超临界CO2技术对空心/实心石英混编纤维表面改性

采用热处理+溶剂浸洗+超临界CO2技术对空心/实心石英混编纤维表面进行预处理,同时利用超临界流体的携带与渗透作用,将KH-560偶联剂引入纤维表面进行改性。采用接触角测试、表/界面张力测试、树脂吸附量测试、力学性能测试、扫描电镜等分别测试纤维表面能、胶液表面张力与接触角、胶液与纤维浸润性,观察纤维表面形貌结构,分析复合材料的力学与介电性能。结果表明:采用热处理+溶剂浸洗+超临界CO2技术可有效去除空心/实心石英混编纤维表面浸润剂,提高纤维表面能,促进胶液与纤维的完全浸润,最终改善复合材料力学与介电性能。     

民用飞机燃油箱系统闪电防护分析方法研究

民机燃油箱系统的闪电防护是燃油箱安全的重要研究范畴,本文依据FAA的25-146号修正案和咨询通告AC25.954-1,介绍了民用飞机燃油箱系统闪电防护分析方法。在点火源防护分析思路的基础上,针对闪电引起的点火源,在明确飞机闪电分区后,可通过容错类设计或非容错类设计分别开展分析。针对容错类设计,可仅通过证明防护设计特征有效且可靠来表明符合性,无需进一步分析失效概率。针对非容错类设计,通过定性和定量分析法进行评估。在定性分析时,需评估非容错特征失效且引起点火源的概率小于1E-5。在定量分析中,可结合燃油箱可燃性、关键闪电和防护特征失效概率确保闪电引起燃油蒸气点燃的概率为极不可能。同时,根据闪电环境定义的电流振幅和波形对防护设计特征进行有效性验证。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

干涉配合构件的应力腐蚀开裂特性

采用恒载荷拉伸实验技术,研究了镀锌３０ＧｒＭｎＳｉＡ锡螺栓干涉配合连接ＬＹ１２－ＣＺ铝合金构件在３．５％ＮａＣａｌ＋０．５％Ｈ２Ｏ２溶液中的应力腐蚀开裂特性。结果表明,随干涉量的增加,应力腐蚀敏感性有所下降,基材与紧固件的电偶效应对应力腐蚀繁感性有重大影响。     

RNSS/INS深耦合高动态导航接收机测试方法研究CSCD

卫星导航和惯性导航采用深耦合方式实现导航作为世界上最先进的导航形式,在国防中的应用越来越广泛,但其在高动态下的性能需要验证。当前针对深耦合高动态下导航接收机的测试研究较少,本文介绍了基于卫星信号模拟器的测试系统组成及测试用高动态场景,运用模拟测试原理,通过对导航接收机在高动态下定位速度和跟踪灵敏度的测试及其结果分析,验证了导航接收机的深耦合功能,对此类接收机的测试方法进行了初步探究。     

Parylene真空涂覆新工艺研究

简述了Parylene真空沉积的机理,并对采用Parylene真空涂覆的涂层样件进行了全面的性能摸底试验。     

飞机非线性飞行载荷计算方法研究

 以贯彻《军用飞机强度和刚度规范》为目标,提出了一整套使用风洞实验非线性气动力数据进行飞机飞行载荷计算的方法,成功地研制了带有载荷数据库的计算分析软件。该软件已成功地运用于 F××飞机的飞行载荷计算。     

规范疲劳寿命及其标准差

从理论上严格证明了服从对数正态分布的试验寿命的样本标准差服从S分布,给出了母体标准差的无偏估计公式及纠偏系数表。给出了一定置信度下试验寿命安全标准差的计算公式及计算所必须的表格。提出了规范疲劳寿命的概念,它的标准差是试验寿命标准差的加权平均值。     

GH36合金在疲劳和蠕变交互作用下的失效寿命

一、前言 航空发动机是在起动-运行-停车的循环状态下工作的,这种循环使其热端部件受到了两种损伤,即由于起动-停车的循环变形而引起的疲劳损伤和在运行过程中,由于持续峰值载荷的作用而引起的蠕变损伤,与单纯疲劳相比,这种疲劳和蠕变交互作用将显著降低构件的寿命。对此,业已提出许多寿命估算方法,其中,虽有些方法较简单,便于工程计算,但其应用还有一定的局限性,而且对交互作用的微观机制尚缺乏深入的研究。