灌封用硫化硅橡胶空间适用性分析

针对航天器灌封用硫化硅橡胶,研究了其在γ射线辐照前后电学性能及力学性能的变化规律,揭示了引起性能变化的内部状态的变化及性能变化机理,同时也研究了其在空间站和载人舱中应用时的阻燃特性、逸出有害气体情况、抗菌防霉性能。结果表明,总剂量辐照后硫化硅橡胶的红外特征峰峰位和峰强基本上未产生变化,热分解行为也无变化,但绝缘性能增强,力学性能随着剂量的提升先增强后衰减,硬度不断增大然后趋于稳定,阐述了出现这些现象的原因。在载人舱中应用时应注意垂直燃烧特性及对部分细菌的抗菌性能。研究成果可为硫化硅橡胶在航天器中的使用提供参考和指导。     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

航空CAE品牌调查报告

计算机辅助工程(CAE)是用计算机对工程结构与产品的性能及其生产加工过程,进行分析、模拟、预测、评价、优化,是工业装备和产品创新设计的核心技术,也是国防和军工装备研制的战略技术.经过几十年的发展,CAE技术在航空、航天、机械、汽车、船舶等领域获得成功应用,已成为制造业信息化深化应用的关键技术.     

浅谈超声衍射时差法(TOFD)检测技术

介绍了TOFD的基本原理、系统参数的设置、缺陷定性定量分析以及TOFD的优点和局限性,为TOFD检测技术的应用、推广提供参考.     

TC11合金高温变形行为及其机理

采用Gleeble-1500热模拟机研究了TC11合金在800～1 050℃、应变速率0.005～5/s条件下的高温变形行为.根据动力学分析,确定了不同温度区间的热激活能和热变形方程.结合变形微观组织观察确定了TC11合金的高温变形机制.结果显示:TC11合金在(α β)两相区和β相区的热变形激活能分别为285.38和141.98 kJ/mol,表明不同温度区间的热变形机理不同;在两相区变形主要发生片状组织的球化,在β相区变形时低应变速率下(0.005～0.05/s)主要发生β相的动态再结晶,高应变速率下(0.05～5/s)主要发生动态回复.研究结果为确定该合金的最佳变形工艺参数提供了理论依据.     

利用多普勒原理测量微机电系统中微结构的动态特性

介绍了将显微扫描激光多普勒测振仪与基础激振法相结合的微结构动态特性的非接触无损测量方法、扫描激光多普勒测振仪的工作原理、设计的基础激振器及其驱动信号.并给出典型微结构--微悬臂梁的测量结果.测量结果与理论计算及有限元仿真结果相符,验证了该方法的有效性.     

不同载荷方式下MDYB-3有机玻璃的变形与破坏行为

 为了理解和评价MDYB-3定向有机玻璃的力学行为,采用CSS44100电子万能试验机,分离式Hopkinson技术和MTS液压伺服试验机分别进行了5种不同类型的力学试验。这些试验包括力学各向异性试验、穿孔试验、应变率从0.001 s^-1到 2 000 s^-1和初始温度从218 K 到 373 K的单轴拉、压试验、等幅应力控制下不同应力集中系数的双边缺口试样疲劳试验。同时采用光学显微镜对变形试样的破坏和断裂进行了观察和分析。结果表明：①MDYB-3定向有机玻璃呈现明显的各向异性性能;②沿板面法线方向MDYB-3定向有机玻璃具有更高的硬度和强度,在穿孔或冲击条件下它以脆性分层破裂和散落为破坏形式;③MDYB-3定向有机玻璃的力学响应强烈地依赖于应变率和温度,且在拉伸和压缩加载下表现出很大的强度非对称性;④双边带有缺口试样的S-N曲线表明,最大应力幅值较低时,MDYB-3定向有机玻璃的疲劳寿命对缺口不敏感。在循环载荷下裂纹起源与微层特性及层间强度有关,它起源于层间可处在缺口中段部位,最后文中对变形与破坏机理也进行了分析和讨论。     

镀金属碳毡在电磁屏蔽材料中的应用

将三维网络结构的碳毡引入电磁屏蔽材料的应用,对其特有的电磁性能及网络结构作了分析,并进行了复合材料屏蔽效果计算和修正。研究表明：利用碳毡的孔洞结构和尺寸,辅之以金属镀层,能在较宽的频率内对电磁波有良好的屏蔽效率,且不需要很大的填充量。     

金属粉末熔化快速成型技术的研究进展

SLM技术代表了快速制造领域的发展方向,运用该技术能直接成型复杂结构、高尺寸精度、高表面质量的致密金属零件,减少制造金属零件的工艺过程,为产品的设计、生产提供更加快捷的途径,进而加快产品的市场响应速度,更新产品的设计理念和生产周期.SLM技术在未来将会得到更好、更快的发展.     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.