难加工材料闭式整体构件精密电火花加工技术研究

闭式整体构件因其结构复杂、叶间流道空间弯扭程度大,使得加工可达性极差,且材料一般为难加工的高强度合金,整体制造难度很大。针对这一制造难题,研究了闭式整体构件电火花加工的若干关键技术,如叶间流道加工区域划分、成形电极及其加工运动轨迹设计、工艺基准统一和电参数选择与优化、数控电火花加工过程仿真分析等。在此基础上针对典型闭式整体构件进行了试制加工。试验结果表明,基于所研究的关键技术能够采用数控电火花加工技术精密、可靠地实现闭式整体构件的整体制造。     

基于马尔科夫链模型的脉动装配线运行状态预测

分析了影响脉动生产线运行的因素和状态预测的必要性,提出了基于马尔科夫链模型的状态预测方法。基于马尔科夫链预测理论,对脉动生产线运行状态划分,确定状态转移矩阵,建立马尔科夫预测模型,并对模型准确性进行验证。     

复合材料加筋壁板制造成本的快速估算模型

为了能够在设计阶段早期对复合材料加筋壁板制造成本进行快速估算,提出了一种以结构设计重量为主要驱动因素的制造成本估算模型。该模型的关键是考虑了诸如材料成本比重系数、制造工艺系数、蒙皮形状系数、筋条形状系数、材料利用率系数等合理取值。以某验证试验的试验件制造成本估算为例,估算成本与实际制造成本的偏差为10.8%,说明了采用该方法对复合材料加筋壁板制造成本进行快速估算的结果是可以为设计人员提供决策依据的。     

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80°S-80°N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Spherical accretion of massive black holes: A model for galactic nuclei

The possibility of explaining the continuous emission of active galactic nuclei in the frame of a model of spherical accretion onto a massive black hole is discussed. Cool inhomogeneities (T 10⁴°K) within the accretion flow could be responsible for the broad line emission if half of the accreting matter is in the dense phase. A crucial test of this hypothesis is the expected correlation between the ratio of the luminosity in lines to the total luminosity and the hardness of the continuous spectrum.     

Solar maximum mission experiment: Ultraviolet spectroscopy and polarimetry on the solar maximum mission

We describe the Ultraviolet Spectrometer and Polarimeter (UVSP) on the Solar Maximum Mission (SMM) spacecraft. The instrument, which operates in the wavelength range 1150 – 3600 Å, has a spatial resolution of 2–3 arc sec and a spectral resolution of 0.02 Å FWHM in second order. A Gregorian telescope, focal length 1.8 m, feeds a 1 m Ebert-Fastie spectrometer. A polarimeter comprising rotating Mg F₂ waveplates can be inserted behind the spectrometer entrance slit and allows all four Stokes parameters to be determined. The observing modes include rasters, spectral scans, velocity measurements, and polarimetry. Finally, we present examples of initial observations made since launch.     

Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

Hard X-ray observations of the Crab Pulsar

The Crab was observed in a balloon flight from Palestine/Texas on 9/28/81 at hard X-ray energies (20–200 keV). The light curve is significantly sharper than reported previously for this energy range. The pulse-averaged as well as the interpulse spectra show breaks in our energy-range. The variation of spectral index across the pulse has an amplitude similar to that found at lower energies by OSO-8 and larger than reported by HEAO-1 A4 at hard X-rays. For a sharp emission line at 77 keV a 99% upper limit of 1.0*10⁻³ photons/ cm² sec can be placed, a factor of 4 lower than line fluxes reported previously. Pulse-shape fits to the optical, X-ray, hard X-ray and gamma ray light-curves reveal a consistent picture of the origin of the interpulse and off-pulse emission, the breaks in the spectra and the variation of spectral index, providing arguments against a thermal component and also a polar cap emission model for NP0532.     

The 2.5 to 5 microns spectrum of comet Halley from the IKS instrument of Vega

Results of the 2.5–5 micron spectroscopic channel of the IKS instrument on Vega are reported and the data reduction process is described. H₂O and CO₂ molecules have been detected with production rates of 10³⁰ s⁻¹ and 1.5 10²⁸ s⁻¹ respectively. Emission features between 3.3 and 3.7 microns are tentatively attributed to CH - bearing compounds - CO is marginally detected with a mixing ratio CO/H₂O 0.2. OH emission and H₂O - ice absorption might also be present in the spectra.