填充型聚合物基导热复合材料

简述了聚合物基导热复合材料的导热机理,总结了常用的导热模型及最新的模型研究进展,综述了影响聚合物基导热复合材料导热效果的因素,并展望了今后导热复合材料的研究方向.     

Design, implementation and evaluation of parallel pipelined STAP onparallel computers

Performance results are presented for the design and implementation of parallel pipelined space-time adaptive processing (STAP) algorithms on parallel computers. In particular, the issues involved in parallelization, our approach to parallelization, and performance results on an Intel Paragon are described. The process of developing software for such an application on parallel computers when latency and throughput are both considered together is discussed and tradeoffs considered with respect to inter and intratask communication and data redistribution are presented. The results show that not only scalable performance was achieved for individual component tasks of STAP but linear speedups were obtained for the integrated task performance, both for latency as well as throughput. Results are presented for up to 236 compute nodes (limited by the machine size available to us). Another interesting observation made from the implementation results is that performance improvement due to the assignment of additional processors to one task can improve the performance of other tasks without any increase in the number of processors assigned to them. Normally, this cannot be predicted by theoretical analysis     

基于N-S方程的加油机对受油机气动干扰研究

空中加受油时,加油机尾流场会对受油机产生复杂的流动干扰。采用基于Navier-Stokes(N-S)方程的CFD方法分析加油机尾流场,并对加油机、受油机之间的气动干扰进行一体化模拟研究;系统地分析加油机不同迎角及双机不同高度差、不同侧向距离、不同前后位置时,受油机的纵向、横航向气动力特性。结果表明：典型状态下,加油机迎角增大,对受油机的气动干扰增强;高度差越大,对受油机气动干扰越小;侧向距离越大,对受油机气动干扰先增加后减小;前后距离对受油机的影响较小。     

Velocity pointing error analysis for symmetric spinning thrusting Cubesat

To solve the problem of thrust vector misalignment from the Cubesat center of mass during orbital maneuver, spin-stabilized method is applied to eliminate velocity pointing error. Spinning thrusting Cubesat model involves the effects of mass variation and jet damping is established. Analytical solutions for the angular velocity, nutation angle, Euler angle, and inertial velocity with nonzero initial conditions are derived. Simulations show that the analytical solutions closely match numerical simulations. Based on the analytical solutions, the velocity pointing error influencing factors is analyzed. The results show that the velocity pointing error caused by initial transverse velocity, nutation angle and transverse disturbance torque can be reduced by raising the spin rate, but the initial Euler angle need to be limited. Also, the spinning thrusting maneuver can allow for a lower spin rate by increasing the axial moment of inertia.     

有源集成背馈式接收天线设计

为了提高接收天线系统的增益以及灵敏度,对于天线与射频前端组成的接收系统采用了一种有源集成接收天线的设计方案,从而省略了传统设计中的有源电路与微带天线之间的匹配网络.依照此方案,设计并实现了一个背馈结构的矩形微带天线与前级低噪声放大器电路的有源集成.矩形微带天线的馈电点与低噪声放大器的输入端通过金属探针相连,当天线在2.48?GHz谐振时,通过选择合适的馈电点位置,天线产生放大器设计所需的输入阻抗.有源集成背馈式接收天线工作于S波段,最终的测试结果显示了其优良的特性.     

通用CAPP系统结构及其实现方法

在阐述通用ＣＡＰＰ（Ｃｏｍｐｕｔｅｒ－ａｉｄｅｄ ｐｒｏｃｅｓｓ ｐｌａｎｎｉｎｇ）系统应满足的条件和需要解决的问题的基础上，针对目前ＣＡＰＰ系统存在的不可移植、开发成本高等缺陷，对工艺信息属性进行了分析，采用软件框架与处理方法分离，对系统进行初始化、流程苑点的可重构等策略，提出通用ＣＡＰＰ系统的功能与结构。给出了资源适配器的构造方法和规则学习、更新、扩充的实现方法，经在ＡｕｔｏＰｒｏｃｅｓｓ系统     

Calibration of robotic drilling systems with a moving rail

Industrial robots are widely used in aircraft assembly systems such as robotic drilling systems. It is necessary to expand a robot＇s working range with a moving rail. A method for improving the position accuracy of an automated assembly system with an industrial robot mounted on a moving rail is proposed. A multi-station method is used to control the robot in this study. The robot only works at stations which are certain positions defined on the moving rail. The calibration of the robot system is composed by the calibration of the robot and the calibration of the stations.The calibration of the robot is based on error similarity and inverse distance weighted interpolation.The calibration of the stations is based on a magnetic strip and a magnetic sensor. Validation tests were performed in this study, which showed that the accuracy of the robot system gained significant improvement using the proposed method. The absolute position errors were reduced by about 85%to less than 0.3 mm compared with the maximum nearly 2 mm before calibration.     

1700℃热校准风洞

１７００℃热本单位风洞是一台高温、高速的稳态与动态温度校准装置。本文介绍了１７００℃热校准风洞的主要性能和特点，以及为此而采取的保温与冷却相结合的结构设计、高温内壳设计和其它的一些技术方法。     

隐身卫星的现状及其在空间攻防中的应用

空间攻防是空间技术的一个主要研究内容。隐身卫星正以独特的优势在空间对抗领域中发挥重要作用。首先论述了卫星隐身的主要手段,其次分析了国内外隐身卫星的发展现状,最后详细介绍了隐身卫星在未来空间攻防中的应用前景。