定速拉伸的固体推进剂双轴板条的应力分析

对固体推进剂双轴板条试件进行了有限元分析，并考虑了粘弹性对应力结果的影响，分析结果表明，双轴板条试件中心域为平面应变状态，与发动机药柱中部内孔表面相似，并给出了计算杨氏模量所需的修正系数。     

刚弹性复杂系统在重力场中的定点转动

本文研究了轴对称刚－弹系统在重力场中的定点运动。首先利用模态分析方法将偏微分方程转化为常微分方程组，然后引进小参数将藕合的长周期运动和短周期运动分离。得到了这个非线性刚弹藉合系统的一次近似解，并利用它研究了刚－弹系统运动特性。     

固体火箭发动机点火过程内流场的二维预示

本文对固体火箭发动机点火过程的内场流进行了二维无粘非定常分析，计算得到了该阶段燃烧室中压强，温度和速度的分布。本文还提出了以近似预示复杂三维装药发动机内流场的有效积法。     

基于MATLAB的现代优化算法在飞行器气动外形设计中的应用

本文发展了MATLAB语言环境下的现代优化算法，包括遗传算法、模拟退火算法和基于分支联赛选择的多目标遗传算法，并用来求解高超声速飞行器气动外形参数优化问题。所研究的气动外形为带控制舵飞行器和可变弯体飞行器。在MATLAB环境下，求解了最大化升阻比的单目标优化问题和具体有两个冲突目标（最小化铰链力矩并且最大化平均操纵效率）的多目标优化问题。实际算例表明，在快速有效的气动力分析方法辅助之下，本文所发展的MATLAB现代优化算法可以在飞行器初始设计中发挥作用。本文所提供的现代优化算法是对MATLAB优化工具箱的一个有益的扩展。     

一类单通道信号的时频分析

根据循环平稳信号分析理论，对一类单通道信号进行了时频分析，并在此基础上提出了利用该信号在不同时段功率差值提取目标位置的方法，其最大优点在于可以固定中频带宽，从而省去滤波器组，同时具有精度高、抗噪声性能强的特点。仿真结果表明，采用功率检波法得到的结果与理论值是吻合的。     

微重力环境中重力梯度加速度引起的流体晃动力和力矩的模拟

本文研究了关于旋转轴在贮箱的非对称轴上且远离贮箱的几何中心情况下，流体在微重力环境中由重力梯度加速度诱发的晃动特性。我们以精密Ｘ光光谱天文物理实验卫星（简称ＡＸＡＦ－Ｓ）作为研究对象，获得了由于旋转运动引起的重力梯度加速度的数学表达式。关于晃动问题的数值计算是用与卫星固连的非惯性坐标系为基础，目的是寻求一种较为易处理且适合于流体力学方程的边界和初始条件。通过数值计算获得了流体作用于卫星贮箱上的力和力矩。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

自适应控制方法的直接命中目标本体的平行接近制导律

本文在最少量测条件下采用视线角速度ｑ趋于零的指标函数和低阶等效辨识模型与快速自适应控制方法实现了战术导弹的平行接近制导律。这种最优制导律可以实现直接命中目标本体，实现一弹多用，可以用于反导弹的控制。能使制导装置简化并使其尺寸和重量减小，算法简单易于工程使用。经过大量数学和半实物仿真试验表明，上述成果可应用于实际工程当中。