多飞行器测控技术的研究

提出了一种基于DBF和DMF-CDMA技术的多飞行器测控系统。首先描述了系统的工作原理，然后对DBF给出了全面和详细的计算机仿真，包括圆面阵DBF阵因子方向图仿真和DBF对多飞行器的搜索与跟踪仿真。最后对DMF-CDMA给出了实验结果。实验的硬软件巳达到实用水平。这些说明本文提出的多飞行器测控方案是可行的。     

基于VRML的航天模拟训练系统

使用虚拟现实建模语言（VRML）建立一个航天地面设备仿真实验和导弹弹体虚拟装配的模拟训练系统，操作者可使用浏览器通过网络进行交互式的虚拟实验和弹体装配，实现航天工程中部分高成本，高代价的实物操作训练功能，该系统具有较好的真实效果，显示了虚拟现实技术在航天工程中的广阔应用前景。     

遗传算法在阵列天线方向图综合中的应用

应用遗传算法对一八单元阵列天线激励幅度和相位进行优化,成功地填充了阵因子方向图一侧0~30°范围内零点,同时将另一侧副瓣压低至-20dB以下。在此基础上编制了一通用程序,在优化变量中引入单元间距,可进行任意形状方向图的综合,取得了良好的效果。     

方位向非均匀采样对多通道天线星载SAR成像性能的影响

方位向周期性非均匀采样是多通道天线星载SAR系统设计时需要考虑的一个重要因素。针对多通道天线星载SAR系统中存在的方位向周期性非均匀采样对成像性能的影响进行了分析。在建立多通道天线星载SAR回波信号模型的基础上,根据成对回波理论和匹配滤波原理推导了由方位向周期性非均匀采样所造成的虚假目标位置与强度的计算公式,并结合成像处理过程分析了二维成像处理算法对虚假目标的影响,给出了二维成像处理后所得到的虚假目标强度计算公式。最后,通过计算机仿真验证推导与分析的正确性。     

考虑探测构形的多飞行器协同探测与制导一体化设计

针对多飞行器协同拦截机动目标时几何构形会影响协同探测和制导效果的问题,基于最优控制理论提出一种考虑探测构形的协同探测与制导一体化设计方法。基于飞行器相对运动学、动力学方程和双视线协同探测原理,建立了协同拦截模型。在制导设计中引入视线分离角参量以调制协同探测几何构形、减小相对距离探测误差,从而在制导全程增强协同探测效果。将相对距离协同探测结果应用到剩余时间和制导律解算中,基于最优控制理论实现协同探测与制导环节一体化设计。仿真结果表明：在目标进行不同程度机动的情况下,与修正比例导引律相比,所提方法在协同探测和制导方面均具有明显优势。     

基于深度学习的毫米波和亚毫米波成像仪的图像增强技术

风云四号卫星毫米波和亚毫米波成像仪(MMSI)数据根据采样方式分为过采样和非过采样数据。由于采样方式的影响,非过采样数据在采样过程中会有一定的信息损失。为解决采用简单的线性插值方法做精细化处理时提升精度有限问题,采用基于深度学习的方法增强MMSI亮温图像,设计卷积神经网络重建风云四号卫星MMSI的亮温图像和风云三号卫星微波成像仪亮温图像。实验结果显示:相比传统的双三次插值方法,在风云三号卫星微波成像仪亮温图像样本上峰值信噪比提升了1.13dB,结构相似度提升了0.01。实验结果表明:对于非过采样亮温数据,采用基于深度学习的方法增强图像具有更高的精度,同时可在其他微波探测仪数据中使用,具有很强的普适性。     

乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

光学基片表面软质抛光胶体粒子的激光清洗

介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.     

Responses of ionospheric foF2 to geomagnetic activities in Hainan

Responses of low-latitude ionospheric critical frequency of F2 layer to geomagnetic activities in different seasons and under different levels of solar activity are investigated by analyzing the ionospheric foF2 data from DPS-4 Digisonde in Hainan Observatory during 2002–2005. The results are as follows: (1) the response of foF2 to geomagnetic activity in Hainan shows obvious diurnal variation except for the summer in low solar activity period. Generally, geomagnetic activity will cause foF2 to increase at daytime and decrease at nighttime. The intensity of response of foF2 is stronger at nighttime than that at daytime; (2) seasonal dependence of the response of foF2 to geomagnetic activity is very obvious. The negative ionospheric storm effect is the strongest in summer and the positive ionospheric storm effect is the strongest in winter; (3) the solar cycle has important effect on the response of foF2 to geomagnetic activity in Hainan. In high solar activity period, the diurnal variation of the response of foF2 is very pronounced in each season, and the strong ionospheric response can last several days. In low solar activity period, ionospheric response has very pronounced diurnal variation in winter only; (4) the local time of geomagnetic activities occurring also has important effect on the responses of foF2 in Hainan. Generally, geomagnetic activities occurred at nighttime can cause stronger and longer responses of foF2 in Hainan.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.