分布式航天器相对位置测量平台设计

分布式航天器间相对位置的实时高精度测量是分布式航天器实现空间队形保持的关键技术之一。为了对相对位置测量方法进行研究、分析和论证,建立了分布式航天器相对位置测量地面实验平台。介绍了分布式航天器相对位置测量和解算的基本原理;论述了仿真平台的组成和功能;基于仿真平台对相对位置测量精度进行了仿真试验,试验结果显示该平台具有良好的性能指标;最后介绍了相对位置解算仿真评估软件的设计方法。     

电大目标等离子体隐身的矩量法优化设计

根据高频散射特征,提出典型几何散射中心替代法,用于解决矩量法（MOM）用于电大目标等离子体隐身时的优化设计问题。以某典型电大目标为例,通过仿真分析了该方法的可行性。结果显示,电大目标覆盖利用该方法得到最优参数的等离子体后,不仅目标整体的单站RCS平均缩减与典型几何散射体的单站RCS缩减相当,且任意方向上RCS基本都有10dB左右的缩减,表明用该方法得到用于电大目标隐身的等离子体参数是可行的。     

乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

光学基片表面软质抛光胶体粒子的激光清洗

介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.     

Responses of ionospheric foF2 to geomagnetic activities in Hainan

Responses of low-latitude ionospheric critical frequency of F2 layer to geomagnetic activities in different seasons and under different levels of solar activity are investigated by analyzing the ionospheric foF2 data from DPS-4 Digisonde in Hainan Observatory during 2002–2005. The results are as follows: (1) the response of foF2 to geomagnetic activity in Hainan shows obvious diurnal variation except for the summer in low solar activity period. Generally, geomagnetic activity will cause foF2 to increase at daytime and decrease at nighttime. The intensity of response of foF2 is stronger at nighttime than that at daytime; (2) seasonal dependence of the response of foF2 to geomagnetic activity is very obvious. The negative ionospheric storm effect is the strongest in summer and the positive ionospheric storm effect is the strongest in winter; (3) the solar cycle has important effect on the response of foF2 to geomagnetic activity in Hainan. In high solar activity period, the diurnal variation of the response of foF2 is very pronounced in each season, and the strong ionospheric response can last several days. In low solar activity period, ionospheric response has very pronounced diurnal variation in winter only; (4) the local time of geomagnetic activities occurring also has important effect on the responses of foF2 in Hainan. Generally, geomagnetic activities occurred at nighttime can cause stronger and longer responses of foF2 in Hainan.     

System of simulation training for unmanned aircraft

For proficiently operating an unmanned aircraft, the aircrew must be thoroughly trained. However, using practical equipment to train the aircrew is work of high cost and risk. In this paper, a system of simulation training for unmanned aircraft is introduced. Its function and composition are explained in detail. In practice, the system not only decreases training cost and risk, but also strengthens training effectiveness and diversity     

一类基于四面体组合单元的模块化构架式可展开天线机构

针对现有基于四面体单元的构架式天线机构结构复杂、收拢率低、运动副数量多等问题，基于3RR-3RRR四面体组合单元和基于3RR-3URU四面体对称组合单元分别提出了两种新型模块化可展结构。以3个组合单元组成的模块化结构为分析对象，首先，详细介绍了模块化结构的组成及虎克铰轴线布置，并利用组合单元本身的自由度数目及性质，采用拆杆-等效-复原的思想，应用螺旋理论和G-K公式分别对提出的两种模块化结构进行了自由度分析，得到了自由度数目及性质。其次，应用Adams动力学仿真软件对两种模块化结构进行运动仿真，仿真结果验证了自由度分析的正确性。以完全展开和完全收拢时机构所占的空间体积比值表征该机构的收拢率，计算现有基于四面体单元的非模块化机构与提出的模块化机构的收拢率。最后，对比分析非模块化机构与模块化机构的自由度数目、运动副数目及收拢率。分析结果表明，基于3RR-3URU四面体对称组合单元的模块化结构既能实现较大收拢率，自由度及运动副数目也相对减少，且组成大型天线时杆件类型较少。研究结果为该类模块化构架式可展天线结构的设计与分析提供一定理论依据。     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

民用航空器研制中制造符合性声明的使用

制造符合性声明是申请人签署后,提交局方进行制造符合性检查的重要文件。在型号研制阶段,申请人签署制造符合性声明,向局方表明符合设计资料,局方进行检查并确定是否安全可用;在依据型号合格证进行生产阶段,申请人签署制造符合性声明,向局方表明符合设计资料并处于安全可用状态,局方进行检查得到确认后签发适航批准证书;在获得生产批准后,申请人无需提交制造符合性声明,即可获得局方签发的适航批准证书。通过对中国民用航空局、美国联邦航空局和欧洲航空安全局适航规章的要求进行比较,对制造符合性声明在不同阶段的作用进行研究和探讨。     

低碳硅锰系结构钢中相变诱发塑性的研究

在低碳硅锰系结构钢中，也可获得ＴＲＩＰ效应，使其力学性能尤其是延伸率大幅度提高。本研究硅含量较高的Ｂ钢残余奥氏体稳定性增强，ＴＲＩＰ效应显著。