Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

八丝热线探针制作及其应用

介绍了八丝热线探针的制作工艺,有效地消除了各热丝探头之间的电信号干扰和动力学干扰。实验中使用该探针检测到了湍流边界层内的大尺度旋涡,并测量了它们的强度和尺度。与此同时还获得了速度、湍流强度和功率谱等流场参数,结果与现有典型数据一致。说明本文所述的多丝热线探针具有很强的实用性。     

从典型微机遥测站看遥测技术的发展

分析国外典型微机遥测站的技术特点后 ,认为微机遥测站的核心是利用微软公司的商品化软件 ,应全面考虑发展遥测系统软件。我国发展微机遥测技术时 ,应把注意力放在软件上。     

中山植物园植物定植图微机显示与管理系统

首先指出利用微机管理植物园取代落后的手工管理的意义。进而介绍了植物定植图微机显示与管理系统的具体实现途径，并描述了能将地图（含充色地图）、植物、宇符等录入。绘出，以及对植物进行检索显示等主要功能。     

均布压力作用各向异性矩形薄板大挠度问题

基于冯·卡门模型，选择中心挠度为摄动参数，利用摄动方法将正交异性矩形薄板大挠问题的非线性偏微分方程组逐级线性化，导出了各级摄动对应的几个线性偏微分方程组，然后再借助变分法求解，得到了均布载荷作用下正交异性矩形薄板的载荷-挠度曲线。     

航天飞机再入大气层三维机动飞行的最大过载和热流峰值

本文研究了航天飞机再入大气层三维机动飞行时所产生的最大过载及驻点的热流峰值,提出了一种计算最大过载及热流峰值的解析方法。在一阶近似运动方程的基础上,建立了最大过载、热流峰值与航天飞机的升阻比、再入角、滚转角等参数之间的解析关系式,由之可简便地确定最大过载与热流峰值。文中分析了升阻比、再入角等参数对过载和热流的影响,并与再入三维轨道精确解的相应值作了对比,表明此种解法具有一定的精度,可供再入三维轨道特性的分析及航天飞机的初步设计阶段使用。     

正态分布可靠寿命经典近似限的改进

本文给出了正态分布可靠寿命的又一个经典近似下限，经验证，本文所给出的结果的精度比已有的结果精度要高，可提供给可靠性工程人员使用。     

一类统一的零(低)相关序列构造方法

基于自相关理想序列和正交矩阵建立一类统一的具有零(低)相关区的扩频序列构造方法,并对其相关特性进行分析和证明。该类方法可通过序列和矩阵的任意选取,统一地构造二元、三元、多相、复数的ZCZ(LCZ)序列集,且构造简单、形式统一,通用性更好,适用于准同步CDMA(QS-CDMA)系统。     

局部模型跟踪控制理论的应用研究

将文献［１］中的局部模型跟踪变结构理论用于导弹控制系统设计，探索了一条设计控制系统的新路。某型号导弹控制系统设计中采用了本文提出的参数选择法，获得了良好的仿真结果。