The Lunar Orbiter Laser Altimeter Investigation on the Lunar Reconnaissance Orbiter Mission

The Lunar Orbiter Laser Altimeter (LOLA) is an instrument on the payload of NASA’s Lunar Reconnaissance Orbiter spacecraft (LRO) (Chin et al., in Space Sci. Rev. 129:391–419, 2007). The instrument is designed to measure the shape of the Moon by measuring precisely the range from the spacecraft to the lunar surface, and incorporating precision orbit determination of LRO, referencing surface ranges to the Moon’s center of mass. LOLA has 5 beams and operates at 28 Hz, with a nominal accuracy of 10 cm. Its primary objective is to produce a global geodetic grid for the Moon to which all other observations can be precisely referenced.     

The Modern Near-Surface Martian Climate: A Review of In-situ Meteorological Data from Viking to Curiosity

We analyze the complete set of in-situ meteorological data obtained from the Viking landers in the 1970s to today’s Curiosity rover to review our understanding of the modern near-surface climate of Mars, with focus on the dust, CO₂ and H₂O cycles and their impact on the radiative and thermodynamic conditions near the surface. In particular, we provide values of the highest confidence possible for atmospheric opacity, atmospheric pressure, near-surface air temperature, ground temperature, near-surface wind speed and direction, and near-surface air relative humidity and water vapor content. Then, we study the diurnal, seasonal and interannual variability of these quantities over a span of more than twenty Martian years. Finally, we propose measurements to improve our understanding of the Martian dust and H₂O cycles, and discuss the potential for liquid water formation under Mars’ present day conditions and its implications for future Mars missions. Understanding the modern Martian climate is important to determine if Mars could have the conditions to support life and to prepare for future human exploration.     

Locating the LCROSS Impact Craters

The Lunar CRater Observations and Sensing Satellite (LCROSS) mission impacted a spent Centaur rocket stage into a permanently shadowed region near the lunar south pole. The Sheperding Spacecraft (SSC) separated ～9 hours before impact and performed a small braking maneuver in order to observe the Centaur impact plume, looking for evidence of water and other volatiles, before impacting itself. This paper describes the registration of imagery of the LCROSS impact region from the mid- and near-infrared cameras onboard the SSC, as well as from the Goldstone radar. We compare the Centaur impact features, positively identified in the first two, and with a consistent feature in the third, which are interpreted as a 20 m diameter crater surrounded by a 160 m diameter ejecta region. The images are registered to Lunar Reconnaisance Orbiter (LRO) topographical data which allows determination of the impact location. This location is compared with the impact location derived from ground-based tracking and propagation of the spacecraft’s trajectory and with locations derived from two hybrid imagery/trajectory methods. The four methods give a weighted average Centaur impact location of ?84.6796°, ?48.7093°, with a 1σ uncertainty of 115 m along latitude, and 44 m along longitude, just 146 m from the target impact site. Meanwhile, the trajectory-derived SSC impact location is ?84.719°, ?49.61°, with a 1σ uncertainty of 3 m along the Earth vector and 75 m orthogonal to that, 766 m from the target location and 2.803 km south-west of the Centaur impact. We also detail the Centaur impact angle and SSC instrument pointing errors. Six high-level LCROSS mission requirements are shown to be met by wide margins. We hope that these results facilitate further analyses of the LCROSS experiment data and follow-up observations of the impact region.     

Vague Reference and Approximating Judgments

"Mount Everest" is a vague name. That is (on the account here defended) there are many portions of reality all of which have equal claims to serve as its referent. We propose a new account of such vagueness in terms of a theory of what we shall call granular partitions. We distinguish different kinds of crisp and non-crisp granular partitions and we describe the relations between them, concentrating especially on spatial examples. In addition, we describe the practice whereby subjects use systems of reference grids as a means for tempering the vagueness of their judgments for example when they say that Libya straddles the Equator or that the meeting will take place between 2 and 3pm. We then demonstrate how the theory of reference partitions can yield a natural account of this practice, which is referred to in the literature as 'approximation'.     

Adaptive Interpolated Time-Delay Estimation

An adaptive delay-estimation (ADE) algorithm is proposed for the continuous tracking of time-delay. The method uses an adaptive delay line which is interpolated by a first-order filter. Two delay-line interpolating filters are considered, each having a single coefficient which is estimated in real time. The first implements linear interpolation, and the second interpolates using a first-order allpass filter. Since the ADE algorithm is derived from recursive Gauss-Newton optimization, it can be viewed as a recursive maximum likelihood (RML) algorithm for time-delay estimation.     

Voyager imaging experiment

The overall objective of this experiment is exploratory reconnaissance of Jupiter, Saturn, their satellites, and Saturn's rings. Such reconnaissance, at resolutions and phase angles unobtainable from Earth, can be expected to provide much new data relevant to the atmospheric and/or surface properties of these bodies. The experiment also has the following specific objectives:Observe and characterize the global circulation of the atmospheres of Jupiter and Saturn;Determine the horizontal and vertical structure of the visible clouds and establish their relationship to the belted appearance and dynamical properties of the planetary atmospheres;Determine the vertical structure of high, optically-thin, scattering layers on Jupiter and Saturn;Determine the nature of anomalous features such as the Great Red Spot, South Equatorial Belt disturbances, etc.;Characterize the nature of the colored material in the clouds of Jupiter and Saturn, and identify the nature and sources of chromophores on Io and Titan;Perform comparative geologic studies of many satellites at less than 15-km resolution;Map and characterize the geologic structure of several satellites at high resolution (1 km);Investigate the existence and nature of atmospheres on the satellites;Determine the mass, size, and shape of many of the satellites by direct measurement;Determine the direction of the spin axes and periods of rotation of several satellites, and establish coordinate systems for the larger satellites;Map the radial distribution of material in Saturn's rings at high resolution;Determine the optical scattering properties of the primaries, rings, and satellites at several wavelengths and phase angles;Search for novel physical phenomena, e.g., phenomena associated with the Io flux tube, meteors, aurorae, lightning, or satellite shadows.Team leader.Deputy team leader.     

Modeling of brushless DC generating systems using diakoptics

The mathematical modeling of a brushless DC generator is described, as an illustration of the application of diakoptic techniques to the analysis of small-scale electrical power supply systems. Modeling of the generator and its output rectifier is accomplished using an established matrix technique that accounts for the continuously changing conduction pattern of the diode bridge network. The advantages of using diakoptics are discussed together with the main generator linked to its exciter and to the automatic voltage regulator and permanent magnet generator which are often included in a complete unit. A solution algorithm is presented for this overall arrangement and a comparison is made between theoretical and practical results for a typical 3-stage, 4000-rev/min, 10.3-kW, 28-V unit