长度、内扩张角、外扩张角以及宽高比不变,依次取波瓣混合器波瓣数为12,14,16,18,20,建立了一组具有不同波瓣数的波瓣S型混合二元喷管模型.采用经过验证的CFD方法,研究了波瓣数对波瓣S型混合二元喷管气动热力性能的影响规律.结果表明:在波瓣尾缘截面至第1个S弯截面区域,波瓣数对流体混合程度产生很大影响,并且热混合效率近乎随波瓣数增加而增加.在第1个S弯截面至波瓣S型混合二元喷管出口截面区域,波瓣数为16的波瓣S型混合二元喷管模型的总压恢复系数始终最低,其余模型的总压恢复系数以及热混合效率没有明显差别.在波瓣S型混合二元喷管出口截面上,波瓣数为16的波瓣S型混合二元喷管模型的热混合效率最高,达到0.850,然而其总压恢复系数相对于该截面上最高值下降了0.289%.此外,波瓣S型混合二元喷管的渐缩型流道能够提高流向涡强迫混合效果,但同时也加速流向涡的耗散速率.      

一种新的加权最小二乘支持向量回归机及其对性能退化航空发动机推力估计的应用(英文)

要实现航空发动机的性能退化缓解控制,需要设计一个高精度并具有良好实时性的推力估计器。针对这种需要,本文提出了一种新的加权最小二乘支持向量回归机,并在此基础上设计了性能退化推力估计器。和现有的加权策略相比较,基于此新的加权策略的推力估计器不仅能满足性能退化缓解控制对精度的要求也能满足实时性的要求。最后,仿真实验证明此加权最小二乘支持向量回归机以及基于此回归机设计的推力估计器的有效性和可行性。