High Dynamic GPS Receiver Using Maximum Likelihood Estimationand Frequency Tracking

A new high dynamic global positioning system (GPS) receiver ispresented and its performance characterized by analysis,simulation, and demonstration. The demonstration receiver is abreadboard model capable of tracking a single simulated satellitesignal in pseudorange and range rate. Pseudorange and range rateestimates are made once every 20 ms, using a maximum likelihoodestimator, and are tracked by means of a third-order fadingmemory filter in a feedback configuration. The receiver trackspseudorange with rms errors of under 1 m when subjected tosimulated 50 g, 40 g/s circular trajectories. The tracking thresholdis approximately 28 dB·Hz, which provides 12 dB margin relativethe the minimum specified signal strength, assuming 3.5 dB systemnoise figure and 0 dB antenna gain.     

Global magnetic attitude control of spacecraft in the presence of gravity gradient

The problem of Earth-pointing attitude control for a spacecraft with magnetic actuators is addressed and a novel approach to the problem is proposed, which guarantees almost global closed loop stability of the desired relative attitude equilibrium for the spacecraft. Precisely, a proportional derivative (PD)-like state feedback control law is employed together with a suitable adaptation mechanism for the controller gain. Simulation results are presented, which illustrate the performance of the proposed control law     

Defining life

Any definition is intricately connected to a theory that gives it meaning. Accordingly, this article discusses various definitions of life held in the astrobiology community by considering their connected "theories of life." These include certain "list" definitions and a popular definition that holds that life is a "self-sustaining chemical system capable of Darwinian evolution." We then act as "anthropologists," studying what scientists do to determine which definition-theories of life they constructively hold as they design missions to seek non-terran life. We also look at how constructive beliefs about biosignatures change as observational data accumulate. And we consider how a definition centered on Darwinian evolution might itself be forced to change as supra-Darwinian species emerge, including in our descendents, and consider the chances of our encountering supra-Darwinian species in our exploration of the Cosmos. Last, we ask what chemical structures might support Darwinian evolution universally; these structures might be universal biosignatures.     

Approximate analytical solutions of stability problems for skew plates under combined loading

The known analytical solutions of the linearized stability problems for rectangular hinged plates under the combined loading are generalized to the similar problems for skew plates, the deformation mechanics of which is described by the equations of the classical theory formed in the oblique Cartesian coordinates.     

Experimental study of radial temperature gradient-reducing devices in GTE rotor disks

In this paper, we examine experimentally some devices the principle of action of which is based on using the dynamic pressure of air extracted to engine cooling and which are meant for reducing the radial temperature gradient in GTE rotor disks. We established that the devices equipped with the ejector channels make it possible to accelerate the process of the disk hub heating by hot air suction from the cavity periphery towards the rotor axis of rotation. Using the data of visualization studies, we show the possibility for efficient operation of ejector devices in the conditions of real GTE rotor circumferential velocities.     

Optimization of electrode system for the aircraft time-of-flight ion-marking airspeed and angle of attack sensor

A technique of optimizing the electrode system of the differential recorder for the aircraft time-of-flight ion-marking airspeed and aircraft angle of attack sensor by the criterion of ion-marking recording error variance minimum is considered. The technique is based on analyzing the function of spatial distribution for the ion-marking and recorder electrode interaction field potential and determining a point for which this function reaches the maximum slope. The relations making it possible to synthesize the sensor electrode system by the complex criterion as a ratio of error variance to transformation channel response are obtained.     

A lower bound estimate of the critical load for helicopter main rotor composite blade according to the limit equilibrium theory. The basic steps of an algorithm

The basic steps of an algorithm are given for calculating the parameters of the limiting state of a helicopter main rotor blade. To estimate the static strength, a technique of elastic constants variation is used; it is based on the limit equilibrium theory and enables us to obtain the upper and lower bounds for the critical load simultaneously. An iterative technique is proposed to determine the lower bound of the allowable load on the root section of the composite blade depending on the azimuthal angle of its turn in the helicopter hovering mode.     

Analysis of flow past oscillating cascades by the implicit method to evaluate the cascade aeroelastic stability in viscous flow

A technique of analyzing the flutter initiation in flat plate compressor cascades was developed. The viscous and inviscid flow study was carried out using the COBRA solver based on the modified implicit Godunov method and unsteady implicit method updated for using. The flutter conditions were revealed and the effect of taking into account viscosity, angles of attack and time steps was investigated.     

Determination of the influence of a clearance between the case and blade ends of the semi-open impeller on the centrifugal compressor stage characteristics

The influence of the clearance between the case and blade ends of the semi-open impeller on the centrifugal stage characteristics is considered using the experimental data and numerical calculation results.     

Influence of geometry and operating conditions of a centrifugal compressor stage on the radial gas force

The influence of geometry and operating conditions of the centrifugal compressor stage on the radial gas force is determined on the basis of the theoretical method and calculation program using experimental boundary conditions.