基于材料微观特性的涡轮盘疲劳裂纹萌生寿命数值仿真

 为了研究材料微观特性对结构疲劳寿命的影响,根据Tanaka-Mura疲劳裂纹萌生寿命计算理论,模拟某镍基粉末合金涡轮盘喉道表面疲劳裂纹萌生寿命。利用泰森多边形生成法,模拟微观多晶结构,建立宏-细观模型相结合的三维仿真模型。实现3项关键技术:1)在三维模型中模拟了面心立方晶体中{111}面族的12条主滑移系;2)应用缺口根部裂纹萌生的Tanaka-Mura理论模型模拟一条微裂纹在另一条裂纹尖端萌生;3)模拟了微裂纹的起裂、扩展与联合过程,最终形成一条宏观裂纹。对某表面带刀痕涡轮盘疲劳裂纹萌生寿命数值仿真结果与真盘试验结果相差20%。研究表明,减小晶粒尺寸、降低表面粗糙度、形成表面压缩残余应变以及析出沉淀颗粒都有利于提高涡轮盘的疲劳裂纹萌生寿命。     

舰载遥测设备伺服跟踪视轴稳定方法研究

论述了舰船摇摆对视轴稳定的影响,给出了由于舰船摇摆所引起的视轴附加角速度公式;分析了陀螺稳定回路的性能,给出了数学模型。所采用的视轴稳定方法,经过海上试验,船摇隔离度满足技术指标的要求。     

A Celestial Analytic Positioning Method by Stellar Horizon Atmospheric Refraction

This article, in allusion to the limitation of conventional stellar horizon atmospheric refraction based on orbital dynamics model and nonlinear Kalman filter in practical applications, proposes a new celestial analytic positioning method by stellar horizon atmospheric refraction for high-altitude flight vehicles, such as spacecraft, airplanes and ballistic missiles. First, by setting up the geometric connexion among the flight vehicle, the Earth and the altitude of starlight refraction, an expression for the relationship of starlight refraction angle and atmospheric density is deduced. Second, there are produced a novel measurement model of starlight refraction in a continuous range of altitudes (CRA) from 20 km to 50 km on the basis of the standard atmospheric data in stratosphere, and an empirical formula of stellar horizon atmospheric refraction in the same altitudes against the tangent altitude. Third, there is introduced a celestial analytic positioning algorithm, which uses the least square differential correction instead of nonlinear Kalman filter. The information about positions of a flight vehicle can be obtained directly by solving a set of nonlinear measurement equations. The stellar positioning algorithm adopts the characteristics of stellar horizon atmospheric refraction thereby removing needs for orbit dynamics models and priori knowledge of flight vehicles. The simulation results evidence the validity of the proposed stellar positioning algorithm.     

Assessing attitude error of FORMOSAT-3/COSMIC satellites and its impact on orbit determination

An attitude determination and control system (ADCS) is critical to satellite attitude maneuvers and to the coordinate transformation from the inertial frame to the spacecraft frame. This paper shows specific sensors in the ADCS of the satellite mission FORMOSAT-3/COSMIC (F3/C) and the impact of the ADCS quality on orbit accuracy. The selection of main POD antenna depends on the beta angles of the different F3/C satellites (for FM2 and FM4) during the inflight phase. In particular, under the eclipse, alternative attitude sensors are activated to replace the Sun sensors, and such a sensor change leads to anomalous GPS phase residuals and a degraded orbit accuracy. Since the nominal attitude serves as a reference for ADCS, the 3-dimensional attitude-induced errors in reduced dynamic orbits over selected days in 2010 show 9.35, 10.78, 4.97, 5.48, 7.18, and 6.89 cm for FM1–FM6. Besides, the 3-dimensional velocity errors induced by the attitude effect are 0.10, 0.10, 0.07, 0.08, 0.09, and 0.10 for FM1–FM6. We analyze the quality of the observed attitude transformation matrix of F3/C and its impact on kinematic orbit determination. With 249 days of GPS in 2008, the analysis leads to the following averaged 3-dimensional attitude-induced orbit errors: 2.72, 2.62, 2.37, 1.90, 1.70, and 1.99 cm for satellites FM1–FM6. Critical suggestions of geodetic payloads for the follow-on mission of F3/C are presented based on the current result.     

A generalized rough set-based information filling technique for failure analysis of thruster experimental data

Interval-valued data and incomplete data are two key problems for failure analysis of thruster experimental data and have been basically solved by the proposed methods in this paper. Firstly, information data acquired from the simulation and evaluation system formed as intervalvalued information system （IIS） is classified by the interval similarity relation. Then, as an improvement of the classical rough set, a new kind of generalized information entropy called ＂H＇-information entropy＂ is suggested for the measurement of uncertainty and the classification ability of IIS. There is an innovative information filling technique using the properties of H＇-information entropy to replace missing data by some smaller estimation intervals. Finally, an improved method of failure analysis synthesized by the above achievements is presented to classify the thruster experimental data, complete the information, and extract the failure rules. The feasibility and advantage of this method is testified by an actual application of failure analysis, whose performance is evaluated by the quantification of E-condition entropy.     

热变形纳米晶永磁环自锁阀锁闭特性研究

为了减轻宇航推进系统用自锁阀的重量,采用理论、数值仿真和试验相结合的方法对永磁环材料进行了研究。研究结果表明,和传统材料相比,新型永磁材料在性能上更优,装上新型永磁材料的自锁阀的锁闭特性有很大程度的优化,而且自锁阀的体积更小、重量更轻。     

无界域上二次规划存在最优解的条件及判别方法

本文给出了无界域上二次规划存在最优解的充分必要条件及判别方法，并通过解一些线性规划来判别是否存在最优解。     

RMI原则在数学计算中的应用

本文叙述了RMI原则的一些基本概念,例举了RMI原则在数学分析、线性代数、积分变换和概率论中的应用。     

VGA文本状态下显示汉字的方法

本文涉及的是微机的实用技术,即如何在西文系统下,使用西文软件直接编制汉字的应用软件的方法。这对于充分利用进口的软件资源,开发和善及微机在民航中的应用软件起到促进作用。在本文中具体给出了如何使用 TURBOC 编制汉字应用软件的方法。     

EXPERIMENTAL STUDY ON THE INFRARED RADIATION CHARACTERISTICS FROM HOT JET

ＥＸＰＥＲＩＭＥＮＴＡＬＳＴＵＤＹＯＮＴＨＥＩＮＦＲＡＲＥＤＲＡＤＩＡＴＩＯＮＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＦＲＯＭＨＯＴＪＥＴＳｈａｎＱｉｘｉａｎｇ；ＢｕＭａｎ（ＣｏｌｌｅｇｅｏｆＳｃｉｅｎｃｅ，ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕ...