Deformation of the Envelope of a Broadband Signal during Propagation through the Martian Ionosphere

The regularities of propagation along the spacecraft-Martian surface-spacecraft path of a broadband Gaussian pulse in the condition of its dispersion distortions are considered in application to the problem of radiowave pulse sounding of the near-surface soil of Mars from onboard a satellite. The Martian night-side ionosphere reduces the energy considerably but does not lead to any distortion of the pulse envelope. At the sounding of a two-layer surface, the ionosphere influence, together with the signal absorption, manifests as the lower limit of the thickness of the upper layer reached for measurements in the scope of the planned experiment [1].     

Structural optimization of lifting surfaces with regard to static aeroelasticity

A technique for choosing a rational load-carrying scheme and weight analysis at the early stages of designing lifting surfaces with the use of a special model of the finite element method is proposed. The distribution of structure loads is determined with regard for its deformation. The numerical example is presented.     

Alternative statements of optimal load-bearing structure design problems

We analyze the well-known statements of optimal design problems for load-bearing maximum rigidity structures in which a principle of the minimum of total potential energy of structure deformation is used. A version of the generalized statement of optimization problems for processes described by linear equations with a symmetric operator is proposed. On the basis of the version outlined, we present a mathematical algorithm for obtaining beam structures of maximum rigidity, in which the finite element method is used to solve an analytical problem. We give the numerical results of solving two problems of optimal design of maximum rigidity structures that are simulated by cantilever and statically indeterminate beams.     

The use of solutions to problems of spacecraft trajectory optimization in impulse formulation when solving the problems of optimal control of trajectories of a spacecraft with limited thrust engine: II

As examples of application of the technique suggested in the first part of this work, the problems of optimizing the trajectories of spacecraft transfers between circular coplanar orbits are considered in this second part. During the transfer the spacecraft is controlled by the vector of thrust of a limited-thrust jet engine. The mass consumption is minimized for a limited time of transfer. Extreme trajectories with two and three powered sections (Homan-type and bi-elliptic transfer trajectories) are numerically determined. The solution of these well-studied problems allows one to compare the results of applying the suggested technique with the results of application of other previously used techniques.     

Internal Gravitational Field of a Thin Homogeneous Ring

The potential of gravity forces is found inside a thin homogeneous ring when the ring’s mean radius is much larger than the diameter of its cross section. Rings with elliptic and almost circular cross sections are considered.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 4, 2005, pp. 260–268.Original Russian Text Copyright © 2005 by Kasatkin.     

Physiologic and metabolic responses of wheat seedlings to elevated and super-elevated carbon dioxide

The metabolic consequence of suboptimal (400 μmol mol⁻¹ or ppm), near-optimal (1500 ppm) and supra-optimal (10,000 ppm) atmospheric carbon dioxide concentrations [CO₂] was investigated in an attempt to reveal plausible underlying mechanisms for the differential physiological and developmental responses to increasing [CO₂]. Both non-targeted and targeted metabolite profiling by GC–MS and LC–MS were employed to examine primary and secondary metabolites in wheat (Triticum aestivum, cv Yocoro rojo) continuously exposed to these [CO₂] levels for 14, 21 and 28 days. Metabolite profile was altered by both [CO₂] and physiological age. In general, plants grown under high [CO₂] exhibited a metabolite profile characteristic of older plants under ambient CO₂. Elevated [CO₂] resulted in higher levels of phosphorylated sugar intermediates, though no clear trend in the content of reducing sugars was observed. Transient starch content was enhanced by increasing [CO₂] to a much greater extent at 10,000 ppm CO₂ than at 1500 ppm CO₂. The percentage increase of starch content resulting from CO₂ enrichment declined as plants develope. In contrast, elevated [CO₂] promoted the accumulation of secondary metabolites (flavonoids) progressively to a greater extent as plants became mature. Elevated [CO₂] to 1500 ppm induced a higher initial growth rate, while super-elevated [CO₂] appeared to negate such initial growth promotion. However, after 4 weeks, there was no difference in vegetative growth between 1500 and 10,000 ppm CO₂-grown plants, both elevated CO₂ levels resulted in an overall 25% increase in biomass over the control plants. More interestingly, elevated atmospheric [CO₂] reduced evapotranspiration rate (ET), but further increase to the supra-optimal level resulted in increased ET (a reversed trend), i.e. ET at 1500 ppm < ET at 10,000 ppm < ET at 400 ppm. The differential effect of elevated and super-elevated CO₂ on plants was further reflected in the nitrogen dynamics. These results provide the potential metabolic basis for the differential productivity and stomatal function of plants grown under elevated and super-elevated CO₂ levels.     

Comparative ISS accelerometric analyses

Two accelerometric records coming from the SAMSes es08 sensor in the Columbus module, the so-called Runs 14 and 33 in terms of the IVIDIL experiment, has been studied here using standard digital signal analysis techniques. The principal difference between both records is the vibrational state of the IVIDIL experiment, that is to say, during Run 14 the shaking motor of the experiment is active while that in Run 33 this motor is stopped. Identical procedures have been applied to a third record coming from the SAMSII 121f03 sensor located in the Destiny module during an IVIDIL quiescent period. All records have been downloaded from the corresponding public binary accelerometric files from the NASA Principal Investigator Microgravity Services, PIMS website and, in order to be properly compared, have the same number of data. Results detect clear differences in the accelerometric behavior, with or without shaking, despite the care of the designers to ensure the achievement of the ISS μg-vibrational requirements all along the experiments.     

Parameters of a creasing-bending machine as applied to the scheme of transverse rotary shaping of chevron structures

Based on the topological representation and transformation of the elementary chevron structure module, we propose the dependences that relate the geometrical parameters of rollers with the chevron structure element sizes for the transverse scheme of rotary creasing and bending. The calculation scheme is realized in the form of the parametrized geometrical model using CAD SolidWorks aids.     

An algorithm for solving three-dimensional problem of elasticity theory for transversally isotropic medium

An algorithm for solving a boundary-value problem of deforming structures made of composite materials is considered. The polynomial solutions of the equation system for the linear theory of elasticity for the anisotropic medium in displacements are used in this algorithm.