Potential Effects of Surface Temperature Variations and Disturbances and Thermal Convection on the Mars InSight HP<Superscript>3</Superscript> Heat-Flow Determination

The HP³ instrument on the InSight lander mission will measure subsurface temperatures and thermal conductivities from which heat flow in the upper few meters of the regolith at the landing site will be calculated. The parameter to be determined is steady-state conductive heat flow, but temperatures may have transient perturbations resulting from surface temperature changes and there could be a component of thermal convection associated with heat transport by vertical flow of atmospheric gases over the depth interval of measurement. The experiment is designed so that it should penetrate to a depth below which surface temperature perturbations are smaller than the required measurement precision by the time the measurements are made. However, if the measurements are delayed after landing, and/or the probe does not penetrate to the desired depth, corrections may be necessary for the transient perturbations. Thermal convection is calculated to be negligible, but these calculations are based on unknown physical properties of the Mars regolith. The effects of thermal convection should be apparent at shallow depths where transient thermal perturbations would be observed to deviate from conductive theory. These calculations were required during proposal review and their probability of predicting a successful measurement a prerequisite for mission approval. However, their uncertainties lies in unmeasured physical parameters of the Mars regolith.     

曲面和任意取向表面表面摩阻油膜测量法的进展

本文叙述曲面和任意取向表面表面摩阻测量方法的进一步的发展。介绍用漫射照明获取薄油膜等厚度干涉条纹谱的理论根据和实验结果。讨论了通过油流显示图像的分析,自动探测表面流线方位的可能性。所得结论表明油膜法也能应用于复杂的三维流动。     

弹道靶中超高速发射弹的流场及空气动力特性研究(英)

本文描述的是研究爆炸成型发射弹（ＥＦＰ）模型的流场及超高速空气动力特性所用的弹道试验设备;简要报导了记录全尺寸干涉图形的技术;对径向密度分布再现的方法进行了讨论;在零攻角实验时不同模型的空气动力阻力是采用简化方法来计算的;对各种不同ＥＦＰ型式的气动稳定性提出了定性估计的方法;并阐述了用于组合体超高速飞行特性研究的数值计算技术的基本原理     

用薄板等积变换方法制造起伏构造的工艺问题研究(英文)

研究了用于夹层壁板的新型轻质芯材的制造问题。该种芯材是一种可改变平面方向的褶皱构造。采用薄板等积变换通过局部弯曲而不拉伸材料的方法制造该种芯材已成为可能。其主要难点在于 ,必须实现沿复杂的展开图上所有的画线同时弯曲。现借助于成形过程中使原来的构形组件变形解决其造型问题。本文提出的工艺方法可用于不同材料的深度起伏构造制造 ,如金属薄板和纸等。     

Orbiting solar telescope on “Salyut-4” station

The orbiting solar telescope on Salyut-4 (F = 2,5 m, d = 250 mm) produces images of the Sun on the entrance slit of a stigmatic two-grating spectrograph (R₁ = 1 m, N₁ = 1200 lines/mm; R₂ = 0.5 m, N₂ = 2400 lines/mm, dispersion 16 Å/mm, spectral resolution 0,3 Å). The automatic system keeps the observed solar features on the slit of the spectrograph with an accuracy of 3–4 arc sec. The far UV-spectra (970–1400 Å) of solar flares, brightenings, flocculi and prominences were photographed and fresh coatings of mirrors were made during the flight.     

A broad climatology of very high latitude substorms

Magnetic data from a newly commissioned Indian Antarctic station Bharati (corrected geomagnetic (CGM) coordinates 74.7°S, 97.2°E) and closely-spaced IMAGE chain observatories (∼100° magnetic meridian in Northern hemisphere) has been analyzed to study the climatology of substorms which were localized poleward of the standard auroral oval. We considered four austral summers (year 2007–2010) when data from Bharati was available. Several very high latitude substorms were observed in this duration when the solar activity remained unexpectedly low for a long time. Various features of very high latitude substorms, e.g., local time dependence, interplanetary state, hemispherical asymmetry and their nightside low latitude signatures are examined. Events studied here, suggested the following properties of substorms occurring at very high latitudes: (1) maximum occurrence was observed near magnetic midnight (21:00–02:00 MLT). (2) In contradiction to earlier reports, many substorms were observed even during negative IMF Bz condition. In addition, majority of substorms occurred during low or moderate solar wind streams. (3) Magnetic signatures were often pronounced in the winter hemisphere. (4) Even if widely used standard AE indices fail to monitor very high latitude substorms, their low latitude signatures are often evident.     

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

再生型木塑复合材料的研究

为了充分利用城市固体废弃物中的各项资源,本项工作将固体废弃物中的高密度聚乙烯(H igh dens itypo lyethy lene,HDPE)回收后与废弃的木纤维进行复合,成功地制备出再生型木塑复合材料。研究了木纤维长度、含量以及相容剂对木塑复合材料热性能和力学性能的影响。通过扫描电子显微镜观察了复合材料的冲击断口形貌,分析了此类复合材料的断裂机制。结果表明:木纤维的加入使HDPE的结晶温度降低,结晶速度减慢;相容剂的加入大大改善了木纤维与基体树脂之间的界面结合。随着木纤维含量的增加,木塑复合材料的弯曲强度升高,冲击强度下降。