TiC和ZrC颗粒增强钨基复合材料

用粉末冶金热压法制备了ＴｉＣｐ／Ｗ和ＺｒＣｐ／Ｗ两种钨基复合材料，对其高温强度进行了研究，结果表明，随着温度提高，两种复合材料的抗弯强度开始时逐渐提高，当ＴｉＣｐ／Ｗ复合材料达到１０００℃时有最大值１１５５ＭＰａ，ＺｒＣｐ／Ｗ复合材料在８００℃时最大值８２９ＭＰａ，分别比各自的室温强度提高５７％和１７％。而后，随温度的进一步提高，复合材料的强度又下降，分析了复合材料高温增强的机理。     

蜡纸存贮法在高超声速脉冲风洞舵-锥干扰流场显示中的应用

简述了蜡纸存贮法在高超声速脉冲风洞锥—舵干扰流场显示中的应用，给出了迎风面内舵周围干扰区立体和平面展开两种油流谱图，揭示了其三维干扰流动的特征。     

线圈法漏磁探伤的信号特性分析

本文由标量磁位计算圆柱形点缺陷的漏磁场，然后计算穿过式线圈及旋转式线圈探测点缺陷的漏磁场产生的感应电动势，分析这些检测信号的特性并得出相应的结论。     

过氧化氢／煤油发动机推力室气液燃烧数值模拟

采用离散相模拟颗粒随机轨道方法处理两相流动,采用SST后刊湍流模型,利用燃料的单步总反应模型模拟煤油蒸汽燃烧,针对过氧化氢／煤油发动机推力室,进行三维两相燃烧数值模拟。对推力室的总体流场特征及性能进行了初步研究,为开展进一步的数值研究奠定基础。     

Airfoil Aeroelastic Flutter Analysis Based on Modified Leishman-Beddoes Model at Low Mach Number

Based on modified Leishman-Beddoes (L-B) state space model at low Mach number (lower than 0.3), the airfoil aeroelastic system is presented in this paper. The main modifications for L-B model include a new dynamic stall criterion and revisions of normal force and pitching moment coefficient. The bifurcation diagrams, the limit cycle oscillation (LCO) phase plane plots and the time domain response figures are applied to investigating the stall flutter bifurcation behavior of airfoil aeroelastic systems with symmetry or asymmetry. It is shown that the symmetric periodical oscillation happens after subcritical bifurcation caused by dynamic stall, and the asymmetric periodical oscillation, which is caused by the interaction of dynamic stall and static divergence, only happens in the airfoil aeroelastic system with asymmetry. Validations of the modified L-B model and the airfoil aeroelastic system are presented with the experimental airload data of NACA0012 and OA207 and experimental stall flutter data of NACA0012 respectively. Results demonstrate that the airfoil aeroelastic system presented in this paper is effective and accurate, which can be applied to the investigation of airfoil stall flutter at low Mach number.     

Cf / E 预浸料先进拉挤固化工艺

为探索与预浸料先进拉挤成型技术相适应的工艺方案,采用DSC研究了碳纤维/环氧预浸料USN12500的固化放热过程,对USN 12500的典型固化工艺进行改进,以此为基础设计了不同压力和加压时机下的试验方案,采用实验室现有设备模拟先进拉挤过程制备了试样,以制品的孔隙率作为考察指标优选了的拉挤成型固化的工艺参数.结果表明:制品在110℃下处理20 min,热压阶段130℃下处理15 min同时保持0.4MPa的工艺压力,后固化150℃下处理1.5h为工艺试验的优化方案,并且能够制得孔隙率＜1.1％的制品.     

Stability analysis of explicit guidance laws for space launch vehicles with varying thrust integrals

In this study, a stability analysis of the explicit guidance laws for space launch vehicles is performed with consideration of varying thrust integrals. Among various forms of explicit guidance, linear tangent guidance in its general form is selected and six different acceleration profiles are considered for this numerical experiment. A linear system modeling which includes all of the significant dynamic elements of a space launcher is performed to analyze the effect of the characteristics of thrust integrals on stability margins. Numerical results show that in an aspect of guidance stability, it is advantageous to have thrust integrals derived from increasing acceleration profiles, such as constant thrust case, which may be considered in the development of propulsion systems. Finally, time-domain simulation with the original nonlinear models is performed to verify the approach and the result shows that the nonlinear dynamics of the system is conserved well in the linear model.     

产品数字化设计中的标准化工作

介绍洪都集团在产品数字化设计中开展基础标准化工作情况,说明基础标准化工作的重要性,提出了今后标准化工作目标。     

CLOS+IRTH composite guidance

A composite guidance scheme based on the command to line-of-sight (CLOS)+infrared terminal homing (IRTH) for a short-range surface-to-air missile system is proposed in an attempt to complement drawbacks of a single guidance law. Launch boundaries for a successful guidance handover are analyzed according to missile maneuverability and seeker gimbal angle limits. This paper also concentrates on developing practical guidance laws for the IRTH phase in the presence of inherent missile heading errors at the time of guidance handover and missile deceleration due to aerodynamic drag.     

巡航导弹主动红外对抗技术研究

在现代战争条件下,精确制导武器巡航导弹已成为打击敌方战略目标的重要手段,同时也是敌对防空系统重点拦截的对象。提高巡航导弹的生存机率和作战有效性,需要提高巡航导弹有效的突防能力。对巡航导弹的各种威胁因素进行分析,确定巡航导弹的主要威胁来自红外制导导弹。提出了弹载突防主动红外对抗技术,对开展该技术研究涉及的关键技术进行了分析、研究。