推进剂管路充填过程的数值模拟

基于一维管路瞬变流理论,利用特征线有限差分法,建立了推进剂供应系统管路充填过程的数学模型.利用坐标变换方法,将管路内液体与时间相关的求解区域变换为求解较方便的固定求解区域,很好地处理了模型的移动边界问题.对由贮箱、隔离阀、管道组成的系统充填过程进行了仿真计算,并将计算结果与传统的采用特征线方法获得的结果进行对比分析,验证了方法的有效性.进一步研究了最大压力峰值的影响因素,结果表明:增多初始气体压力、减小贮箱压力、增多多变指数可有效减小最大压力峰值.      

环境试验设备的状态空间法仿真设计

对于环境试验设备的设计,传统的工程设计方法是从指标出发,用半经验、稳态的方法设计系统,按照围护结构稳态放热量和试品冷透来计算制冷系统容量,这种稳态的计算结果通常比实际需要大的多.采用基于状态空间描述的分布参数模型用于系统动态仿真,可以允许对许多先不必要考虑的环节简化处理,对主要的负荷如围护结构、被试品等做精确的处理,可以较准确的得到总的制冷量需求,验证控制策略等,对于初期方案设计中系统制冷、加热设备容量的准确计算、不同方案的验证、控制方案的制定具有明显的意义.      

Optimal assimilation for ionospheric weather – Theoretical aspect

Observation, specification and prediction of ionospheric weather are the key scientific pursuits of space physicists, which largely based on an optimal assimilation system. The optimal assimilation system, or commonly called data assimilation system, consists of dynamic process, observation system and optimal estimation procedure. We attempt to give a complete framework in this paper under which the data assimilation procedure carries through. We discuss some crucial issues of data assimilation as follows: modeling a dynamic system for ionospheric weather; state estimation for static or steady system in sense of optimization and likelihood; state and its uncertainty estimation for dynamic process. Meanwhile we also discuss briefly the observability of an observation system; system parameter identification. Some data assimilation procedures existed at present are reviewed in the framework of this paper. As an example, a second order dynamic system is discussed in more detail to illustrate the specific optimal assimilation procedure, ranging from modeling the system, state and its uncertainty calculation, to the quantitatively integration of dynamic law, measurement to significantly reduce the estimation error. The analysis shows that the optimal assimilation model, with mathematical core of optimal estimation, differs from the theoretical, empirical and semi-empirical models in assimilating measured data, being constrained by physical law and being optimized respectively. The data assimilation technique, due to its optimization and integration feature, could obtain better accurate results than those obtained by dynamic process, measurement or their statistical analysis alone. The model based on optimal assimilation meets well with the criterion of the model or algorithm assessment by ‘space weather metrics’. More attention for optimal assimilation procedure creation should be paid to transition matrix finding, which is usually not easy for practical space weather system. High performance computing hardware and software studies should be promoted further so as to meet the requirement of large storage and extensive computation in the optimal estimation. The discussion in this paper is appropriate for the static or steady state or transition process of dynamic system. Many phenomena in space environment are unstable and chaos. So space environment study should include and integrate these two branches of learning. This revised version was published online in August 2006 with corrections to the Cover Date.     

碳纤维表面特性对防热材料烧蚀性能影响的研究

为了提高碳／酚醛防热材料的烧蚀性能，着重对碳纤维的表面特性进行了分析研究。结果表明，碳纤维的表面状态对防热材料烧蚀性能有很大的影响，其中主要的影响因素是纤维的捻度和浆料。为了改善材料在高状态试验条件下的烧蚀性能，降低纤维的捻度和上浆量是必需的。     

顾客满意指数的结构方程模型与应用

分析了经典的顾客满意指数的结构关系模型的基本原理;结合企业顾客满意指数测评的实际案例,给出了结合偏最小二乘回归(PLS)方法的顾客满意指数测评的线性结构关系(LISREL)路径分析的实施途径。此外,还通过控制某些中间变量的作用,研究了原因变量对结果变量影响作用分解的一般模式。     

原位钛基复合材料中TiB的生成热力学及动力学

采用自蔓延高温合成（SHS）、感应熔炼和熔模精铸相结合的方法，利用Ti—B—Al体系制备出了原位自生TiB增强的钛基复合材料。借助XRD、SEM和TEM分析了复合材料的物相和增强体的形态。结果表明：在复合材料中只存在TiB增强体和Ti，无TiAl3杂质相形成，TiB增强体呈柱状短纤维，这与其B27晶体结构有关，且增强体／基体界面清洁无杂质污染，并从热力学和动力学两方面论述了在Ti—B—Al体系中制备TiB增强体的生成机制：在Ti-B—Al体系中，Al首先受热熔化使得Ti和B相继溶解于Al液中；Ti与Al之间先行发生化学反应形成Ti—Al金属间化合物，放出的热量进一步引发了溶解于液相中的B和Ti产生高温自蔓延形成Ti—B化合物。以热力学理论分析，应最终形成TiB2，但实际上由于动力学影响，最终形成了TiB。     

Fuzzy robust nonlinear control approach for electro-hydraulic flight motion simulator

A fuzzy robust nonlinear controller for hydraulic rotary actuators in flight motion simulators is proposed. Compared with other three-order models of hydraulic rotary actuators, the proposed controller based on first-order nonlinear model is more easily applied in practice, whose control law is relatively simple. It not only does not need high-order derivative of desired command,but also does not require the feedback signals of velocity, acceleration and jerk of hydraulic rotary actuators. Another advantage is that it does not rely on any information of friction, inertia force and external disturbing force/torque, which are always difficult to resolve in flight motion simulators. Due to the special composite vane seals of rectangular cross-section and goalpost shape used in hydraulic rotary actuators, the leakage model is more complicated than that of traditional linear hydraulic cylinders. Adaptive multi-input single-output(MISO) fuzzy compensators are introduced to estimate nonlinear uncertain functions about leakage and bulk modulus. Meanwhile, the decomposition of the uncertainties is used to reduce the total number of fuzzy rules. Different from other adaptive fuzzy compensators, a discontinuous projection mapping is employed to guarantee the estimation process to be bounded. Furthermore, with a sufficient number of fuzzy rules, the controller theoretically can guarantee asymptotic tracking performance in the presence of the above uncertainties, which is very important for high-accuracy tracking control of flight motion simulators.Comparative experimental results demonstrate the effectiveness of the proposed algorithm, which can guarantee transient performance and better final accurate tracking in the presence of uncertain nonlinearities and parametric uncertainties.     

PR方程推算氮气/灭火剂蒸气等熵指数

氮气(N2)/灭火剂蒸气组成的混合气体的容积等熵指数和温度等熵指数随充填压力和温度的变化关系是影响机载灭火系统灭火剂释放过程的重要因素。基于PR(Peng Robinson)方程和范德瓦尔混合规则,编制了N2/灭火剂混合气体的容积等熵指数和温度等熵指数的计算程序,计算了三组混合气体N2/HFC227ea、N2/CF3I和N2/CF3Br充填压力分别为42MPa和25MPa,初始温度为293K时等熵指数随温度的变化曲线。结果表明:它们的容积等熵指数和温度等熵指数随着温度的升高而逐渐下降,呈近似线性关系。在相同温度下,充填压力为42MPa时的三组混合物的容积等熵指数和温度等熵指数均高于充填压力25MPa时的结果。在相同的充填压力和温度下,N2/CF3I的等熵指数最大,其次为N2/HFC227ea和N2/CF3Br的最小。      

基于序列图像的无人机自测速方法与试验

为自主、精确测量无人机的飞行速度,研究并发展了一种基于序列图像的无人机自测速方法并进行了相应的试验。该方法利用无人机上已有的惯导装置、高度计和摄像机,在连续成像的条件下,通过匹配跟踪得到地面同名点在相邻两帧光学或红外实时图中的位置,利用飞行高度、姿态信息和成像帧频计算得到无人机的瞬时飞行速度。在无人机的匀速平飞段,通过大量数据拟合得到高精度的平均飞行速度。通过挂飞试验对方法进行了验证,实时得到了小于0.2 m/s的测速结果,满足工程要求的精度,为工程应用打下了一定的基础。     

图书分类专家系统

本文介绍图书分类专家系统,并详细论述系统规则库的建立及其设计方法.