Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

IMP S-网络接口通信可靠性的改进

由于在Ｓ－网络上的ＩＭＰ Ｓ－网络接口在线路上存在自身的缺陷，往往使其与主控计算机之间的通信受阻。本文从线路上改进了ＩＭＰ Ｓ－网络接口，从而使通信更加稳定、可靠。     

横越两圆柱体的传热特性

用数值方法求解绕过两圆柱的对流传热问题。贝克列数在０－５０的范围内，了四种不同间距时的传热情况。从中发现两圆柱的传热特性相互有影响，这种影响随意距变化很敏感，两圆柱中任一个的平均谢尔特数总是小于单个圆柱的。并给出了简化计算的条件与公式。     

无人机飞行控制系统先进设计技术评述

首先简要回顾了无人机飞行控制系统经典设计方法,然后着重论述了目前国外在无人机飞行控制系统设计领域的最新研究成果,包括动态逆技术、BACKSTEPPING自适应技术及综合制导与控制技术。     

矩形截面弯管内气固两相流及对管壁磨损的数值分析

在便于描述矩形截面弯管流动的曲线坐标系中，计算了气固两相流，颗粒对管壁的磨损位置与磨损量。分析了弯管曲率、弯管安放方式、颗粒大小对磨损状况的影响。本文计算与实验数据比较，符合良好。     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

Parametric Modeling of Circuit Model for AC Glow Discharge in Air

In the parametric modeling of the circuit model for glow discharge in air,a new method for the design of glow discharge circuit model is presented.The new circuit model is an important reference for the design of plasma power supply,the simulation of glow discharge plasma actuator and the simulation of glow discharge plasma anemometer.The modeling approach consists in developing an electrical model of the glow discharge in air based on circuit components.The structure of the circuit model is established according to the theoretical analysis and the experimental device.Then the parameters of the circuit model are obtained based on the circuit analysis.Finally,the circuit model is verified by comparing the simulation current with the experimental current.This model takes into account the whole framework of the air glow discharge including the sheath and the plasma area.The built circuit model is feasible and reliable,thus being instructive for the investigation of the glow discharge in air.     

分析计算航天飞机气动系数的边界元局部方法

空间运载工具设计阶段为分析比较不同外形高超音速各流动领域的性能,广泛应用局部方法。在其原始形式下,形状函数计算繁复,并限于简单几何外形组成的轴对称体。用边界元局部方法进行形状函数计算,可免去原局部方法面积分的繁复和藉助表格的局限。对STS-1轨道飞行器外形进行计算得到丁形状函数,并根据实验数据确定领域系数。由此计算出飞行器的法向力、轴向力和俯仰力矩系数,计算结果与实验数据相符。     

1986年2月4日AR4711拱形双带黑子暗条系激活的分析

根据1986-02-04AR47ll由观测所确定的物理参数和特征值,采用电动力学方法数值计算该活动区中两个拱形黑子暗条在大耀斑爆发前的动力学演化过程.结果表明:(1)以旋涡黑子为标志的光球物质旋转运动和以暗条下方磁力线强剪切为特征的剪切运动引起暗条电流增加和背景磁场变化,电流和磁场的相互作用导致暗条向上运动,大耀斑爆发前暗条的上升速度达26km／S;(2)背景场位形对暗条整体动力学行为有很大影响,AR47ll在7×104km高度范围内场强随高度似乎按指数规律衰减.      

直升机旋翼载荷中的非线性强迫振动方程迭代算法

介绍用迭代方法求解直升机桨叶气动载荷中的非线性强迫振动方程。计算时,先假定诱导下洗已确定,求出桨叶的初始载荷;再通过非线性强迫振动方程求出弯－弯－扭弹性变形。以某一直升机为例,求出了桨叶的各阶谐波载荷和弹性变形。计算结果与实验数据吻合。