Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

飞轮微振动的组合隔振装置设计及实验研究

针对光学遥感卫星飞轮微振动引起的成像质量下降问题，设计了一种组合隔振装置，并采用仿真分析与实验测试相结合的方法对隔振方案设计的合理性进行验证。首先，将测量的飞轮扰振数据引入光学卫星的有限元模型中，计算出飞轮扰振对光学相机的像素偏移影响；其次，设计了组合隔振方案并基于有限元方法对其隔振效果进行验证；最后，搭建了光学成像微振动实验测试平台，对不同转速下飞轮微振动造成的像素偏移影响进行精确测量。实验结果表明，组合隔振装置对300 Hz以上高频段飞轮扰振有较大衰减作用，最大像素偏移降到0.01个像素以下，隔振效率达到80%以上；通过对比可知，实验测试与仿真计算得到的像素偏移结果在低频段一次谐波响应及模态响应表现出较好一致性，但在高频段二者存在一定偏差。     

流动阻力及能量损失对注射成型制件的影响

本文分析了在塑料熔体充满型腔的过程中，流动阻力及能量损失产生的形式和物理原因，进而讨论了对塑料制件成型及凝固过程中的影响。并提出降低影响的措施。     

进气道喘振诱发因素及其可靠性分析

针对飞机进气道的典型故障-喘振的诱发因素进行全方位的分析论证，并为从事航空工程的人员提供一种对动力装置整体性能进行可靠性评估方案，篇末对世界上比较先进的进气道气动设计思想及其喘振机理进行分析，可以为飞机设计师在设计飞机过程中具体分析问题提供一定的参考。     

专科英语、本科英语及成人专科英语的定位和相互关系

专科英语在理论上被界定为专门用途英语(ESP)分支下,介于学术英语(EAP)与职业英语(EOP)之间的业务用途英语(EPP)。而本科(大学)英语在理论体系上属于普通英语(GE)。本文从ESP理论的角度探讨了专科英语,本科英语及成人专科英语的定位和相互关系。     

平面形状误差分离方法的比较分析

就十种典型的精密平面形状误差测量－分离方法的权函数及其零点，作了分析比较。按形状误差谐波抑制最小准则，论证了五点式正交逐次三点法、九点式正交逐次三点法、复合三点法、不对称二维混合法和不对称四点法优于其他方法，不对称四点法则较为理想。     

Active damping control of vibrational systems

The problem of vibration suppression in large flexible space structure (LFSS) is investigated. Based on the structure property of LFSS, an active damping strategy is proposed to effectively attenuate the critical vibrations of the structure subject to modeling uncertainty and external disturbance. Control algorithms are derived with the aim of suppressing both the vibrating magnitude and vibrating rate to an acceptable level. It is shown that the strategy exhibits robust and adaptive properties and is truly model-independent. The novelty of the proposed approach lies in the fact that it is fairly easy to set up the strategy and the overall computation involved is much less than any other strategies available to date. A two-bay truss is used to verify the validity of the proposed approach     

基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。