激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

应用于空空导弹火箭发动机的少烟丁羟固体推进剂

研究了应用于空空导弹发动机中的一种少烟、低燃温下羟推进剂。推进剂具有中等燃速、微波衰减量低、在＋７０—－４０℃内具有优良的力学性能，经受了测试冲击、温度循环、气动加热及各种环境考验。试验证明：该推进剂性能稳定、可靠。     

过失速飞机最速指向目标机动研究

基于飞机质点动力学模型建立了指向活动目标的终端条件,并进行最速指向机动动作的数值优化,其中用共轭梯度法寻优,用罚函数处理约束条件.计算结果表明,优化可以指导寻找对应于不同战术要求的有利机动过程;在近距空战中,具有快速改变航迹方向并进入过失速超大迎角机动的能力非常有利于快速指向目标、争取首攻机会,而改变航迹方向倾向于使用最大升力区迎角.     

考虑二次流影响的压缩系统稳定性模型

利用Ａｄｋｉｎｓ－Ｓｍｉｔｈ二次流模型计算得到转子出口截面落后角沿叶高的变化。在压缩系统稳定性模型中考虑叶尖流面落后的角影响，并提出一个新的时滞参数计算公式，计算结果表明，落后角的大小对压缩系统的稳定性影响很大，同时揭示了叶尖间隙对压缩系统稳定性的影响。     

惯导测试设备及其检测

阐述了惯导测试设备的作用、种类,介绍了其典型结构及基本精度指标的概念。说明了惯导测试设备的发展趋势;总体布局向卧式发展;轴系结构向有源磁悬浮发展;台体向复合材料球形壳体发展;输电装置向滚环发展;分度元件采用高精度的感应同步器。列举了检定技术的实例,说明了其发展方向:不断提高检定精度;开展动态检定;改善测量设备对三轴空间位置的适应性。此外,管理上要制度化,名词术语与数据处理要标准化,设计与检定要相协调。     

四足步行机运动机构及步态参数对行走稳定性影响分析

本文研究了四足步行机的行走稳定性问题,建立了考虑运动机构包括腿机构及其传动系统影响的稳定性模型;分析了各步态参数对稳定性的影响,并以研制的四足步行样机为例进行了计算机仿真。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

感应电动机的精确控制方法

利用非正则反馈线性化技术，对一类五阶感应电动机模型进行精确线性化，给出了控制器的显式表达式。