Microbial rock inhabitants survive hypervelocity impacts on Mars-like host planets: first phase of lithopanspermia experimentally tested

The scenario of lithopanspermia describes the viable transport of microorganisms via meteorites. To test the first step of lithopanspermia, i.e., the impact ejection from a planet, systematic shock recovery experiments within a pressure range observed in martian meteorites (5-50 GPa) were performed with dry layers of microorganisms (spores of Bacillus subtilis, cells of the endolithic cyanobacterium Chroococcidiopsis, and thalli and ascocarps of the lichen Xanthoria elegans) sandwiched between gabbro discs (martian analogue rock). Actual shock pressures were determined by refractive index measurements and Raman spectroscopy, and shock temperature profiles were calculated. Pressure-effect curves were constructed for survival of B. subtilis spores and Chroococcidiopsis cells from the number of colony-forming units, and for vitality of the photobiont and mycobiont of Xanthoria elegans from confocal laser scanning microscopy after live/dead staining (FUN-I). A vital launch window for the transport of rock-colonizing microorganisms from a Mars-like planet was inferred, which encompasses shock pressures in the range of 5 to about 40 GPa for the bacterial endospores and the lichens, and a more limited shock pressure range for the cyanobacterium (from 5-10 GPa). The results support concepts of viable impact ejections from Mars-like planets and the possibility of reseeding early Earth after asteroid cataclysms.     

Measurement and stability of the pointing of the BepiColombo Laser Altimeter under thermal load

The BepiColombo Laser Altimeter (BELA) has been selected to fly on ESA?s BepiColombo mission to Mercury. The instrument will be the first European laser altimeter designed for interplanetary flight. This paper describes the setup used to characterize the angular movements of BELA under the simulated environmental conditions that the instrument will encounter when orbiting Mercury. The system comprises a laser transmitter and a receiving telescope, which can move with respect to each other under thermal load. Tests performed using the Engineering Qualification Model show that the setup is accurate enough to characterize angular movements of the instrument components to an accuracy of ≈10 μrad. The qualification instrument is thermally stable to operate during all mission phases around Mercury proving that the transmitter and receiver sections will remain within the alignment requirements during its mission.     

Time profile of cosmic radiation exposure during the EXPOSE-E mission: the R3DE instrument

The aim of this paper is to present the time profile of cosmic radiation exposure obtained by the Radiation Risk Radiometer-Dosimeter during the EXPOSE-E mission in the European Technology Exposure Facility on the International Space Station's Columbus module. Another aim is to make the obtained results available to other EXPOSE-E teams for use in their data analysis. Radiation Risk Radiometer-Dosimeter is a low-mass and small-dimension automatic device that measures solar radiation in four channels and cosmic ionizing radiation as well. The main results of the present study include the following: (1) three different radiation sources were detected and quantified-galactic cosmic rays (GCR), energetic protons from the South Atlantic Anomaly (SAA) region of the inner radiation belt, and energetic electrons from the outer radiation belt (ORB); (2) the highest daily averaged absorbed dose rate of 426 μGy d(-1) came from SAA protons; (3) GCR delivered a much smaller daily absorbed dose rate of 91.1 μGy d(-1), and the ORB source delivered only 8.6 μGy d(-1). The analysis of the UV and temperature data is a subject of another article (Schuster et al., 2012 ).     

Construction of lunar DEMs based on reflectance modelling

Existing lunar DEMs obtained based on laser altimetry or photogrammetric image analysis are characterised by high large-scale accuracies while their lateral resolution is strongly limited by noise or interpolation artifacts. In contrast, image-based photometric surface reconstruction approaches reveal small-scale surface detail but become inaccurate on large spatial scales. The framework proposed in this study therefore combines photometric image information of high lateral resolution and DEM data of comparably low lateral resolution in order to obtain DEMs of high lateral resolution which are also accurate on large spatial scales. Our first approach combines an extended photoclinometry scheme and a shape from shading based method. A novel variational surface reconstruction method further increases the lateral resolution of the DEM such that it reaches that of the underlying images. We employ the Hapke IMSA and AMSA reflectance models with two different formulations of the single-particle scattering function, such that the single-scattering albedo of the surface particles and optionally the asymmetry parameter of the single-particle scattering function can be estimated pixel-wise. As our DEM construction methods require co-registered images, an illumination-independent image registration scheme is developed. An evaluation of our framework based on synthetic image data yields an average elevation accuracy of the constructed DEMs of better than 20 m as long as the correct reflectance model is assumed. When comparing our DEMs to LOLA single track data, absolute elevation accuracies around 30 m are obtained for test regions that cover an elevation range of several thousands of metres. The proposed illumination-independent image registration method yields subpixel accuracy even in the presence of 3D perspective distortions. The pixel-wise reflectance parameters estimated simultaneously with the DEM reflect compositional contrasts between different surface units. Specifically, the detected variations of the parameter of the single-particle scattering function indicate small-scale variations of the regolith particle size, possibly as a result of differences in soil maturity.     

Hybrid method for crater detection based on topography reconstruction from optical images and the new LU78287GT catalogue of Lunar impact craters

Impact craters are ubiquitous and well-studied structures of high geological relevance on the surfaces of the Earth’s Moon, the terrestrial planets, the asteroids and the satellites of the outer planets. Therefore, it is not surprising that crater detection algorithms (CDAs) are one of the most studied subjects of image processing and analysis in lunar and planetary science. In this paper we are proposing a Hybrid CDA: a modified DEM (digital elevation map) reconstruction method used as a step in an existing CDA based on Hough transform. The new Hybrid CDA consists of: (1) reconstruction of topography from optical images using a shape from shading approach; (2) utilization of the DEM-based CDA; (3) correction of brightness and contrast of optical images used in order to be more suitable for evaluation of detections. An additional result of this work is a new method for evaluation of topography reconstruction algorithms, using a DEM-based CDA and an earlier approach for evaluation of CDAs. The new Hybrid CDA was tested using two Chandrayaan-1 Moon Mineralogy Mapper (M³) images and two excerpts of the Lunar Reconnaissance Orbiter (LRO) Wide Angle Camera (WAC) global optical image mosaic. As a result, the number of craters inside these four regions increased considerably from 1754 (as available in the previous LU60645GT catalogue) to 19 396 craters (as available in the resulting new LU78287GT catalogue). This confirmed the practical applicability of the new Hybrid CDA, which can be used in order to considerably extend current crater catalogues.     

Elucidation of an iterative process of carbon-carbon bond formation of prebiotic significance

Laboratory experiments carried out under plausible prebiotic conditions (under conditions that might have occurred at primitive deep-sea hydrothermal vents) in water and involving constituents that occur in the vicinity of submarine hydrothermal vents (e.g., CO, H(2)S, NiS) have disclosed an iterative Ni-catalyzed pathway of C-C bond formation. This pathway leads from CO to various organic molecules that comprise, notably, thiols, alkylmono- and disulfides, carboxylic acids, and related thioesters containing up to four carbon atoms. Furthermore, similar experiments with organic compounds containing various functionalities, such as thiols, carboxylic acids, thioesters, and alcohols, gave clues to the mechanisms of this novel synthetic process in which reduced metal species, in particular Ni(0), appear to be the key catalysts. Moreover, the formation of aldehydes (and ketones) as labile intermediates via a hydroformylation-related process proved to be at the core of the chain elongation process. Since this process can potentially lead to organic compounds with any chain length, it could have played a significant role in the prebiotic formation of lipidic amphiphilic molecules such as fatty acids, potential precursors of membrane constituents.     

Modeling of Thermal Perturbations Using Raytracing Method with Preliminary Results for a Test Case Model of the Pioneer 10/11 Radioisotopic Thermal Generators

Electromagnetic radiation emitted from a source carries momentum. Thus, the dissipation of waste thermal energy can produce disturbance forces on spacecraft surfaces if the energy is not dissipated in a symmetric pattern. This force can be computed for a plate element as the quotient of the radiated power in normal direction and the speed of light. Depending on mission and spacecraft design the resulting surface forces have to be included into the disturbance budget. At ZARM an elaborated method for the exact modeling of the disturbances caused by heat radiation was developed which can be used for any satellite mission with high requirements on perturbation knowledge (e.g. LISA, LISA pathfinder, MICROSCOPE). The method which will be presented in this paper is based on raytracing and finite element (FE) thermal analysis. As a demonstration of the potential of the method, preliminary results acquired with a test case model of the Pioneer 10/11 Radioisotopic Thermal Generators (RTGs) will be shown.     

Quasistatic electric field measurements with spherical double probes on the GEOS and ISEE satellites

Spherical double probes for measurements of electric fields on the GEOS-1, GEOS-2, and ISEE-1 satellites are described. An essential feature of these satellites is their conductive surfaces which eliminate errors due to differential charging and enable meaningful diagnostic experiments to be carried out. The result of these experiments is a good understanding of interactions between the plasma, the satellite and the probes, including photo-electron emission on satellite and probes. Electric field measurements are compared with measurements of plasma drift perpendicular to the magnetic field in the solar wind and the magnetosphere and the error bar for the absolute values of the electric field is found to be in the range ±(0.5–1.0) mV m^-1 whereas relative variations can be determined with much better accuracy. A useful by-product from a spherical double probe system is the determination of satellite floating potential which is related to the plasma electron flux. This measurement allows high time resolution studies of boundary crossings. Examples of electric field measurements, which reflect the recent scientific results, are given for different regions of the magnetosphere from the bow shock, the inner magnetosphere and the tail. Several examples of simultaneous GEOS-ISEE observations are described.     

Some aspects of temperature sounding of the atmosphere

Based on measurements with the interferometer spectrometer SI-1 on board of Meteor satellites the following problems are investigated: the systematic effect of the spectral response function in deriving effective radiation temperatures; the selection of ‘optimal’ spectral channels within the 15 μm region, and effects of additional molecular absorbers on the determination of the temperature profile. It can be shown that using broad-band window channels (half width ?20cm^?1) the derived surface temperature is significantly different from the surface temperature derived from narrow spectral band channels (e.g. for the HIRS window channel 8 this difference is about 1° C). Simulations of some combinations of spectral channels including one proposed as an optimal approach show no significant difference in the derived temperature profile. Neglecting the ozone absorption of the 14.1 μm band leads to a change in radiance of about 1.5 mW/m²sr cm^?1 and to a systematic error of the derived temperature of about ?2° C in the troposphere.     

The Evolution of the Anomalous Cosmic Ray Oxygen Spectra From 1995 to 1998: Ulysses Observations

Moraal and Steenberg (1999), showed that the peak energy in the anomalous cosmic ray spectra is independent of the radial distance up to a few AU away from the termination shock but dependent on the solar wind speed, the radius of the termination shock and the scattering strength. In this paper we will discuss the variation of the cosmic ray oxygen energy spectrum as measured by the Ulysses EPAC and the COSPIN/LET on board Ulysses. We found that the peak energy decreased from ∼5 MeV nucl⁻¹, when Ulysses was at high northern heliographic latitudes embedded in the fast solar wind to ∼3.5 MeV n⁻¹, in the streamer belt. The shift towards lower energy might also be caused by changing modulation although Voyager measurements indicate no variation of the ACR Oxygen spectrum at ∼60 AU. This revised version was published online in August 2006 with corrections to the Cover Date.