气象卫星数字基带信号解码的两种方法

论述利用计算机对气象卫星数字基带信号解码的两种方法。方法一是在开环条件下对基带采样跟踪与智能判决。方法二是基于最优检测原理 ,在分相码 (Manchester码 )的解码中简化了正交积分锁相环 ,采用单积分器辅助计算机智能判断 ,对基带实现最优检测     

宽带数字信道化接收机技术的热点和发展趋势

数字信道化接收机具有瞬时频带宽、动态范围大、能实现超宽带侦察的特点,能较好地满足现代电子战接收机的要求。首先介绍了数字信道化接收机的基本原理,在此基础上,重点分析了数字信道化接收机在信道化过程中的研究热点和难点,并简述了信道化接收机技术的发展趋势。     

轮控小行星探测器建模及跳跃移动仿真

小行星探测器在弱引力环境下无法采用传统的轮式机构进行移动。为解决该问题,采用反作用飞轮对探测器跳跃移动进行控制,并分析了该方案的可行性。根据Hertz碰撞定律及简化的Karnopp切向摩擦力模型,建立了探测器与地面的接触力模型。分析了轮控小行星探测器的起跳过程,给出了探测器静止起跳所需要的最小飞轮力矩关系。考虑到反作用飞轮存在惯性、粘滞、摩擦等情况,建立了轮控探测器的姿态动力学模型,并对探测器在均匀重力场下的连续跳跃过程进行了控制策略设计及仿真。结果表明:基于飞轮控制的小行星探测器跳跃移动在微重力环境下是可行的,且可以通过施加合适的控制力矩维持探测器跳跃的方向及跳跃过程的稳定性。     

基于FPGA控制实现的1553 B总线通讯设计

为了满足有效载荷系统与卫星平台的复杂任务和可靠的数据通信,提 出了一种基于FPGA控制协议芯片BU-61580实现1553B总线远程终端通讯的 设计方法.取代CPU而采用VHDL硬件描述语言将整个系统的数据管理与控 制通讯集中在1片FPGA芯片内实现,有利于系统的软件重用和增加系统可 靠性.     

双模GNSS接收机中可重构FFT处理器设计

在双模GNSS接收机中,GPS和BD2卫星的PN码长度不同,造成接收机中的捕获通道不能通用。提出一种可重构的FFT实现方法,利用1024点FFT以及可复用的基2/基4处理单元组成可重构FFT,实现2048点FFT或4096点FFT,使得接收机能够利用同一个FFT模块捕获GPS信号或BD信号,从而节省了接收机的硬件资源。同时可通过复用FFT的方法共用捕获通道,为提高捕获速度和精度提供硬件基础。     

0.8m 风洞风扇系统的设计和运转

为提高低速风洞的最大风速,根本的措施是设计高转速大功率的风扇系统。风扇系统的设计首先在于有一个良好的设计方法,选择高升阻比的风扇翼型,根据需要恰当地确定设计工况点,合理选择桨叶和反扭导流片的各个参数,如桨毂比、实度、升力系数和圆弧角等。设计中针对已经设计的外形,进行性能计算,可以迅速鉴别设计的优劣,检查是否能满足设计要求,节约研制成本和缩短周期。     

Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning

 There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is es-sential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and riveting. Therefore, this article presents a new multi-objective optimization method based on ant colony optimization (ACO). Multi-objective optimization model of automatic drilling and riveting sequence planning is built by expressing the efficiency and accuracy of riveting as functions of the points’ coordinates. In order to search the sequences efficiently and improve the quality of the sequences, a new local pheromone updating rule is applied when the ants search sequences. Pareto dominance is incorporated into the proposed ACO to find out the non-dominated sequences. This method is tested on a hyperbolicity panel model of ARJ21 and the result shows its feasibility and superiority compared with particle swarm optimization (PSO) and ge-netic algorithm (GA).     

Improved ZCS-PWM commutation cell for IGBTs application

An improved zero-current-switching pulsewidth-modulated (ZCS-PWM) commutation cell is presented, which is suitable for high-power applications using insulated gate bipolar transistors (IGBTs) as the power switches. It provides ZCS operation for active switches and zero-voltage-switching (ZVS) operation for passive switches. Besides operating at constant frequency and reducing commutation losses, the proposed ZCS-PWM switch cell has no additional current stress and conduction loss in the main switch. To demonstrate the feasibility of the proposed ZCS-PWM commutation cell, it was applied to a boost converter. Operating principle, theoretical analysis, design guidelines, and a design example are described and verified by experiment results obtained from a prototype rated 1 kW and operating at 40 kHz. The PWM switch model and state-space averaging approach is also used to estimate and examine the steady-state and dynamic character of ZCS-PWM boost converter system. Finally, the application of the proposed soft-switching technique in the dc-dc nonisolated converters is presented.