Ultracapacitors + DC-DC converters in regenerative braking system

An ultracapacitor system for an electric vehicle has been implemented. The device allows higher accelerations and decelerations of the vehicle with minimal loss of energy and minimal degradation of the main battery pack. The system uses a DC-DC power converter, which is connected between the ultracapacitor and the main battery pack. The design has been optimized in weight and size, by using water-cooled heat sinks for the power converter, and an aluminum coil with air core for the smoothing inductance. The ratings of the ultracapacitor are: nominal voltage: 300 Vdc; nominal current: 200 Adc; capacitance: 20 Farads. The amount of energy stored allows us to have 40 kW of power during 20 seconds, which is enough to accelerate the vehicle without the help of the traction batteries. The vehicle uses a brushless DC motor with a nominal power of 32 kW and a peak power of 53 kW. A control system based on a Digital Signal Processor (DSP) manipulates all the aforementioned variables and controls the Pulse Width Modulation (PWM) switching pattern of the converter transistors. The car used for the implementation of this system is a Chevrolet LUV truck.     

Coronal heating by reconnection

The outermost atmosphere of the Sun, called the corona, is some 200 times hotter than the surface of the Sun. The main source of energy for heating the corona is believed to be the magnetic field which dominates the corona. Magnetic reconnection is probably the most important mechanism for releasing magnetic energy and may, therefore, be important for coronal heating or micro-flaring. The best observational examples of reconnection in the corona are thought to be X-ray bright points, which are small-scale brightenings seen randomly throughout the whole corona. Theoretical models can not only explain the key observations relating to bright points, but they can also explain the complex three-dimensional structures often seen in bright points. In these models magnetic neutral points play a significant role as the centres for reconnection both in two and three dimensions.     

Population dynamics of transgenic microorganisms in the different microecosystem conditions.

The role of key environmental factors in adaptation of spore-forming and non-spore-forming transgenic microorganisms (TM) have been studied in model ecosystems. Model TM Escherichia coli Z905 (bearing plasmid genes of bacterial luminescence Ap (r) Lux+) has been found to have a higher adaptation potential than TM Bacillus subtilis 2335/105 (bearing genes of human alpha 2-interferon Km (r) Inf+), planned for employment as a living vaccine under varying environmental conditions. Effects of abiotic factors on migration of natural and recombinant plasmids between microorganisms under model ecosystem conditions has been estimated. The transgenic microorganisms with low copy number survived better under introduction conditions in the microcosms studied. This trend has been shown to be independent of the microcosm type and its complexity. Grant numbers: 99-04-96017, 25, 00-07-9011.     

Radar target identification using the bispectrum: a comparativestudy

Radar target identification is performed using time-domain bispectral features. The classification performance is compared with the performance of other classifiers that use either the impulse response or frequency domain response of the unknown target. The classification algorithms developed here are based on the spectral or the bispectral energy of the received backscatter signal. Classification results are obtained using simulated radar returns derived from measured scattering data from real radar targets. The performance of classifiers in the presence of additive Gaussian (colored or white), exponential noise, and Weibull noise are considered, along with cases where the azimuth position of the target is unknown. Finally, the effect on classification performance of responses horn extraneous point scatterers is investigated     

Ulysses solar wind observations to 56° south

In the 25 months since Jupiter flyby, the Ulysses spacecraft has climbed southward to a heliolatitude of 56°. This transit has been marked by an evolution from slow, dense coronal streamer belt solar wind through two regions where the rotation of the Sun carried Ulysses back and forth between streamer belt and polar coronal hole flows, and finally into a region of essentially continuous fast, low density solar wind from the southern polar coronal hole. Throughout these large changes, the momentum flux normalized to 1 AU displays very little systematic variation. In addition, the bulk properties of the polar coronal hole solar wind are quite similar to those observed in high speed streams in the ecliptic plane at 1 AU. Coronal mass ejections and forward and reverse shocks associated with corotating interaction regions have also been observed at higher heliolatitudes, however they are seen less frequently with increasing southern heliolatitude. Ulysses has thus far collected data from 20° of nearly contiguous solar wind flows from the polar coronal hole. We examine these data for characteristic variations with heliolatitude and find that the bulk properties in general show very little systematic variation across the southern polar coronal hole so far.     

Ultra-wideband ground-penetrating radar for the detection of buriedmetallic mines

The suitability of ultra-wideband ground-penetrating radar as a tool for the detection of buried metallic mines is explored in this paper. The analysis centers around a 200-800 MHz, dual-polarized ground penetrating radar (GPR) designed and built by SRI International. The analysis consisted of fusing the images from the dual polarizations into a single image to enhance the target objects and suppress clutter. Results are shown for several variations of a Mahalanobis-based fusion technique, and “soft decision” minefield detection results based upon Monte Carlo statistical techniques are also presented. Although relatively few scenes were analyzed, these results show that the dual-polarized GPR is potentially very effective at finding buried mines and minefields     

Venus Express: Scientific goals, instrumentation, and scenario of the mission

The first European mission to Venus (Venus Express) is described. It is based on a repeated use of the Mars Express design with minor modifications dictated in the main by more severe thermal environment at Venus. The main scientific task of the mission is global exploration of the Venusian atmosphere, circumplanetary plasma, and the planet surface from an orbiting spacecraft. The Venus Express payload includes seven instruments, five of which are inherited from the missions Mars Express and Rosetta. Two instruments were specially designed for Venus Express. The advantages of Venus Express in comparison with previous missions are in using advanced instrumentation and methods of remote sounding, as well as a spacecraft with a broad spectrum of capabilities of orbital observations.     

The Motion of Coaxial Bodies of Varying Composition on the Active Leg of Descent

The motion of a spacecraft (SC) with double rotation and variable mass on the active leg of its descent is considered. The SC consists of two coaxial bodies. The coaxial scheme is used for gyroscopic stabilization of the SC longitudinal axis by the method of partial spin-up. The equations of spatial motion of coaxial bodies of varying composition are derived and approximate solutions for the angles of spatial orientation are found. The condition of decreasing amplitude of nutation oscillations is obtained, which allows the estimation of efficiency of the stabilization by partial spin-up. The errors in the magnitude and direction of the vector of braking thrust are also determined.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 3, 2005, pp. 224–232.Original Russian Text Copyright © 2005 by Aslanov, Doroshin, Kruglov.